SS12 YEASHIN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
http://www.yeashin.com 1 REV.03 20140513 SS12 THRU SS120 SURFACE MOUNT SCHOTTKY BARRIER RECTIFIER VOLTAGE- 20 to 200 Volts CURRENT- 1.0 Amperes
FEATURES
‧Plastic package has Underwriters Laboratory Flammability Classification 94V-O ‧For surface mounted applications ‧Low profile package ‧Built-in strain relief ‧Metal to silicon rectifier. majority carrier conduction ‧Low power loss,high efficiency ‧High surge capacity ‧High current capacity ,low VF ‧For use in low voltage high frequency inverters, free wheeling, and polarity protection applications. ‧High temperature soldering guaranteed: 260°C /10 seconds at terminals ‧High temperature soldering : 260 O C / 10 seconds at terminals ‧Pb free product at available : 99% Sn above meet RoHS environment substance directive request MECHANICAL DATA ‧Case: JEDEC DO-214AC molded plastic ‧Terminals:Solder plated, solderable per MIL-STD-750, Method 2026 ‧Polarity: Color band denotes positive end (cathode) ‧Standard packaging: 12mm tape (EIA-481) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25°C ambient temperature unless otherwise specified. Resistive or inductive load. SYMBOLS SS12 SS13 SS14 SS15 SS16 SS18 SS19 UNITS Maximum Recurrent Peak Reverse Voltage V RRM 20 30 40 50 60 80 90 100 V Maximum RMS Voltage V RMS 14 21 28 35 42 56 64 71 V Maximum DC Blocking Voltage V DC 20 30 40 50 60 80 90 100 V Maximum Average Forward Rectified Current at TL (See figure 1) I (AV) 1.0 A Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC method) I FSM 30.0 A Maximum Instantaneous Forward Voltage at 1.0A (Note 1) V F 0.50 0.70 0.85 V Maximum DC Reverse Current (Note 1) Ta= 25°C at Rated DC Blocking Voltage Ta=100°C I R 0.5 20.0 mA Maximum Thermal Resistance(Note 2) RθJL RθJA 28.0 88.0 °C/W Operating Temperature Range T J -55 to +150 °C Storage Temperature Range T STG -55 to +150 °C NOTES: 1.Pulse Test with PW =300µsec, 2% Duty Cycle. SMA/DO-214AC Unit:inch(mm) .062(1.60) .047(1.20) .012(.305) .006(.152) .008(.203) .002(.051) .060(1.52) .030(0.76) .181(4.60) .157(4.00) .208(5.28) .188(4.80) .114(2.90) .098(2.50) .096(2.44) .078(2.00) SS110 SS115 150 105 150 SS120 200 140 200 0.87 0.90
http://www.yeashin.com 2 REV.03 20140513 SS12 THRU SS120 DEVICE CHARACTERISTICS INST ANT ANEOUS FORW ARDCURRENT AMPERES Fig.2-TYPICALINST ANT ANEOUSFORWARD CHARACTERISTIC INST ANT ANEOUS FORWARD VOL T AGE,VOL TS A VERAGE FORW ARD CURRENTAMPERES Fig.1-FORWARD CURRENTDERA TING CURVE LEAD TEMPERA TURE, C O 0.1 PEAK FORW ARD SURGE CURRENT AMPERES NUMBEROFCYCLE AT 60Hz 1000 0.1 1.0 10 100 CAP ACIT ANCE, pF Fig.3-TYPICAL JUNCTION CAP ACITANCE REVERSE VOL TAGE,VOL TS 1 10 100 1.0 .50 1.0 .2 .3 .4 .5 100 Fig.4-MAXIMUMNON-REPETITIVE PEAK FORWARD SURGECURRENT SINGLE PHASEHALFWA VE60Hz RESISTIVEORINDUCTIVE LOAD P .C.BMOUNTED ON0.2 X X 0.2" ( 5.0 5.0mm) COPPERP ADAREAS T=2 5 C PulseWidth= 300 s 1%Duty Cycle J O m T=2 5C J O .25 .75 50-60V 80-100V 20-40V 100 15050 200V .6 .7 .8 150V