SS100 HONEYWELL | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 3
Technical content
Interactive Catalog Replaces Catalog Pages Sensing and Control Honeywell Inc.
11 West Spring Street
Freeport, Illinois 61032 Honeywell Sensing and Control has replaced the PDF product catalog with the new Interactive Catalog. The Interactive Catalog is a power search tool that makes it easier to find product information. It includes more installation, application, and technical information than ever before. Click this icon to try the new Interactive Catalog.
Solid State Sensors SS100 Series Surface Mount Digital Position Sensors 10 Honeywell 1 MICRO SWITCH Sensing and Control1 1-800-537-6945 USA1F 1-815-235-6847 International1 1-800-737-3360 Canada
FEATURES
1 Quad Hall design virtually eliminates
1 Temperature compensated
1 Bipolar, unipolar, latching magnetics
1 Super high sensitivity available
1 Symmetry of operate/release points
about zero gauss (bipolar/latching)
1 Operating temperature range of –40
to F125°C
1 Low current consumption (7 mA
typical @ 5 V, 25°C) 1 3.8 to 30 VDC supply voltage range
1 High output current capability of
The temperature compensated Hall effect sensor consists of a quad Hall sensing element in a square integrated circuit chip, which is then encapsulated in a glass-filled thermoset molding material. The small SOT89 style package surface mounts on PC boards and flexible circuits. The integrated circuit is thermally bal- anced for predictable performance over the full temperature range of –40 to F125°C. Built-in temperature compensa- tion has a negative slope (operate and release points decrease as temperature increases). This slope is optimized to match the negative temperature coeffi- cient of low cost magnets, to track their performance over temperature. Bipolar, unipolar and latching magnetics are available. Band gap regulation provides extremely stable operation over the full supply volt- age range of 3.8 to 30 VDC. Current con- sumption is a low 10 mA maximum. SS100 sensors are capable of continuous 20 mA sinking output, and can withstand temporary current as high as 50 mA abso- lute maximum. They can use existing power supply sources in most applica- tions, and can be directly interfaced with many electronic components without buf- fering or compensation circuitry. SS100 Series sensors are available on tape and reel for high-volume, automated pick and place equipment. Each reel contains 1,000 sensors. NOTE: DO NOT wave solder this prod- uct. This process may negatively affect sensor performance and reliability, and will void MICRO SWITCH’s warranty. MICRO SWITCH recommends a convec- tion infrared reflow process with peak temperatures not to exceed 220 °C (428°F) for 10 seconds maximum. ORDER GUIDE Catalog Listing SS111A SS113A SS141A SS143A SS149A SS161A SS166A Magnetic Type Bipolar Bipolar Unipolar Unipolar Unipolar Latching Latching Supply Current (max.) 10 mA 10 mA 10 mA 10 mA 10 mA 10 mA 10 mA Output Type Sink Sink Sink Sink Sink Sink Sink Output Current (max.) 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA 20 mA Leakage Current (max.) 10 µA 10 µA 10 µA 10 µA 10 µA 10 µA 10 µA Output Switching Time Magnetic Characteristics* G mT G mT G mT G mT G mT G mT G mT *G = Gauss mT = milliTesla. PDFINFO p a g e - 0 1 0
Solid State Sensors SS100 Series Surface Mount Digital Position Sensors Honeywell 1 MICRO SWITCH Sensing and Control1 1-800-537-6945 USA1F 1-815-235-6847 International1 1-800-737-3360 Canada 11 NOTICE Interruption of power to a latching device may cause the output to change state when power is restored. If a magnetic field of sufficient strength is present, the sensor output will be in the condition dictated by the magnetic field. Digital PDFINFO p a g e - 0 1 1