DATASHEET SEARCH SITE | WWW.ALLDATASHEET.COM

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 7

Technical content

Only One Name Means ProTek’Tion™ www.protekdevices.com05305.R1 2/11 Page 1

05305 SRV05-4LC

uLtRa Low CaPaCitanCe Stee Ring diode/t VS aRRay deSCR iPtion The SRV05-4LC is a high-powered, ultra low capacitance device for dual USB port and power bus protection. The SRV05-4LC is rated for 5.0V applications, with 500 Watts peak pulse power per line (8/20µs) and an ultra low capaci- tance of 0.7pF (CJ(SD)). The SRV05-4LC is ideally suited for surge suppression and ESD protection of high-speed data line applications such as video graphic cards, 3G cellular handsets, gigabit Ethernet and SIMM cards. The SRV05-4LC combines eight ultra low capacitance steering diodes for up to four individual data or transmission lines and one TVS diode for the power bus. This device is offered in the space-saving SOT-23-6 package configuration. The small package size minimizes the lead inductance, preventing overshoot voltages during high ESD current events. ProTek recommends that the SRV05-4LC be mounted near the connector on the PCB. This device meets and exceeds the ESD requirements of IEC 61000-4-2 and the EFT requirements of IEC 61000-4-4.

FeatuReS

  • Compatible with IEC 61000-4-2 (ESD): Air 15kV, Contact 8kV
  • Compatible with IEC 61000-4-4 (EFT): 40A, 5/50ns
  • Compatible with IEC 61000-4-5 (Surge): 24A, 8/20µs - Level 2(Line- Gnd) & Level 3(Line-Line0
  • 500 Watts Peak Pulse Power per Line(tp = 8/20µs)
  • ESD Protection > 25 kilovolts
  • Low Clamping Voltage
  • Protection for 4 Lines
  • Ultra Low Capacitance CJ(SD): 0.7pF Typical
  • RoHS Compliant
  • REACH Compliant meChani CaL ChaRaCteRiStiCS
  • Molded JEDEC SOT-23-6 Package
  • Approximate Weight: 16 milligrams
  • Lead-Free Nickel Paladium Gold Plating
  • Solder Reflow Temperature: Nickel-Paladium-Gold: Ni/Pd/Au, 96/3.5/0.5: 260-270°C
  • Flammability Rating UL 94V-0
  • 8mm Tape and Reel per EIA Standard 481 aPPL iCation S
  • Gigabit Ethernet
  • SMART Phones
  • Portable Electronics
  • Video Card Interfaces
  • USB 2.0 Interfaces
  • DVI Interfaces Pin ConFigu Ration Sot-23-6 PaCkage 1 6 3 4 I/O 1 GND I/O 2 I/O 4 REF I/O 3

Only One Name Means ProTek’Tion™ www.protekdevices.com05305.R1 2/11 Page 2 tyPiCaL deViCe ChaRaCteRiStiCS maXimum Rating S @ 25°C unless otherwise Specified PaRamete R SymBoL VaLue unit S Peak Pulse Power (tp = 8/20µs) - See Figure 1 PPP 500 Watts Operating Temperature TL -55 to 150 °C Storage Temperature TSTG -55 to 150 °C Forward Surge Rating (5ms @ 25°C, IF = 10mA) VF 0.5 Min. - 1.2 Max. Volts eLeCtRiCaL ChaRaCteRiStiCS P eR Line @ 25°C unless otherwise Specified PaRt num BeR deViCe maRking Rated Stand-oFF VoLtage (note 1) Vwm VoLtS minimum BReakdown VoLtage (note 1) @ 1ma V(BR) VoLtS maXimum CLamPing VoLtage (Fig. 2) (note 1) @ iP = 1a VC VoLtS maXimum CLamPing VoLtage (Fig. 2) (note 1) @ iP = 5a VC VoLtS maXimum Leakage CuRRent (note 1) @Vwm id µa tyPiCaL CaPaCitanCe (note 2) @0V, 1mhz CJ(Sd) pF note S 1. Measured from I/O pin to ground. 2. Cj = C(measured)/2.

Only One Name Means ProTek’Tion™ www.protekdevices.com05305.R1 2/11 Page 3 tyPiCaL deViCe ChaRaCteRiStiCS TEST WAVEFORM PARAMETERS t f = 8µs td = 20µs tf e-t Peak Value IPP td = t/(IPP/2) Figu Re 2 PuLSe waVe FoRm t - time - µs 0 5 10 15 20 25 30 iPP - Peak Pulse Current - % of iPP 100 120 Figu Re 1 Peak PuLSe PoweR VS PuLSe time td - Pulse duration - µs 500W, 8/20µs Waveform 0.1 1 10 100 1,000 10,000 PPP - Peak Pulse Power - watts 100 1,000 10,000

Only One Name Means ProTek’Tion™ www.protekdevices.com05305.R1 2/11 Page 4 tyPiCaL deViCe ChaRaCteRiStiCS Peak Pulse Power 8/20µs Average Power Figu Re 3 PoweR deRating CuRVe ta - ambient temperature - °C 0 25 50 75 100 125 150 100 % of Rated Power Figu Re 4 oVeRShoot & CLamPing VoLtage eSd test Pulse - 25 kilovolt, 1/30ns (waveshape)

5 Volts per division

Only One Name Means ProTek’Tion™ www.protekdevices.com05305.R1 2/11 Page 5 Sot-23-6 PaCkage in FoRmation out Line dimen Sion S dim miLLimete RS inCheS min maX min maX A 2.80 3.05 0.110 0.120 B 1.50 1.75 0.059 0.070 C 0.90 1.30 0.036 0.051 D 0.30 0.40 0.012 0.016 E 0.85 1.05 0.033 0.040 G 0.90 1.45 0.036 0.057 J 0.09 0.20 0.003 0.008 K 2.60 3.00 0.102 0.118 L 0.0 0.15 0.0 0.006 M 0.30 0.60 0.012 0.024 note S 1. Controlling dimension: inches. 2. Dimensioning and tolerances per ANSI Y14.5M, 1985. 3. Dimensions are exclusive of mold flash and metal burrs. Pad Layout dimen Sion S dim miLLimete RS inCheS nomina L nomina L A 0.70 0.028 B 1.90 0.074 C 0.95 0.037 D 2.40 0.094 E 1.00 0.039 note S 1. Controlling dimension: inches. D E K 456 321 A G C L B M 0° - 8° J D C B A E

Only One Name Means ProTek’Tion™ www.protekdevices.com05305.R1 2/11 Page 6 Ree L dia. taPe width a0 B0 k0 d e F w P0 P2 P tmax noteS 1. Dimensions are in millimeters. 2. Surface mount product is taped and reeled in accordance with EIA-481. 3. Suffix - T7 = 7” Reel - 3,000 pieces per 8mm tape. 4. Marking on Part - marking code (see page 2) and pin one defined by dot on package. Package outline, pad layout and tape specifications per document number 06013.R5 2/11

oRdeRing inFoRmation

BaSe PaRt num BeR LeadFRee SuFFiX taPe SuFFiX Qty/ReeL ReeL SiZe tuBe Qty SRV05-4LC n/a -T7 3,000 7” n/a Top Cover Tape D

10 Pitches Cumulative

Tolerance on Tape. ± 0.2 P E F W User Direction of Feed Pin 1 t

Only One Name Means ProTek’Tion™ www.protekdevices.com05305.R1 2/11 Page 7 ProTek Devices, based in Tempe, Arizona USA, is a manufacturer of Transient Voltage Suppression (TVS) products designed specifically for the protection of electronic systems from the effects of lightning, Electrostatic Discharge (ESD), Nuclear Electromagnetic Pulse (NEMP), in- ductive switching and EMI/RFI. With over 25 years of engineering and manufacturing experience, ProTek designs TVS devices that provide application specific protection solutions for all electronic equipment/systems. ProTek Devices Analog Products Division, also manufactures analog interface, control, RF and power management products. COPYRIGHT © ProTek Devices 2008 - This literature is subject to all applicable copyright laws and is not for resale in any manner. SPECIFICATIONS: ProTek reserves the right to change the electrical and or mechanical characteristics described herein without notice. DESIGN CHANGES: ProTek reserves the right to discontinue product lines without notice and that the final judgement concerning selection and specifications is the buyer’s and that in furnishing engineering and technical assistance. ProTek assumes no responsibility with respect to the selection or specifications of such products. ProTek makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does ProTek assume any liability arising out of the application or use of any product or circuit and specifically disclaims any and all liability without limitation special, consequential or incidental damages. LIFE SUPPORT POLICY: ProTek Devices products are not authorized for use in life support systems without written consent from the factory. ContaCt uS Corporate headquarters

2929 South Fair Lane

Tempe, Arizona 85282 USA By telephone General: 602-431-8101 Sales: 602-414-5109 Customer Service: 602-414-5114 By Fax General: 602-431-2288 By e-mail: Sales: sales@protekdevices.com Customer Service: service@protekdevices.com Technical Support: support@protekdevices.com web www.protekdevices.com www.protekanalog.com