SRDC200R MPSIND | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

VDC VDC % Typ. mA Typ. SRDC201R 5 50 SRDC202R 12 54 SRDC203R 15 57 SRDC204R ±12 53 SRDC205R ±15 51 SRDC206R 5 50 SRDC207R 12 56 SRDC208R 15 62 SRDC209R ±12 59 SRDC210R ±15 59 SRDC211R 5 51 SRDC212R 12 61 SRDC213R 15 61 SRDC214R ±12 61 SRDC215R ±15 61 SRDC216R 5 50 SRDC217R 12 59 SRDC218R 15 59 SRDC219R ±12 51 SRDC220R ±15 51 Pin Sin gles Duals 1 +Vin +Vin

2 NC -Vout

3 NC Common

22 NC Common

23 NC -Vout

12.1g (0.43Oz) Tolerance Millimeters Inches X.X±0.25 X.XX±0.01 X.XX±0.13 X.XXX±0.005 Pin ±0.05 ±0.002 2463 208th Street, Ste. 205 http://www.mpsind.com Torrance, CA 90501 E-mail: sales@mpsind.com 2W, Low Cost DIP, Single & Dual Output DC/DC Converters Case Material – 400 mA MPS Industries SRDC200R Model 2W DC/DC's are specially designed to provide 40mA output ripple, continuous short circuit in a low- profile 24-pin DIP package. The series consists of 20 models with input voltages of 5V, 12V, 24V and 48VDC which offers regulated output voltages of 5V, 12V, 15V, ±12V and ±15VDC. The -25°C to +71°C operating temperature range makes it ideal for data communication equipment, mobile battery driven equipment, distributed power systems, telecommunication equipment, mixed analog/digital subsystems, automatic test instrumentation, and industrial robot systems. Case Size – Pin Connections ±83 133 ±66 Tel: (310) 533-1455 Fax: (310) 533-1853 Non-Conductive Black Plastic Mechanical Dimensions Weight – ±83 ±66 400 165 (4.5 – 5.5) 400 165 165 165 133 ±83 ±66 133 400 Selection Guide Model Number Input Voltage Output Voltage Efficiency Reflected Ripple Current Output Current NC: No Connection Key Features

  • Low Cost
  • 500VDC Isolation
  • MTBF > 800,000 Hours
  • 40mV P-P Ripple and Noise
  • Input 5, 12, 24 and 48VDC
  • Output 5, 12, 15, ±12 and ±15VDC
  • Temperature Performance -25°C to +71°C
  • Short Circuit Protection
  • UL 94V-0 Package Material
  • Internal SMD Construction (10.8 – 13.2) (21.6 – 26.4) (43.2 – 52.8) 133 ±83 ±66 31.8 [1.25] 10.2 [0.40] 20.3 [0.80] 2.0 [0.08] Bottom 3.8 [0.15] Side 1 23 1 1 10 12 15 14 132324 22 0.50 [0.020] 2.54 [0.100] 15.22 [0.600] 2.5 [0.10]

5VDC Input Models -0.7 7.5 VDC Isolation Voltage 500 --- --- VDC 12VDC Input Models -0.7 15 VDC Isolation Resistance 1000 --- --- M Ω 24VDC Input Models -0.7 30 VDC Isolation Capacitance --- 100 150 pF 48VDC Input Models -0.7 55 VDC Switching Frequency 40 80 --- kHz --- 260 °C --- 3000 mW Operating Temperature Ambient -25 71 °C Line Regulation --- ±0.2 ±0.5 % Operating Temperature Case -25 90 °C Load Regulation --- ±0.2 ±0.5 % Storage Temperature -40 125 °C Ripple & Noise --- 40 50 mV P-P Humidity --- 95 % Short Circuit Cooling Units uF 2463 208th Street, Ste. 205 http://www.mpsind.com Torrance, CA 90501 E-mail: sales@mpsind.com Tel: (310) 533-1455 Fax: (310) 533-1853 Derating Curve (Other Outputs) Models by Output Voltage (Each Output on Duals) Notes: 1. Specifications typical at Ta=+25°C, resistive load, nominal input voltage, rated output current unless otherwise noted. 2. Transient recovery time is measured to within 1% error band for a load step change of 50% to 100%. 3. All DC/DC converters should be externally fused at the front end for protection. 4. Other input and output voltage may be available, please contact factory. 5. All specifications subject to change without notice. 6. For detailed data sheet, please contact us directly. Singles --- MHrs Environmental Characteristics Free-Air Convection Output Characteristics Continuous 20MHz BW Exceeding the unit absolute maximum ratings could cause damage. These are not continuous operating ratings. --- General Characteristics Lead Temperature (1.5mm from case for 10sec.) 2W, Low Cost DIP, Single & Dual Output DC/DC Converters Absolute Maximum Ratings Parameter Conditions 100kHz, 1V

60 Seconds

@25°C Ground Benign Conditions Vin = Min. to Max. Io = 10% to 100% Internal Power Dissipation Input Surge Voltage (1000mS) Duals 470 220 Derating Curve (5V Output) 500VDC MTBF 0.8 Maximum Capacitive Load ]Ambient Temperature Output Power (%) 100 -40 50 60 80 100 110 9070 400LFM 200LFM100LFM Natural convection ]Ambient Temperature Output Power (%) 100 -40 50 60 80 100 110 9070 400LFM 200LFM100LFM Natural convection