SPU63 MPSIND | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
63W Desk Top Switching Power Supplies For I.T.E. Electrical Characteristics: Description: Features: Environmental : Hr Relative Humidity Operating Temperature at 25 C, Calculated per MIL-HDBK-217F 0.13M Hrs Toper MTBF Operating Temperature Tstg Storage Temperature Pd 0 70 85 -40 Sym. Parameter Min. Typ. Max. Unit Derate linearly from 100% load at 40 C to 50% load at 70 C Test Conditions C C The SPU63 series of AC/DC switching mode power supplies provide 63Watts of continuous output power and is well-suited for a variety of applications. All supplies are UL 94V-1 min compliant. All models meet FCC Part-15 class B and CISPR-22 class B emission Limits and are designed to comply with UL/c- UL(UL 60950-1), TUV/GS(EN 60950-1) and new CE requirements. All units are 100% burned in and tested. Wide Input Voltage 90 to 264 VAC,47 to 63 Hz IEC-320-C14 Input Inlet Single output Optional Output Connector (See appendix) Over Voltage Protection (Crowbar Design) Class I Energy Star 2.0, Efficiency level V Altitude : 0 - 10,000 feet 2 year warranty Safety Approvals : CB Sym. Parameter Test Conditions Min. Typ. Max. Unit Vin Input Voltage Operating Voltage 90 264 VAC fin Input Frequency 47 63 Hz Po Output Power Range Vin=90 to 264VAC 0 63 W Vo Output Voltage Range See rating chart V Io Output Current Range See rating chart A Iil Input Current (Low Line) Io=Full load, Vin=115VAC 1.6 A Iih Input Current (High Line) Io=Full load, Vin=230VAC 0.7 A Irl Low Line Inrush Current Io=Full load, 25c, Cool start, Vin=115VAC 31 35 A Irh High Line Inrush Current Io=Full load, 25c, Cool start, Vin=230VAC 62 70 A Eff Efficiency Io=Full Load, Vin=230VAC 84 88 91 % REG-i Line Regulation Io=Full Load 0.5 1 % REG-o Load Regulation Vin=230VAC 3 5 % OVP Over Voltage Protection 112 132 % OCP Over Current Protection 102 150 % Ttr Time of Transient Response Io=Full Load to Half Load, Vin=100VAC 4 mS Thold Hold-Up Time Io=Full Load, Vin=110VAC 16 mS Ts Start Up Time Io=Full Load, Vin=100VAC 0.3 1 2 S Vrn Ripple & Noise (Peak to Peak) Full Load, Vin=90VAC 0.5 1 % Ilk Safety Ground Leakage Current Io=Full Load, Vin=240VAC 0.5 0.75 mA TC Temperature Coefficient All output -0.04 0.04 %/c Pno No-Load Power Consumption No load, Vin=240VAC 0.1 0.5 W S E PS&E
Note: 1. Dimensions are shown in mm. 2. Weight: 340gs approx. 3. Optional output connector: See page Appendix. Safety Specifications: Output Voltage And Current Rating Chart ( Single Output ) : Parameter Test Conditions Min. Typ. Max. Unit Dielectric Withstanding Voltage for Primary to secondary Primary to secondary 4242 VDC Primary to ground 2121 Test Voltage=500VDC 50 M Vin=220VAC B CLASS Sym. Vps Vpg Ris CISPR FCC Isolation Resistance EMI requirements for CISPR-22 Vin=110VAC VDC B CLASS Dielectric Withstanding Voltage for Primary to Ground EMI requirements for FCC PART-15 63W Desk Top Switching Power Supplies For I.T.E. Mechanical Specifications : The total regulation on SPU63-105 is required to use AWG#16/4FT output cable. ① The regulation will be changed by modified output cable. Model Number Output Voltage Output Current Total ① Regulation Maximum Output Power SPU63-105 12 ~ 14 VDC 4.75 ~ 4.07 A 5% 57W SPU63-106 15 ~ 16 VDC 4.20 ~ 3.94 A 5% 63W SPU63-107 16 ~ 21 VDC 3.94 ~ 3.00 A 5% 63W SPU63-108 21 ~ 27 VDC 3.00 ~ 2.33 A 5% 63W SPU63-109 27 ~ 33 VDC 2.33 ~ 1.91 A 5% 63W SPU63-110 33 ~ 40 VDC 1.91 ~ 1.58 A 3% 63W SPU63-111 40 ~ 50 VDC 1.58 ~ 1.26 A 3% 63W