SRBC-16F2AX | DigiCamel IC Datasheet

Online Datasheet

Read SRBC-16F2AX online.

SRBC-16F2AX BEL | Alldatasheet

Document overview

Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
PDF pages: 7

Technical content

Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 2.4 V-5.5 V Input 0.75 V-3.63 V/16 A Output

Non-Isolated • Under-voltage Lockout (UVLO)
High Efficiency • Over Temperature Protection
High Power Density • Wide Input Range
Fixed Frequency (300 kHz) • Wide Trim Range
OCP/SCP • Remote Sense
Flexible Output Voltage Sequencing
Converter can sink and source current
Remote On/Off • Active Low/High (option)

Description

The Bel SRBC-16F2Ax modules are a series of non-isolated dc/dc converters that deliver up to 16 A of output current with full load efficiency of 94% at 3.3 V output. These modules provide precisely regulated voltage modules have a sequencing feature that enables designers to implement various types of output voltage sequencing when powering multiple voltages on a board. The open-frame construction and small footprint enable designers to develop cost and space-efficient solutions. Standard features include remote On/Off, remote sense, over current protection, short current protection, wide input, and programmable output voltage. Part Selection Output Voltage Input Voltage Max. Output Current Max. Output Power Typical Efficiency Model Number Active Low Model Number Active High Model Number Active Low Notes: 1. These modules use a buck topology, so the output voltages must be 0.8 V less than the input voltage. 2. “W” indicates special coating. 3. Add “G” to the end of the Model Number to indicate Tray Packaging. Absolute Maximum Ratings Parameter Min Typ Max Notes Input Voltage (continuous) -0.3 V - 5.8 V Output Enable Terminal Voltage -0.3 V - 5.8 V Sequencing Voltage 1 -0.3 V - Vin Ambient Temperature -40 °C - 85 °C Storage Temperature -55 °C - 125 °C Notes: All specifications are typical at 25 °C unless otherwise stated. 1. SRBC-16F2Ax series of modules include a sequencing feature that enables users to implement various types of output voltage sequencing in their applications. This is accomplished via an additional sequencing pin. When the sequencing feature is not used, tie the SEQ pin to Vin. SRBC-16F2Ax Series RoHS Compliant

Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 2.4 V-5.5 V Input 0.75 V-3.63 V/16 A Output Input Specifications Parameter Min Typ Max Notes Input Voltage 2.4 V - 5.5 V Vo, set ≤ Vin-0.8 V Input Current (full load) Vo=3.3V Vo=2.5V Vo=1.8V Vo=1.5V Vo=1.2V Vo=0.75V 11.23 A 8.70 A 6.40 A 5.45 A 4.52 A 3.05 A 15.10 A 14.81 A 13.64 A 11.76 A 9.64 A 6.69 A Input Current (no load) - 80 mA - Remote Off Input Current - 10 mA 22 mA Input Reflected Ripple Current (pk-pk) - 100 mA - Input Reflected Ripple Current (rms) - 40 mA - Tested with two 100uF/10V tantalum input capacitors (P/N: TPSC107K010R0075 AVX) & simulated source impedance of 1 uH, 5 Hz to 20 MHz. I2t Inrush Current Transient - 0.15 A 2s0 . 3 A 2s Turn-on Voltage Threshold - 2.2 V - Turn-off Voltage Threshold - 2.0 V - Output Specifications Parameter Min Typ Max Notes Output Voltage Set Point -2% Vo,set - 2% Vo,set Vin=5 V, lo=lomax full load Output Voltage Set Point -3% Vo,set - 3% Vo,set Over all operating input voltages, resistive loads and temperature conditions Load Regulation - 0.4% Vo,set - Io=Io, min to Io, max Line Regulation - 0.3% Vo,set - Vin=Vin, min to Vin, max Regulation Over Temperature (-40 °C to +85 °C) - 0.5% Vo,set - Tref=Ta, min to Ta, max Output Current 0 A - 16 A Current Limit Threshold 19 A - 35 A Short Circuit Surge Transient - 1.6A 2s 2 A 2s Ripple and Noise (pk-pk) - 25 mV 50 mV Ripple and Noise (rms) - 8 mV 15 mV Tested with 0-20 MHz, 10 uF /

16 V tantalum capacitor & 1 uF

/10 V TDK ceramic capacitor at the output Turn on Time - 4 mS 8 mS Overshoot at Turn on - 0% Vo,set 3% Vo,set Output Capacitance ESR ≥ 1 mohm ESR ≥ 10 mohm 0 uF 0 uF 1000 uF 5000 uF

Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 2.4 V-5.5 V Input 0.75 V-3.63 V/16 A Output Output Specifications (continued) Parameter Min Typ Max Notes Transient Response 50% ~ 100% Max Load - 300 mV - Settling Time - 50 uS - 100% ~ 50% Max Load - 300 mV - Settling Time All - 50 uS - di/dt=2.5 A/uS; Vin=5 V; and with 10 uF/16 V tantalum capacitor & 1 uF/10 V ceramic capacitor at the output 50% ~ 100% Max Load - 150 mV - Settling Time - 100 uS - 100% ~ 50% Max Load - 150 mV - Settling Time All - 100 uS - di/dt=2.5 A/us, Vin=5 V; and with two 150 uF/10 V tantalum capacitors & 1 uF/10 V ceramic capacitor at the output Note: All specifications are typical at nominal input (Vin=5 V), full load at 25 °C unless otherwise stated. General Specifications Parameter Min Typ Max Notes Efficiency Vo=3.3 V Vo=2.5 V Vo=1.8 V Vo=1.5 V Vo=1.2 V Vo=0.75 V 92% 90% 88% 85% 82% 76% 94% 92% 90% 88% 85% 79% Measured at Vin=5 V, full load Switching Frequency 250 kHz 300 kHz 350 kHz Over Temperature Shutdown - 125 °C - Output Trim Range (Wide Trim) 0.7525 V - 3.63 V Remote Sense Compensation - - 5% MTBF 5,438,000 hours Calculated Per Bell Core SR-332 (IO = Nominal; Ta = 25 °C) Dimensions Inches (L × W × H) Millimeters (L × W × H) 1.30 x 0.53 x 0.315 33.02 x 13.46 x 8.00 Weight - 6.6 g - Note: All specifications are typical at 25 °C unless otherwise stated. Control Specifications Parameter Min Typ Max Notes Remote On/Off Signal Low (Unit Off) -0.3 V - 0.3 V Signal High (Unit On) 1.5 V - 5.8 V SRBC-16F2A0; Remote On/Off pin open, Unit on. Signal Low (Unit On) -0.3 V - 0.3 V Signal High (Unit Off) 1.5 V - 5.8 V SRBC-16F2AL & SRBC-16F2AW; Remote On/Off pin open, Unit on. Sequencing Voltage 0.05V - Vin Sequencing Voltage should be higher than output voltage. Sequencing Slew Rate Capability - - 2 V/mS Sequencing Delay Time 10 mS - - Delay from Vin, min to application of voltage on SEQ pin Tracking Accuracy Power-Up Power-Down 100 mV 200 mV 200 mV 400 mV

Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 2.4 V-5.5 V Input 0.75 V-3.63 V/16 A Output Output Trim Equations Equation for calculating the trim resistor (in k Ω) given the desired adjusted voltage (Vadj) is shown below. The Trim Up resistor should be connected between the Trim pin and Ground. 11.57525.0 07.21 −−= adj trim VR Equation for calculating the trim voltage (in V) given the desired adjusted voltage (Vadj) is shown below. The Trim Up voltage should be connected between the Trim pin and Ground. )7525.0(1698.07.0 −×−= adjtrim VV RtrimModule Vout GND Trim Vtrim Module Vout GND Trim

Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 2.4 V-5.5 V Input 0.75 V-3.63 V/16 A Output Efficiency Data Vo=3.3 V Vo=2.5 V Vo=1.8 V Vo=1.5 V Vo=1.2 V Vo=0.7525 V 80.0% 82.0% 84.0% 86.0% 88.0% 90.0% 92.0% 94.0% 96.0% 98.0% 123456789 1 0 1 1 1 2 1 3 1 4 1 5 1 6 4.5V 5.5V 70.0% 75.0% 80.0% 85.0% 90.0% 95.0% 100.0% 123456789 1 0 1 1 1 2 1 3 1 4 1 5 1 6 3.0V 3.3V 5.5V 60.0% 65.0% 70.0% 75.0% 80.0% 85.0% 90.0% 95.0% 123456789 1 0 1 1 1 2 1 3 1 4 1 5 1 6 3.3 5.5V 60.0% 65.0% 70.0% 75.0% 80.0% 85.0% 90.0% 95.0% 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 3V 3.3V 5.5V 50.0% 55.0% 60.0% 65.0% 70.0% 75.0% 80.0% 85.0% 90.0% 95.0% 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 3.3V 5.5 45.0% 50.0% 55.0% 60.0% 65.0% 70.0% 75.0% 80.0% 85.0% 90.0% 123456789 1 0 1 1 1 2 1 3 1 4 1 5 1 6 3.3V 5.5V

Bel Fuse Inc. 206 Van Vorst Street, Jersey City, NJ 07302 • Tel 201-432-0463 • Fax 201-432-9542 • www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 2.4 V-5.5 V Input 0.75 V-3.63 V/16 A Output Thermal Derating Curves Vin=3.3 V, Vo=0.7525 V or 1.2 V

206 Van Vorst Street 8F/ 8 Luk Hop Street Preston Technology Management Centre

Jersey City, NJ 07302 San Po Kong Marsh Lane, Suite G7, Preston Tel 201-432-0463 Kowloon, Hong Kong Lancashire, PR1 8UD, U.K. Fax 201-432-9542 Tel 852-2328-5515 Tel 44-1772-556601 www.belfuse.com Fax 852-2352-3706 Fax 44-1772-888366 www.belfuse.com www.belfuse.com NON-ISOLATED DC/DC CONVERTERS 2.4 V-5.5 V Input 0.75 V-3.63 V/16 A Output Mechanical Outline RoHS Compliance Complies with the European Directive 2002/95/EC, calling for the elimination of lead and other hazardous substances from electronic products. Pin Connections Pin Function

1 Remote On/Off

2 Vin

3 SEQ

4 Ground

5 Vout

6 Trim

7 Remote Sense

PAD SIZE: BOTTOM VIEW

Product Information

SRBC-16F2AX specifications and overview.

Summary

NON-ISOLATED DC/DC CONVERTERS 2.4 V-5.5 V Input 0.75 V-3.63 V/16 A Output

Description

NON-ISOLATED DC/DC CONVERTERS 2.4 V-5.5 V Input 0.75 V-3.63 V/16 A Output

Source title SRBC-16F2AX Datasheet(PDF) - Bel Fuse Inc.

Related Parts

More parts from the same family.

Browse manufacturer