SRL10100 SECOS | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Voltage 100V 10.0 Amp Low VF Trench Barrier Schottky Rectifier 06-Sep-2017 Rev. A Page 1 of 2 http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. RoHS Compliant Product A suffix of “-C” specifies halogen free
FEATURES
/circle6 Guardring for overvoltage protection /circle6 Very small conduction losses /circle6 Low forward voltage drop /circle6 Component in accordance to RoHS 2002/95/EC MECHANICAL DATA /circle6 Case: Molded plastic /circle6 Epoxy: UL94V-0 rate flame retardant /circle6 Lead: Axial leads, solderable per MIL-STD-202, method 208 guaranteed /circle6 Polarity: Color band denotes cathode end /circle6 Mounting position: Any /circle6 Weight: 1.071 g (Approximate) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS (TA=25°C unless otherwise noted) Parameter Symbol Rating Unit Maximum Recurrent Peak Reverse Voltage V RRM 100 V Maximum RMS Voltage VRMS 70 V Maximum DC Blocking Voltage V DC 100 V Maximum Average Forward Rectified Current I F 10 A Peak Forward Surge Current, 8.3 ms single half sine-wave Superimposed on rated load (JEDEC method) IFSM 100 A Typical Thermal Resistance 1 RθJL 12 °C /W Operating and Storage Temperature Range T J,TSTG -55~150 °C
ELECTRICAL CHARACTERISTICS
Parameter Symbol Typ. Max. Unit Test Condition 0.44 - I F=2A, T A=25°C Maximum Instantaneous Forward Voltage VF - 0.67 V IF=10A, T A=25°C - 0.2 T A=25°C Maximum DC Reverse Current at Rated DC Blocking Voltage I R - 20 mA TA=100°C Typical Junction Capacitance 2 C J 545 - pF Notes: 1. The testing condition of the thermal resistance (junction to lead) is based on 0mm lead between two 10cm x 10cm x 1mm copper pad. 2. Measured at 1.0MHZ and applied reverse voltage of 4.0V DC. DO-27(DO-201) Millimeter REF. Min. Max. A 25.4 (TYP) B 7.20 9.53 C 4.80 5.60 D 1.10 1.32
Voltage 100V 10.0 Amp Low VF Trench Barrier Schottky Rectifier 06-Sep-2017 Rev. A Page 2 of 2 http://www.SeCoSGmbH.com/ Any changes of specification will not be informed individually. RATINGS AND CHARACTERISTIC CURVES