MBRS260T3G_V01 ONSEMI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
Features
- Compact Package with JïBend Leads Ideal for Automated Handling
- Highly Stable Oxide Passivated Junction
- GuardïRing for OverïV oltage Protection
- Low Forward V oltage Drop
- NRVB Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AECïQ101 Qualified and PPAP Capable*
- These are PbïFree Devices Mechanical Characteristics
- Case: Molded Epoxy
- Epoxy Meets UL 94 Vï0 @ 0.125 in
- Weight: 95 mg (Approximately)
- Cathode Polarity Band
- Lead and Mounting Surface Temperature for Soldering Purposes: 260°C Max. for 10 Seconds
- Finish: All External Surfaces Corrosion Resistant and Terminal Leads are Readily Solderable
- ESD Ratings: ♦ Machine Model = C ♦ Human Body Model = 3B SCHOTTKY BARRIER RECTIFIER
2.0 AMPERES, 60 VOLTS
www.onsemi.com For information on tape and reel specifications, including part orientation and tape sizes, please refer to our T ape and Reel Packaging Specifications Brochure, BRD8011/D. MARKING DIAGRAM (Note: Microdot may be in either location) Device Package Shipping
ORDERING INFORMATION
(PbïFree) 2,500 / Tape & Reel The Assembly Location code (A) is front side optional. In cases where the Assembly Location is stamped in the package bottom (molding ejecter pin), the front side assembly code may be blank. SMB CASE 403A B26 = Specific Device Code A = Assembly Location Y = Year WW = Work Week /C0071 = PbïFree Package AYWW B26/C0071 /C0071 MBRS260T3G NRVBS260T3G* NRVBS260T3GïVF01* NRVBS260NT3G* SRVBS260NT3G*
MBRS260T3G, NRVBS260N, NRVBS260T3G, SRVBS260N www.onsemi.com MAXIMUM RATINGS Rating Symbol Value Unit Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 60 V Average Rectified Forward Current (At Rated VR, TL = 95°C) IO 2.0 A NonïRepetitive Peak Surge Current (Surge Applied at Rated Load Conditions Halfwave, Single Phase, 60 Hz) IFSM A Storage Temperature Range Tstg ï55 to +150 °C Operating Junction Temperature TJ ï55 to +125 °C Voltage Rate of Change (Rated VR, TJ = 25°C) dv/dt 10,000 V//C0109s Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. THERMAL CHARACTERISTICS Characteristic Symbol Value Unit Thermal Resistance, JunctionïtoïLead (Note 1) Thermal Resistance, JunctionïtoïAmbient (Note 2) R/C0113JL R/C0113JA °C/W 1. Mounted with minimum recommended pad size, PC Boa rd FR4. 2. 1 inch square pad size (1 x 0.5 inch for each lea d) on FR4 board.
ELECTRICAL CHARACTERISTICS
Characteristic Symbol Value Unit Maximum Instantaneous Forward Voltage (Note 3) (iF = 1.0 A) (iF = 2.0 A) vF TJ = 25°C TJ = 125°C V 0.51 0.63 0.475 0.55 Maximum Instantaneous Reverse Current (Note 3) (VR = 60 V) IR TJ = 25°C TJ = 125°C mA 0.2 20 Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product performance may not be indicated by the Electrical Characteristics if operated under different conditions. 3. Pulse Test: Pulse Width ≤ 250 /C0109s, Duty Cycle ≤ 2.0%.
Figure 1. Typical Forward Voltage Figure 2. Maximum Forward Voltage Figure 3. Typical Reverse Current Figure 4. Typical Capacitance
10 C, CAPACITANCE (pF)
Figure 5. Current Derating ï Junction to Lead Figure 6. Forward Power Dissipation
CASE 403Aï03 ISSUE J DATE 19 JUL 2012SCALE 1:1 E b D cL1L A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION b SHALL BE MEASURED WITHIN DIMENSION L1. XXXXX = Specific Device Code A = Assembly Location Y = Year WW = Work Week /C0071 = PbïFree Package (Note: Microdot may be in either location) *This information is generic. Please refer to device data sheet for actual part marking. PbïFree indicator, G or microdot /C0071, may or may not be present. AYWW XXXXX/C0071 /C0071 GENERIC MARKING DIAGRAM* 2.261 0.089 2.743 0.108 2.159 0.085 /C0466mm inches /C0467SCALE 8:1 *For additional information on our PbïFree strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. SOLDERING FOOTPRINT* DIM A MIN NOM MAX MIN MILLIMETERS 1.95 2.30 2.47 0.077 INCHES A1 0.05 0.10 0.20 0.002 b 1.96 2.03 2.20 0.077 c 0.15 0.23 0.31 0.006 D 3.30 3.56 3.95 0.130 E 4.06 4.32 4.60 0.160 L 0.76 1.02 1.60 0.030 0.091 0.097 0.004 0.008 0.080 0.087 0.009 0.012 0.140 0.156 0.170 0.181 0.040 0.063 NOM MAX 0.51 REF 0.020 REF D HE SCALE 1:1 AYWW XXXXX/C0071 /C0071 POLARITY INDICATOR OPTIONAL AS NEEDED Polarity Band Non ïPolarity Band Polarity Band Non ïPolarity Band MECHANICAL CASE OUTLINE PACKAGE DIMENSIONS ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC dba ON Semiconductor or its subsidiaries in the United States and/or other countries. ON Semiconductor reserves the right to make changes without further notice to any products herein. ON Semiconductor makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ON Semiconductor assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. ON Semiconductor does not convey any license under its patent rights nor the rights of others. 98ASB42669BDOCUMENT NUMBER: DESCRIPTION: Electronic versions are uncontrolled except when accessed directly from the Document Repository. Printed versions are uncontrolled except when stamped CONTROLLED COPY in red. PAGE 1 OF 1SMB Semiconductor Components Industries, LLC, 2019 www.onsemi.com
onsemi, , and other names, marks, and brands are registe red and/or common law trademarks of Semiconductor Components Industries, LLC dba onsemi or its affiliates and/or subsidiaries in the United States and/or other countries. onsemi owns the rights to a number of patents, trademarks, copyrights, trade secrets, and other intellectual property. A listing of onsemis product/patent coverage may be accessed at www.onsemi.com/site/pdf/PatentïMarking.pdf. onsemi reserves the right to make changes at any time to any products or information herein, without notice. The information herein is provided asïis and onsemi makes no warranty, representation or guarantee regarding the accuracy of the information, product features, availability, functionality, or suitability of its products for any particular purpose, nor does onsemi assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. Buyer is responsible for its products and applications using onsemi products, including compliance with all laws, regulations and safety requirements or standards, regardless of any support or applications information provided by onsemi. Typical parameters which may be provided in onsemi data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including Typicals must be validated for each customer application by customers technical experts. onsemi does not convey any license under any of its intellectual property rights nor the rights of others. onsemi products are not designed, intended, or authorized for use as a critical component in life support systems or any FDA Class 3 medical devices or medical devices with a same or similar classification in a foreign jurisdiction or any devices intended for implantation in the human body. Should Buyer purchase or use onsemi products for any such unintended or unauthorized application, Buyer shall indemnify and hold onsemi and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that onsemi was negligent regarding the design or manufacture of the part. onsemi is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION TECHNICAL SUPPORT North American Technical Support: Voice Mail: 1 800ï282ï9855 Toll Free USA/Canada Phone: 011 421 33 790 2910 LITERATURE FULFILLMENT: Email Requests to: orderlit@onsemi.com onsemi Website: www.onsemi.com Europe, Middle East and Africa Technical Support: Phone: 00421 33 790 2910 For additional information, please contact your local Sales Representative