SS22 SSC | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

SCHOTTKY BARRIER RECTIFIERS 04/05/2007 Rev.1.00 www.SiliconStandard.com 1 PRODUCT SUMMARY

2.0 AMPS Surface Mount

FEATURES

For surface mounted application Easy pick and place Metal to silicon rectifier, majority carrier conduction Low power loss, high efficiency High current capability, low VF High surge current capability Plastic material used carriers Underwriters Laboratory Classification 94V-0 Epitaxial construction High temperature soldering: 260 o C / 10 seconds at terminals MECANICAL DATA Case: Molded plastic Terminals: Pure tin plated, lead free. Polarity: Indicated by cathode band Packaging: 12mm tape per EIA STD RS-481 Weight: 0.093gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% o C ambient temperature unless otherwise specified. Maximum Recurrent Peak Reverse Voltage VRRM 20 30 40 50 60 90 100 150 V Maximum RMS Voltage VRMS 14 21 28 35 42 63 70 105 V Maximum DC Blocking Voltage VDC 20 30 40 50 60 90 100 150 V Maximum Average Forward Rectified Current at TL(See Fig. 1) I(AV) 2.0 A Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) IFSM 50 A Maximum Instantaneous Forward Voltage (Note 1) IF= 2.0A @ 25oC @ 100oC VF 0.5 0.4 0.70 0.65 0.85 0.70 0.95 0.80 V 0.4 0. 1 Maximum DC Reverse Current @ TA =25 oC at Rated DC Blocking Voltage @ TA=125 oC IR 10 5. 0 mA mA Typical Junction Capacitance (Note 3) Cj 130 pF Typical Thermal Resistance ( Note 2 ) R θJL R θJA oC/W Operating Temperature Range TJ -65 to +125 -65 to +150 oC Storage Temperature Range TSTG -65 to +150 oC Notes: 1. Pulse Test with PW=300 usec, 1% Duty Cycle 3. Measured at 1 MHz and Applied Reverse Voltage of 4.0V D.C. Type Number Symbol SS SS SS SS SS SS SS 210 SS 215 Units Pb-free; RoHS-compliant Dimensions in inches and (millimeters) .083(2.10) .077(1.95) .012(.31) .006(.15) .012(.31) .006(.15) .008(.20) .004(.10) .056(1.41) .035(0.90) .147(3.73) .137(3.48) .187(4.75) .167(4.25) .103(2.61) .078(1.99) .209(5.30) .201(5.10) SMB/DO-214AA

04/05/2007 Rev.1.00 www.SiliconStandard.com 2 Information furnished by Silicon Standard Corporation is believed to be accurate and reliable. However, Silicon Standard Corporation makes no guarantee or warranty, expressed or implied, as to the reliability, accuracy, timeliness or completeness of such information and assumes no responsibility for its use, or for infringement of any patent or other intellectual property rights of third parties that may result from its use. Silicon Standard reserves the right to make changes as it deems necessary to any products described herein for any reason, including without limitation enhancement in reliability, functionality or design. No license is granted, whether expressly or by implication, in relation to the use of any products described herein or to the use of any information provided herein, under any patent or other intellectual property rights of Silicon Standard Corporation or any third parties. FIG.2- MAXIMUM NON-REPETITIVE FOR WARD SURGE CURRENT PEAK FOR W ARD SURGE CURRENT .(A) 1 10 100 NUMBER OF CYCLES AT 60Hz 8.3ms Single Half Sine Wave JEDEC Method AT RATED TL FIG.3- TYPICAL FOR WARD CHARACTERISTICS INST ANT ANEOUS FOR W ARD CURRENT .(A) 0.01 0.1 FOR WARD VOLTAGE. (V) TJ=25 C O PULSE WIDTH=300 S 1% DUTY CYCLE FIG.4-TYPICALREVERSE CHARACTERISTICS INST ANT ANEOUS REVERSE CURRENT .(mA) 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) TJ=125 O C TJ=75 O C TJ=25 O C 0.001 0.01 0.1

100 SS22-SS24

FIG.5-TYPICAL JUNCTION CAPACIT ANCE JUNCTION CAP ACIT ANCE.(pF) 0.1 1 10 100 100 400 REVERSE VOLTAGE. (V) SS29-SS215 SS22-SS24 SS25-SS26 Tj=25 C O f=1.0MHz Vsig=50mVp-p FIG.1- MAXIMUM FORWARD CURRENT DERA TING CURVE 2.0 1.5 1.0 0.5 LEAD TEMPERA TURE. ( C) O RESISTIVE OR INDUCTIVE LOAD SS22-SS24 SS25-SS215 PCB MOUNTED ON 0.2X0.2" (5.0X5.0mm) COPPER PAD AREASAVERAGE FOR W ARD CURRENT .(A) V FIG.6- TYPICAL TRANSIENT THERMAL CHARACTERISTICS TRANSIENT THERMAL IMPEDANCE. (C/W)O 10.01 0.1 10 100 100 0.1 T, PULSE DURATION. (sec) SS22-SS24 SS29-SS210 SS25-SS26 SS215 RATINGS AND CHARACTERISTIC CURVES (SS22 THRU SS215)