SR1316-V AUK | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
Features
- 1.6mm(L)×0.8mm small size surface mount type
- Thin package of 0.55mm(H) thickness
- Transparent clear lens optic
- Super luminosity
Applications
- LCD backlighting
- Keypad backlighting
- Symbol backlighting
- Front panel indicator lamp O u t l i n e D i m e n s i o n s u n i t : mm SSeemmiiccoonndduuccttoorr
Characteristic Symbol Ratings Unit Power Dissipation P D 65 mW Forward Current I F 25 mA *1Peak Forward Current I FP 50 mA Reverse Voltage V R 4 V Operating Temperature T opr -25∼80 °C Storage Temperature T stg -30∼100 °C *2Soldering Temperature T sol 240°C for 5 seconds *1.Duty ratio = 1/16, Pulse width = 0.1ms *2.Recommended soldering Temperature Profile Preheating area 120 Temp(℃) 220℃ Solder area max. 50sec 1~ 4℃/sec -2~ -6℃/sec 1~4℃/sec Peak time max 10secPeak Temp max 240℃ 140~ 160℃ Time(sec)
Electrical Characteristics
Characteristic Symbol Test Condition Min. Typ. Max. Unit Forward Voltage V F I F= 20mA 1.6 - 2.4 V Luminous Intensity IV IF= 20mA 18 - 55 mcd Peak Wavelength λP IF= 20mA - 660 - nm Spectrum Bandwidth ∆λ IF= 20mA - 20 - nm Reverse Current I R V R=4V - - 10 uA X - ±65 - *3Half Angle θ1/2 Y IF= 20mA - ±70 - deg *3. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity
Fig.4 Spectrum Distribution Fig. 3 IF – Ta Fig. 2 IV - IF Fig. 1 IF - VF Forward Current I F [mA] Ambient Temperature Ta [℃] Relative Intensity [%] Wavelength λ [nm] Forward Voltage V F [V] Forward Current I F [mA] Forward Current I F [mA] Luminous Intensity Iv [mcd] Fig. 5-1 Radiation Diagram(X) -60° -90° -30° 60° 90° 100 30° 50100 Relative Luminous Intensity Iv [%] Fig. 5-2 Radiation Diagram(Y) 100 50 30° -30° -90° -60° 100 90° 60° Relative Luminous Intensity Iv[%]
These AUK products are intended for usage in general electronic equipments(Office and communication equipment, measuring equipment, domestic electrification, etc.). Please make sure that you consult with us before you use these AUK products in equipm- ents which require high quality and/or reliabi lity, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic signal, combustion central, all types of safety device, etc.). AUK cannot accept liability to any damage which may occur in case these AUK products were used in the mentioned equipments without prior consultation with AUK.