SRP5030HMT-8R2M

SRP5030HMT BOURNS | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 4

Technical content

Features

n Shielded construction – low radiation n Low buzz noise n Hot press molding process n High current n Low DCR n RoHS compliant*

Applications

Click these links for more information: PRODUCT SELECTOR TECHNICAL LIBRARY INVENTORY SAMPLES CONTACT General Specifications Operating Temperature -40 °C to +125 °C Storage Temperature -40 °C to +125 °C Temperature Rise 40 °C at rated Irms Moisture Sensitivity Level 1 ESD Classification (HBM)N/A Materials Core Metal alloy powder Wire Enameled copper Terminal Finish Cu/Ni/Sn Packaging 2,000 pcs per 13-inch reel Electrical Specifications @ 25 °C Bourns Part Number Inductance @ 100 KHz / 1 V Q 100 kHz SRF (MHz) DCR (mW) Irms (A) Isat (A) SRP5030HMT-R47M 047 ±20 20 76 31 37 18 14 SRP5030HMT-R68M 068 65 37 43 15 115 SRP5030HMT-1R0M 10 52 56 67 14 11 SRP5030HMT-1R5M 15 38 83 10 13 105 SRP5030HMT-2R2M 22 29 12 144 105 85 SRP5030HMT-3R3M 33 24 16 192 85 75 SRP5030HMT-4R7M 47 19 26 312 7 65 SRP5030HMT-5R6M 56 18 33 396 65 61 SRP5030HMT-6R8M 68 17 36 432 63 59 SRP5030HMT-8R2M 82 14 46 552 58 55 SRP5030HMT-100M 10 13 58 696 52 5 SRP5030HMT-150M 15 11 90 108 41 26 SRP5030HMT-220M 22 9 111 1332 36 22 Product Dimensions 5.2 ± 0.2 (.205 ± .008) 2.8 ± 0.2 (.110 ± .008) 1.3 ± 0.3 (.051 ± .012) 2 PLCS. 3.0 ± 0.3 (.118 ± .012) 5.1 ± 0.3 (.201 ± .012) 5.6 ± 0.3 (.220 ± .012) 1.7 ± 0.3 (.067 ± .012) DIMENSIONS: MM (INCHES) DIMENSIONS: MM (INCHES) Recommended Layout 3.5 (.138) 2.2 (.087) 6.5 (.256) How to Order SRP5030HMT - R47 M Model Value Code (see table) Tolerance M = ±20 % Electrical Schematic *RoHS Directive 2015/863, Mar 31, 2015 and Annex. Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf. WARNING Cancer and Reproductive Harm www.P65Warnings.ca.gov

SRP5030HMT Series – Shielded Power Inductors L vs. I Charts 0.70 0.56 0.42 0.28 0.14 Inductance (μH) 1.00 0.80 0.60 0.40 0.20 Inductance (μH) DC Current (A) DC Current (A) Temperature Rise (°C) 100 Temperature Rise (°C) 100 SRP5030HMT-R47M 2.00 1.60 1.20 0.80 0.40 Inductance (μH) DC Current (A) Temperature Rise (°C) 100 SRP5030HMT-1R5M 3.00 2.40 1.80 1.20 0.60 Inductance (μH) DC Current (A) Temperature Rise (°C) 100 SRP5030HMT-2R2M 4.50 3.60 2.70 1.80 0.90 Inductance (μH) DC Current (A) Temperature Rise (°C) 100 SRP5030HMT-3R3M 7.00 5.60 4.20 2.80 1.40 Inductance (μH) DC Current (A) Temperature Rise (°C) 100 SRP5030HMT-4R7M 7.00 5.60 4.20 2.80 1.40 Inductance (μH) DC Current (A) Temperature Rise (°C) 100 SRP5030HMT-5R6M 10.00 8.00 6.00 4.00 2.00 Inductance (μH) DC Current (A) Temperature Rise (°C) 100 SRP5030HMT-6R8M 12.00 9.60 7.20 4.80 2.40 Inductance (μH) DC Current (A) Temperature Rise (°C) 100 SRP5030HMT-8R2M 30.00 24.00 18.00 12.00 6.00 Inductance (μH) DC Current (A) Temperature Rise (°C) 100 SRP5030HMT-200M 14.00 11.20 8.40 5.60 2.80 Inductance (μH) DC Current (A) Temperature Rise (°C) 100 SRP5030HMT-100M 20.00 16.00 12.00 8.00 4.00 Inductance (μH) DC Current (A) Temperature Rise (°C) 100 SRP5030HMT-150M SRP5030HMT-R68M 1.50 1.20 0.90 0.60 0.30 Inductance (μH) DC Current (A) Temperature Rise (°C) 100 SRP5030HMT-1R0M Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

SRP5030HMT Series – Shielded Power Inductors Soldering Profile T p T smax Time 25 °C to Peak Time Temperature T L T c -5 °C t p t L MAX. RAMP UP RATE = 3 °C/SEC. MAX. RAMP DOWN RATE = 6 °C/SEC. PREHEAT AREA T smin t s REFLOW TIMES: 3 TIMES MAX. Profile Feature Pb Free Assembly Preheat - Temperature Min (Tsmin) - Temperature Max (Tsmax) - Time(ts) from Tsmin to Tsmax 150 °C 200 °C 60-120 seconds Ramp-up Rate (TL to Tp) 3 °C/second max Liquidous temperature (TL) Time (tL) maintained above TL 217 °C 60-150 seconds Peak package body temperature (Tp) 250 °C Time (tp) at Tc - 5 °C (Tp should be equal to or less than Tc) < 30 seconds Ramp-Down Rate (Tp to TL) 6 °C/second max Time 25 °C to Peak Temperature 8 minutes max Packaging Specifications 330 (12.992) 13.5 +0.5/-0.2 (.531 +.020/-.008) 5.5 ± 0.1 (.217 ± .004) 12.0 ± 0.3 (.472 ± .012) 8.0 ± 0.1 (.315 ± .004) 4.0 ± 0.1 (.157 ± .004) 1.5 ± 0.1 (.014 ± .002) 6.5 ± 0.1 (.256 ± .004) 5.7 ± 0.1 (.224 ± .004) 12.4 +2/-0 (.488 +.079/-0) 100 ± 2 (3.937 ± .079) COVER TAPE EMBOSSED CARRIER 200 (7.874) MIN. LEADER NO COMPONENT COMPONENTS 400 (15.75) MIN. TRAILER NO COMPONENT USER DIRECTION OF FEED QTY: 2,000 PCS PER REEL DIMENSIONS: MM (INCHES) 3.3 ± 0.1 (.130 ± .004) REV 05/25 Specifications are subject to change without notice. Users should verify actual device performance in their specific applications. The products described herein and this document are subject to specific legal disclaimers as set forth on the last page of this document, and at www.bourns.com/docs/legal/disclaimer.pdf.

This legal disclaimer applies to purchasers and users of Bourns® products manufactured by or on behalf of Bourns, Inc. and its affiliates (collectively, “Bourns”). Unless otherwise expressly indicated in writing, Bourns® products and data sheets relating thereto are subject to change without notice. Users should check for and obtain the latest relevant information and verify that such information is current and complete before placing orders for Bourns® products. The characteristics and parameters of a Bourns® product set forth in its data sheet are based on laboratory conditions, and statements regarding the suitability of products for certain types of applications are based on Bourns’ knowledge of typical requirements in generic applications. The characteristics and parameters of a Bourns® product in a user application may vary from the data sheet characteristics and parameters due to (i) the combination of the Bourns® product with other components in the user’s application, or (ii) the environment of the user application itself. The characteristics and parameters of a Bourns® product also can and do vary in different applications and actual performance may vary over time. Users should always verify the actual performance of the Bourns® product in their specific devices and applications, and make their own independent judgments regarding the amount of additional test margin to design into their device or application to compensate for differences between laboratory and real world conditions. Unless Bourns has explicitly designated an individual Bourns® product as meeting the requirements of a particular industry standard (e.g., IATF 16949) or a particular qualification (e.g., UL listed or recognized), Bourns is not responsible for any failure of an individual Bourns® product to meet the requirements of such industry standard or particular qualification. Users of Bourns® products are responsible for ensuring compliance with safety-related requirements and standards applicable to their devices or applications. Bourns® products are not recommended, authorized or intended for use in nuclear, lifesaving, life-critical or life-sustaining ap- plications, nor in any other applications where failure or malfunction may result in personal injury, death, or severe property or environmental damage. Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any Bourns® products in such unauthorized applications might not be safe and thus is at the user’s sole risk. Life-critical applications include devices identified by the U.S. Food and Drug Administration as Class III devices and generally equivalent classifications outside of the United States. Bourns expressly identifies those Bourns® standard products that are suitable for use in automotive applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard products in an automotive application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. If Bourns expressly identifies a sub-category of automotive application in the data sheet for its standard products (such as infotainment or lighting), such identification means that Bourns has reviewed its standard product and has determined that if such Bourns® standard product is considered for potential use in automotive applications, it should only be used in such sub-category of automotive applications. Any reference to Bourns® standard product in the data sheet as compliant with the AEC-Q standard or “automotive grade” does not by itself mean that Bourns has approved such product for use in an automotive application. Bourns® standard products are not tested to comply with United States Federal Aviation Administration standards generally or any other generally equivalent governmental organization standard applicable to products designed or manufactured for use in aircraft or space applications. Bourns expressly identifi es Bourns® standard products that are suitable for use in aircraft or space applications on such products’ data sheets in the section entitled “Applications.” Unless expressly and specifically approved in writing by two authorized Bourns representatives on a case-by-case basis, use of any other Bourns® standard product in an aircraft or space application might not be safe and thus is not recommended, authorized or intended and is at the user’s sole risk. The use and level of testing applicable to Bourns® custom products shall be negotiated on a case-by-case basis by Bourns and the user for which such Bourns® custom products are specially designed. Absent a written agreement between Bourns and the user regarding the use and level of such testing, the above provisions applicable to Bourns® standard products shall also apply to such Bourns® custom products. Users shall not sell, transfer, export or re-export any Bourns® products or technology for use in activities which involve the design, development, production, use or stockpiling of nuclear, chemical or biological weapons or missiles, nor shall they use Bourns® products or technology in any facility which engages in activities relating to such devices. The foregoing restrictions apply to all uses and applications that violate national or international prohibitions, including embargos or international regulations. Further, Bourns® products and Bourns technology and technical data may not under any circumstance be exported or re-exported to countries subject to international sanctions or embargoes. Bourns® products may not, without prior authorization from Bourns and/or the U.S. Government, be resold, transferred, or re-exported to any party not eligible to receive U.S. commodities, software, and technical data. To the maximum extent permitted by applicable law, Bourns disclaims (i) any and all liability for special, punitive, consequential, incidental or indirect damages or lost revenues or lost profits, and (ii) any and all implied warranties, including implied warranties of fitness for particular purpose, non-infringement and merchantability. For your convenience, copies of this Legal Disclaimer Notice with German, Spanish, Japanese, Traditional Chinese and Simplified Chinese bilingual versions are available at: Web Page: http://www.bourns.com/legal/disclaimers-terms-and-policies PDF: http://www.bourns.com/docs/Legal/disclaimer.pdf C1753 12/14/23R