SS52F_V01 CHENDA | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Features
The plastic package carries Underwriters Laboratory Flammability Classification 94V-0 For surface mounted applications Metal silicon junction,majority carrier conduction Low power loss,high efficiency Built-in strain relief,ideal for automated placement High forward surge current capability High temperature soldering guaranteed: 260 °C/10 seconds at terminals Mechanical Data Case: JEDEC SMAF molded plastic body Terminals: Solderable per MIL-STD-750,Method 2026 Polarity: Color band denotes cathode end Mounting Position: Any Weight : 0.0018 ounce, 0.064 grams Parameter SYMBOLS SS52F SS53F SS54F SS55F SS56F SS58F SS510F SS5150F SS5200F UNITS Marking Code MDD SS52F MDD SS53F MDD SS54F MDD SS55F MDD SS56F MDD SS58F MDD SS510F MDD SS5150F MDD SS5200F Maximum repetitive peak reverse voltage VRMM 20 30 40 50 60 80 100 150 200 V Maximum RMS voltage VRMS 14 21 28 35 42 56 70 105 140 V Maximum DC blocking voltage VDC 20 30 40 50 60 80 100 150 200 V Maximum average forward rectified current at TL(see fig.1) I(AV) 5.0 A Peak forward surge current 8.3ms single half sine-wave superimposed onrated load (JEDEC Method) IFSM 150 A Maximum DC reverse current TA=25℃ at rated DCblocking voltage TA=125℃ IR 0.5 0.2 mA20.0 10.0 2.0 Typical junction capacitance (NOTE 1) CJ 200 pF Typical thermal resistance (NOTE 2) RJA 75.0 ℃/W Operating junction temperature range TJ -55 to +125 ℃ Storage temperature range TSTG -55 to +150 ℃ 3.The typical data above is for reference only.
Rev:2019A0 Page :2 Typical Characterisitics The curve above is for reference only. https://www.microdiode.com SS52F THRU SS5200F Reverse Voltage - 20 to 200 Volts Forward Current - 5.0 Ampere 5.0 4.0 3.0 2.0 1.0 0 25 50 75 100 125 150 175 150 120 0.1 1.0 10 100 0.01 0.1 1 10 100 100 0.1 REVERSE VOLTAGE,VOLTS t,PULSE DURATION,sec. FIG. 5-TYPICAL JUNCTION CAPACITANCE FIG. 6-TYPICAL TRANSIENT THERMAL IMPEDANCE NUMBER OF CYCLES AT 60 Hz FIG. 2-MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG. 1- FORWARD CURRENT DERATING CURVE AVERAGE FORWARD RECTIFIED CURRENT, AMPERESJUNCTION CAPACITANCE, pF PEAK FORWARD SURGE CURRENT, AMPERES 1 10 100 8.3ms SINGLE HALF SINE-WAVE (JEDEC Method) 100 1000 2000 0 20 40 60 80 100 100 0.1 0.01 0.001 TJ=75 C TJ=25 C TJ=100 C PERCENT OF PEAK REVERSE VOLTAGE,% FIG. 4-TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, MILLIAMPERES TRANSIENT THERMAL IMPEDANCE, C/W AMBIENT TEMPERATURE, C SS52F-SS56F SS58F-SS5200F Single Phase Half Wave 60Hz Resistive or inductive Load FIG. 3-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANTANEOUS FORWARD CURRENT,AMPERES INSTANTANEOUS FORWARD VOLEAGE, VOLTS TJ=25 C 10.0 0.1 0.01 SS52F-SS54F SS55F-SS56F SS58F-SS5150F TJ=25 C SS5200F
https://www.microdiode.com Rev:2019A0 Page :3 Important Notice and Disclaimer Microdiode Electronics (Jiangsu) reserves the right to make changes to this document and its products and specifications at any time without notice. Customers should obtain and confirm the latest product information and specifications before final design,purchase or use. Microdiode Electronics (Jiangsu) makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, not does Microdiode Electronics (Jiangsu) assume any liability for application assistance or customer product design. Microdiode Electronics (Jiangsu) does not warrant or accept any liability with products which are purchased or used for any unintended or unauthorized application. No license is granted by implication or otherwise under any intellectual property rights of Microdiode Electronics (Jiangsu). Microdiode Electronics (Jiangsu) products are not authorized for use as critical components in life support devices or systems without express written approval of Microdiode Electronics (Jiangsu). Suggested Pad Layout E B d F W PA D D1D2 C T Note:Devices are packed in accor dance with EIA standar RS-481-A and specifications listed above. Reel packing SMAF 7" 3,000 4.0 6,000 210*208*203 178 400*265*400 120,000 10.0 PACKAGE REEL SIZE REEL COMPONENT SPACING BOX INNER BOX REEL DIA, CARTON SIZE CARTON APPROX. GROSS WEIGHT (kg)(pcs)(m/m)(m/m)(m/m)(pcs)(m/m)(pcs) SS52F THRU SS5200F Reverse Voltage - 20 to 200 Volts Forward Current - 5.0 Ampere unit:mm Item Symbol Tolerance SMAF Carrier width A 0.1 2.80 Carrier length B 0.1 4.75 Carrier depth C 0.1 1.42 Sprocket hole d0 . 0 5 1 . 5 0 7" Reel outside diameter D 2.0 178.00 7" Reel inner diameter D1 min 54.40 Feed hole diameter D2 0.5 13.00 Sprocket hole position E 0.1 1.75 Punch hole position F 0.1 5.05 Punch hole pitch P 0.1 4.00 Sprocket hole pitch P0 0.1 4.00 Embossment center P1 0.1 2.00 Overall tape thickness T 0.1 0.30 Tape width W 0.3 8.00 Reel width W1 1.0 12.30 Symbol Unit (mm) Unit (inch) A1 .8 0 .071 B1 .6 0 .063 C3 .8 0 .150 D2 .2 0 .087 E5 .4 0 .213