SS2020FL-AU PANJIT | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Features

 Low power loss, high efficiency  High surge current capability  AEC-Q101 qualified  Lead free in compliance with EU RoHS 2.0  Green molding compound as per IEC 61249 standard

Applications

 Low voltage rectification  Reverse polarity protection  Low power consumption applications Mechanical Data  Case : SOD-123FL Package  Terminals : Solderable per MIL-STD-750, Method 2026  Approx. Weight : 0.0006 ounces, 0.017 grams Maximum Ratings (TA = 25 o C unless otherwise noted) PARAMETER SYMBOL SS2020FL-AU SS2030FL-AU SS2040FL-AU UNIT Maximum Repetitive Peak Reverse Voltage VRRM 20 30 40 V Maximum Rms Voltage VRMS 14 21 28 V Maximum DC Blocking Voltage VR 20 30 40 V Maximum Average Forward Rectified Current IF(AV) 2 A Peak Forward Surge Current : 8.3ms Single Half Sine- Wave Superimposed On Rated Load IFSM 50 A Typical Junction Capacitance Measured at 1 MHZ And Applied VR = 4 V CJ 100 pF Typical Thermal Resistance (Note 1) (Note 2) RθJA RθJC 200 oC/W Operating Junction Temperature Range TJ -55 to +150 oC Storage Temperature Range TSTG -55 to +150 oC

PSS2020FL-AU ~ SS2040FL-AU Series September 1,2020 SS2020FL-AU_SERIES-REV.09 Page 2 Note : 1. Mounted on a FR4 PCB, single-sided copper, mini pad. 2. Mounted on a FR4 PCB, single-sided copper, with 100cm 2 copper pad area. 3. Short duration pulse test used to minimize self-heating effect.

Electrical Characteristics

PARAMETER SYMBOL TEST CONDITION SS2020FL-AU SS2030FL-AU SS2040FL-AU UNIT Forward Voltage VF IF = 1A IF = 2A TJ =25 oC 0.41 0.5 0.41 0.5 0.41 0.5 V IF = 1A IF = 2A TJ =125 oC 0.32 0.41 0.32 0.41 0.32 0.41 Reverse Current(Note 3) IR VR = 10V VR = 20V VR = 30V VR = 40V TJ=25oC 100 100 100 uA VR = 20V VR = 30V VR = 40V TJ =125 oC 6.5 mA

PSS2020FL-AU ~ SS2040FL-AU Series September 1,2020 SS2020FL-AU_SERIES-REV.09 Page 3 0 25 50 75 100 125 150 175 2.0 1.5 1.0 0.5 O TL, LEAD TEMPERATURE, C IF, F O RW A R D CU R RE NT 0 20 40 60 0.1 REVERSE VOLTAGE,V (V)R RE VE RS E C UR RE NT ,mA SINGLE PHASE HALF WAVE 60Hz RESTSTIVE OR INDUCTIVE LOAD P.C.B MOUNTED ON 0.2x 0.2 (5.0 x5.0m m) COPPER PAD AREAS O TJ 125 C O TJ 75 C O TJ 25 C Rating and Characteristic Curves FIG. 1-FORWARD CURRENT DERATING CURVE FIG. 2-TYPICAL REVERSE CHARACTERISTIC FIG. 4-TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS INSTANT ANEOUS FORW ARD CURRENT,A INSTANTANEOUS FORWARD VOLTAGE (V) 0 .1 1.0 T = 25 C PulseWidth= 300 s 1%Duty Cycle J O m V ,REVERSE VOLTAGE(V)R CAP ACIT AN CE, pF 0 10 20 30 40 1000 100 0.1 O T =25 CJ FIG. 3-TYPICAL JUNCTION CHATACTERISTIC FIG. 5-OPERATING TEMPERATURE DERATING CURVE 100 120 0 25 50 75 100 125 150 TJ, JUNCTION TEMPERATURE (°C) PERCENT OF REVERSE VOLTAGE (%)

PSS2020FL-AU ~ SS2040FL-AU Series September 1,2020 SS2020FL-AU_SERIES-REV.09 Page 4 Part No. Packing Code Version Packaging Information & Mounting Pad Layout SOD-123FL Dimension Unit: inch(mm) SOD-123FL Pad Layout Unit: inch(mm) Part No. Packing Code Package Type Packing Type Marking Version SS2020FL-AU_R1_000A1 SOD-123FL 3K pcs / 7” reel GM Halogen free SS2030FL-AU_R1_000A1 SOD-123FL 3K pcs / 7” reel GN Halogen free SS2040FL-AU_R1_000A1 SOD-123FL 3K pcs / 7” reel GP Halogen free 0.115(2.90) 0.106(2.70) 0.044(1.10) 0.031(0.80) 0.044(1.10) 0.035(0.90) 0.008(0.20) 0.137(3.50) 0.030(0.75) 0.017(0.45) 0.075(1.90) 0.067(1.70) 0.167 (4.25) 0.122 (3.10) 0.045 (1.15) 0.048 (1.22)

PSS2020FL-AU ~ SS2040FL-AU Series September 1,2020 SS2020FL-AU_SERIES-REV.09 Page 5 Disclaimer

  • Reproducing and modifying information of the document is prohibited without permission from Panjit International Inc..
  • Panjit International Inc. reserves the rights to make changes of the content herein the document anytime without notification. Please refer to our website for the latest document.
  • Panjit International Inc. disclaims any and all liability arising out of the application or use of any product including damages incidentally and consequentially occurred.
  • Panjit International Inc. does not assume any and all implied warranties, including warranties of fitness for particular purpose, non- infringement and merchantability.
  • Applications shown on the herein document are examples of standard use and operation. Customers are responsible in comprehending the suitable use in particular applications. Panjit International Inc. makes no representation or warranty that such applications will be suitable for the specified use without further testing or modification.
  • The products shown herein are not designed and authorized for equipments requiring high level of reliability or relating to human life and for any applications concerning life-saving or life-sustaining, such as medical instruments, transportation equipment, aerospace machinery et cetera. Customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Panjit International Inc. for any damages resulting from such improper use or sale.
  • Since Panjit uses lot number as the tracking base, please provide the lot number for tracking when complaining.