SPWK GAMEWELL-FCI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 3

Technical content

Features

  • Plug-in design
  • Electrical compatibility with existing SpectrAlert products
  • Shorting spring on mounting plate tests continuity before installation
  • Rotary switch simplifies field selection of speaker voltage and power settings
  • Universal mounting plate for wall- and ceiling-mount units
  • Weatherproof per NEMA 4x, IP56
  • Compatible with System Sensor synchronization protocol
  • Automatic selection of 12- or 24-volt operation at 15 and 15/75 candela
  • Field selectable candela settings on wall and ceiling units
  • Ceiling and wall mount application SpectrAlert Advance

12 Clintonville Road, Northford, CT 06472-1610 USA • Tel: (203) 484-7161 • Fax: (203) 484-7118

9021-60345 Rev. A page 2 of 3 www.gamewell-fci.com Architectural/Engineering Specifications General SpectrAlert Advance outdoor speaker and speaker strobes shall mount to a weatherproof back box. A universal mounting plate shall be used for mounting ceiling and wall products. The notification appl iance circuit and amplifier wiring shall terminate at the universal mounting plate. Out- door SpectrAlert Advance products shall operate between –40°F and 151°F from a regula ted DC, or full-wave recti- fied, unfiltered power supply. Speaker The Speaker shall be a System Sensor SpectrAlert Advance Model ______ dual voltage transformer speaker capable of operating at 25.0 or 70.7 nominal Vrms. Speaker shall be Listed to UL ® Standard S4048 for out- door fire protective signaling systems. Speaker shall have a frequency range of 400 to 4000 Hz and shall have an operating temperature from –40°F to 150.8°F. Speaker shall have power taps and wattage settings which are selected by rotary switches. The speaker must be installed with its weatherproof backbox in order to remain outdoor approved per UL listing S4048. The speaker shall be suit- able for use in air handling spaces, as well as wet environ- ments. Speaker Strobe Combination The Speaker Strobe shall be a System Sensor Model _____listed to UL 1638 and UL 1480 and be approved for fire protective signaling systems. Speaker shall be capable of operating at 25.0 or 70.7 nominal Vrms, and shall have a frequency range of 400 to 4000 Hz. Speaker shall have power taps that are selected by rotary switch. The strobe shall consist of a xenon fl ash tube with associated lens/ reflector system and operate on either 12V or 24V. The strobe shall also feature selectable candela output, provid- ing options for 15 or 15/75 candela when operating on 12V and 15, 15/75, 30, 75, 110, 115, 135, 150, 177 or 185 when operating on 24V. The strobe shall comply with the Americans with Disabilities Act requirement for visible sig- naling appliances, flashing at 1 Hz over the strobe’s entire operating voltage range. The speaker strobe must be installed with its weatherproof back box in order to remain outdoor approved per UL. The speaker strobe shall be suitable for use in wet environments. Sound Output UL Reverberant (dBA@10 ft) 2 W 1 W 1/2 W 1/4 W Outdoor Speaker 90 87 84 81 Outdoor Speaker/Speaker Strobe 89 86 83 80 UL Maximum Strobe Current Draw (mA RMS) Candela 8 to 17.5 Volts 16 to 33 Volts D C F W R D C F W R Standard Candela Range 15 123 128 66 71 15/75 142 148 77 81

30 NA NA 94 96

75 NA NA 158 153

110 NA NA 202 195

115 NA NA 210 205

135 NA NA 228 207

150 NA NA 246 220

177 NA NA 281 251

185 NA NA 286 258

NOTE: For K series products used at low temperatures, listed candela ratings must be reduced in accordance with this table. Strobe Output (cd) Listed Candela Candela Rating at -40 F Do not use below 32 F15/75 75 44 95 70 110 110 115 115 135 135 150 150 177 177 185 185

www.gamewell-fci.com 9021-60345 Rev. A page 3 of 3 Specifications Physical Specifications Operting Temperature: -40°F to 151°F (-40°C to 66°C) Wall-Mount Dimensions: SPS Speaker Strobe: 6.0”L x 5.0”W x 4.9”D (including lens and speaker) SP Speaker: 6.0”L x 5.0”W x 2.9”D Ceiling Mount Dimensions: SPS Speaker Strobe: 6.8”Dia x 4.8”D (including lens and speaker) SP Speaker: 6.8”L x 2.9”D Wall-Mount Weatherproof Backbox: Dimensions: 6.5”L x 5.5”H x 2.9”D Ceiling-Mount Weatherproof Backbox: Dimensions: 7.2”Dia x 2.9”D Electrical/Operating Specifications: Nominal Voltage (speakers): 25 Volts or 70.7 Volts (nominal) Maximum Supervisory Voltage (speakers): 50VDC Strobe Flash Rate: 1 flash per second Nominal Voltage (Strobes): Regulated 12VDC/FWR or 24VDC/FWR Operating Voltage Range (includes fire panels with built-in sync): 8 to 17.5V (12V nominal) or 16 to 33V (24 nominal) Operating Voltage with MDL Sync Module: 9 to 17.5V (12V nominal) or 17 to 33V (24V nominal) Frequency Range: 400 to 4000Hz Power: ¼, ½, 1, 2 watts

Ordering Information

SPWK: Wall mount outdoor speaker; white SPRK: Wall mount outdoor speaker; red SPSWK: Wall mount outdoor speaker strobe, selectable candela (15, 15/75, 30, 75, 95, 100, 115); white SPSRK: Wall mount outdoor speaker strobe, selectable candela SPCWK: Ceiling mount outdoor speaker; white. SPSCWK: Ceiling mount outdoor speaker strobe, selectable candela (15, 15/75, 30, 50, 75, 95, 110, 115); white SPSCWHK: Ceiling mount outdoor speaker strobe, selectable candela, high cd (135, 150, 177, 185); white Accessories MWBB: Wall, metal weatherproof backbox; red MWBBW: Wall, metal weatherproof backbox; white MWBBCW: Ceiling, metal weatherproof backbox; white PWBB: Wall, plastic weatherproof backbox; red PWBBW: Wall, plastic weatherproof backbox; white PWBBCW: Ceiling, plastic weatherproof backbox; white