SRR4

SRR0 EIC | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 2

Technical content

PRV : 50 - 600 Volts Io : 3.0 Amperes FEATURES : * High current capability * High surge current capability * High reliability * Low reverse current * Low forward voltage drop * Fast switching for high efficiency MECHANICAL DATA : * Case : SMC Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Lead Formed for Surface Mount * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.21 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. SYMBOL SRR0 SRR1 SRR2 SRR4 SRR6 UNIT Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 V Maximum RMS Voltage VRMS 35 70 140 280 420 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 V Maximum Average Forward Current Ta = 90 °C IF(AV) 3.0 A Maximum Peak Forward Surge Current, 8.3ms Single half sine wave superimposed on rated load (JEDEC Method) Maximum Peak Forward Voltage at I F = 3.0 A VF 1.25 V Maximum DC Reverse Current Ta = 25 °C IR 10 µA at Rated DC Blocking Voltage Ta = 100 °C IR(H) 150 µA Maximum Reverse Recovery Time ( Note 1 ) Trr 150 ns Typical Junction Capacitance ( Note 2 ) CJ 28 pf Junction Temperature Range TJ - 65 to + 150 °C Storage Temperature Range TSTG - 65 to + 150 °C Notes : ( 1 ) Reverse Recovery Test Conditions : IF = 0.5 A, IR = 1.0 A, Irr = 0.25 A. ( 2 ) Measured at 1.0 MHz and applied reverse voltage of 4.0 VDC Page 1 of 2 Rev. 01 : April 2, 2002 RATING IFSM 100 A SMC (DO-214AB) Dimensions in inches and (millimeter) 0.305(7.75) 0.320(8.13) 0.245(6.22) 0.121(3.07) 0.115(2.92) 0.220(5.59) 0.012(0.305) 0.103(2.62) 0.280(7.11) 0.060(1.52) 0.260(6.60) 0.079(2.00) 0.006(0.152) 0.030(0.76) 0.008(0.203) 0.004(0.102)

RATING AND CHARACTERISTIC CURVES ( SRR0 - SRR6 ) FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM NOTES : 1. Rise Time = 7 ns max., Input Impedance = 1 megaohm, 22 pF. 2. Rise time = 10 ns max., Source Impedance = 50 ohms. 3. All Resistors = Non-inductive Types. FIG.2 - DERATING CURVE FOR OUTPUT FIG.3 - MAXIMUM NON-REPETITIVE PEAK RECTIFIED CURRENT FORWARD SURGE CURRENT 0 25 50 75 100 125 150 175 1 2 4 6 10 20 40 60 100 AMBIENT TEMPERATURE, ( °C) NUMBER OF CYCLES AT 60Hz FIG.4 - TYPICAL FORWARD CHARACTERISTICS FIG.5 - TYPICAL REVERSE CHARACTERISTICS FORWARD VOLTAGE, VOLTS Page 2 of 2 Rev. 01 : April 2, 2002 60Hz RESISTIVE OR INDUCTIVE LOAD 2.4 1.8 1.2 0.6 3.0 100 10 1.0 100 0.1 0.01 0.01 1.0 0.1 100 1400 20 40 60 120 PERCENT OF RATED REVERSE VOLTAGE, (%) PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD OUTPUT CURRENT, AMPERES FORWARD CURRENT, AMPERES REVERSE CURRENT, MICROAMPERES TJ = 25 °C TJ = 100 °C TJ = 25 °C Pulse Width = 300 µs 2% Duty Cycle 8.3 ms SINGLE HALF SINE WAVE Ta = 50 °C SET TIME BASE FOR 50 ns/cm Trr + 0.5 A - 0.25 A - 1.0 A 1 cm

50 Vdc

(approx) OSCILLOSCOPE ( NOTE 1 ) 1 Ω 50 Ω 10 Ω D.U.T. PULSE GENERATOR ( NOTE 2 )