SS22L TSC | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Features
For surface mounted application Low –PROFILE PACKAGE Ideal for automated placement Low power loss, high efficiency High temperature soldering: 260 o C / 10 seconds at terminals Mechanical Data Cases: Sub SMA plastic case Polarity: Color band denotes cathode end Packaging: 12mm tape per EIA STD RS-481 Weight approx. 15mg Sub SMA Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Type Number Symbo l SS 22L SS 23L SS 24L SS 25L SS 26L SS 29L SS 210L Units Maximum Recurrent Peak Reverse Voltage VRRM 20 30 40 50 60 90 100 V Maximum RMS Voltage VRMS 14 21 28 35 42 63 70 V Maximum DC Blocking Voltage VDC 20 30 40 50 60 90 100 V Marking Code (Note 4) 22LYM 23LYM 24LYM 25LYM 26LYM 29LYM 210LYM Maximum Average Forward Rectified Current at TL(See Fig. 1) I(AV) 2.0 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 50 A Maximum Instantaneous Forward Voltage (Note 1) @ 2.0A VF 0.5 0.70 0.85 V 0.4 0.1 Maximum DC Reverse Current @ T A =25℃ at Rated DC Blocking Voltage @ T A=100℃ IR 20 10.0 20 mA mA Typical Junction Capacitance (Note 3) Cj 130 pF Typical Thermal Resistance ( Note 2 ) R θJL R θJA ℃/W ℃/W Operating Temperature Range T J -65 to +125 -65 to +150 ℃ Storage Temperature Range T STG -65 to +150 ℃ Notes: 1. Pulse Test with PW=300 usec, 1% Duty Cycle 3. Measured at 1 MHz and A pplied Reverse Voltage of 4.0V D.C. 4. 22LYM: 2=2A, 2-20V, L- Low Profile, Y-Year Code, M-Month Code. 12.31.2004/ rev. A Preliminary
RATINGS AND CHARACTERISTIC CURVES (SS22L THRU SS210L) FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PEAK FOR WARD SURGE CURRENT . (A) 1 10 100 NUMBER OF CYCLES AT 60Hz 8.3ms Single Half Sine Wave JEDEC Method AT RATED TL Tj=150 C0 FIG.3- TYPICAL FORWARD CHARACTERISTICS INSTANTANEOUS FOR WARD CURRENT . (A) 0.01 0.1 10.0 FORWARD VOLTAGE. (V) Tj=125 C0 Tj=25 C0 PULSE WIDTH=300 S 1% DUTY CYCLE SS22L-SS24L SS25L-SS26L SS29L-SS210L FIG.4- TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT . (mA) 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) TA=125 C0 TA=75 C0 TA=25 C0 0.001 0.01 0.1
100 SS22L-SS24L
FIG.5- TYPICAL JUNCTION CAPACITANCE JUNCTION CAP ACITANCE.(pF) 0.1 1 10 100 100 400 REVERSE VOLTAGE. (V) SS29L-SS210L SS22L-SS24L SS25L-SS26L Tj=25 C f=1.0MHz Vsig=50mVp-p FIG.1- MAXIMUM FORWARD CURRENT DERATING CURVE AVERAGE FOR WARD CURRENT . (A) 50 60 70 80 90 100 110 120 160 150140130 .50 1.0 2.0 1.5 LEAD TEMPERATURE. ( C) o RESISTIVE OR INDUCTIVE LOAD SS2L2-SS24L SS25L-SS210L PCB MOUNTED ON 0.2X0.2" (5.0X5.0mm) COPPER PAD AREAS