SR1660C

SR1620C RECTRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 3

Technical content

SCHOTTKY BARRIER RECTIFIER VOLTAGE RANGE 20 to 200 Volts CURRENT 16.0 Ampere MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25 o C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20%. SR16200C THRU SR1620C TO-220 Dimensions in inches and (millimeters) .108 .051 .374 (9.5) (2.75) (1.3) .148 (3.8 ) .053 (1.3) .047 (1.2) .270 (6.9) .610 (15.5) .583 (14.8) .102 (2.6) .091 (2.3) .583 (14.8) .157 .126 (4.0) (3.2) .531 (13.5) .028 (0.7) .012 (0.3) .230 (5.8) .187 (4.7 ) .146 (3.7) .035 (0.9) .028 (0.7) PIN 1 2 3 PIN 1 PIN 3 HEATSINK PIN 2

FEATURES

• Low switching noise * Low forward voltage drop * Low thermal resistance * High current capability * High switching capability * High surge capabitity * High reliability MECHANICAL DATA * Case: To-220 molded plastic * Epoxy: Device has UL flammability classification 94V-O * Lead: MIL-STD-202E method 208C guaranteed * Mounting position: Any * Weight: 2.24 grams MAXIMUM RATINGS (@ TA=25 OC unless otherwise noted) ELECTRICAL CHARACTERISTICS (@TA=25 OC unless otherwise noted) RATINGS Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at Derating Case Temperature Peak Forward Surge Current 8.3 ms single half sine-wave superimposed on rated load (JEDEC method) Typical Thermal Resistance (Note 1) Typical Junction Capacitance (Note 3) SYMBOL VRRM VDC IFSM CJ TSTG VRMS UNITS Volts Volts Volts Amps16.0 150 2.0 700 Amps 0C/W 0 C Storage Temperature Range R q J C R q J A IO pF Operating Temperature Range TJ SR1620C 150 -55 to + 150 0 C SR1635CSR1630C SR1640C SR1645C SR1650C SR1660C 30 35 40 45 50 60 14 21 25 28 32 35 42 20 30 35 40 45 50 60 SR1680C SR16100C SR16150C SR16200C SR1620C SR1635CSR1630C SR1640C SR1645C SR1650C SR1660C SR1680C SR16100C SR16150C SR16200C 80 100 150 200 80 100 150 200 56 70 105 140 500 NOTES : 1. Thermal Resistance : Heat-sink mounted. 2. Suffix “A” = Common Anode. 3. Measured at 1 MHz and applied reverse voltage of 4.0 volts. 4. "Fully ROHS compliant", "100% Sn plating (Pb-free)". 2008-11 REV: A CHARACTERISTICS Maximum Average Reverse Current at Rated DC Blocking Voltage VF SYMBOL IR mA Maximum Instantaneous Forward Voltage at 8.0A DC Volts 0.2 @TA = 25 o C @TA = 100 o C .65 mA UNITS .75 .85

PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) INSTANTANEOUS FORWARD VOLTAGE, (V) INSTANTANEOUS FORWARD CURRENT, (mA) CASE TEMPERATURE, ( O 0.01 0.001 0.1 1.0 AVERAGE FORWARD CURRENT, (A) CJ, JUNCTION CAPACITANCE, (nF) 20 40 60 80 100 120 140150100500 1.0 1.20.6 1.8 RATING AND CHARACTERISTICS CURVES ( SR1620C THRU SR16200C ) FIG.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.1 TYPICAL FORWARD CURRENT DERATING CURVE FIG.2 TYPICAL REVERSE CHARACTERISTICS REVERSE VOLTAGE, (V) INSTANTANEOUS REVERSE CURRENT, (A) 0.1 0.1 0.8 0.6 0.4 0.2 400.4 1.0 4 10 80 100 FIG.4 TYPICAL JUNCTION CAPACITANCE NUMBER OF CYCLES AT 60Hz PEAK FORWARD SURGE CURRENT, (A) 125 150 100 2 5 10 20 50 100 FIG.5 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT Single Phase Half Wave 60Hz Inductive or Resistive Load TA = 25 O C 8.3mS Single Half Sine-Wave JEDEC Method TJ = 25 O C Pulse width=300mS 1% Duty Cycle SR1680C~SR16200C SR1620C~SR1640C SR1650C~SR1660C SR1620C~SR1640C SR1650C~SR16200C SR1620C~SR1640C SR1650C~SR1660C SR1680C~SR16200C TJ = 25 O C SR1620C~SR1645C SR1650C~SR16200C TA = 125 O C TA = 25 O C TA = 75 O C

Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi- lity for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" paramet- ers which may be included on RECTRON data sheets and/ or specifications ca- n and do vary in different applications and actual performance may vary over ti- me. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other rela- ted applications where a failure or malfunction of component or circuitry may di- rectly or indirectly cause injury or threaten a life without expressed written appr- oval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rect- ron Inc and its subsidiaries harmless against all claims, damages and expendit- ures. DISCLAIMER NOTICE