SPU60 MPSIND | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
60W Desk Top Switching Power Supplies For I.T.E. Wide Operating Voltage 90 to 264 VAC,47 to 63 Hz IEC-320-C14 Input Inlet Single output Optional Output Connector (See appendix) Over Voltage Protection (Crowbar Design) Splash proof Class I 2 year warranty Safety Approvals : Electrical Characteristics: BC Description: Features: S&E The SPU60 series of AC/DC switching mode power supplies provide 60 Watts of continuous output power. All supplies are UL 94V-1 min compliant. All models meet FCC Part-15 class B and CISPR-22 class B emission Limits and are designed to ndcomply with UL/c-UL(UL 60950-1:2 Edition), Intertek/GS(EN nd60950-1:2 Edition) and new CE requirements. All units are 100% burned in and tested. Note: The Ripple & Noise which is under 3.3VDC at 2% max Agree to apply for the PSE if order on hand Environmental : Sym. Parameter Min. Typ. Max. UnitTest Conditions Tstg Storage Temperature -40 C Toper Operating Temperature 0 70 40 C Hr Storage Humidity 75 %0 Ho %Operating Humidity 95 0 Pd Derate linearly from 100% load at 40 C to 50% load at 70 C Hrs MTBF Operating Temperature at 25 C, Calculated per MIL-HDBK-217F 0.1M Sym. Parameter Test Conditions Min. Typ. Max. Unit Vin Safety Approvals Input Voltage Range 100 240 VAC Operate Voltage Range 90 264 VAC fin Input Frequency 47 63 Hz Po Output Power Range Vin=90 to 264VAC 0 60 W Vo Output Voltage Range See rating chart V Io Output Current Range See rating chart A Iil Input Current (Low Line) Io=Full load, Vin=115VAC 1.6 A Iih Input Current (High Line) Io=Full load, Vin=230VAC 1.0 A Irl Low Line Inrush Current Io=Full load, 25c, Cool start, Vin=115VAC 40 43 A Irh High Line Inrush Current Io=Full load, 25c, Cool start, Vin=230VAC 80 85 A Eff Efficiency Io=Full Load, Vin=230VAC 75 87 90 % REG-i Line Regulation Io=Full Load 0.5 1 % REG-o Load Regulation Vin=230VAC 3 7 % OVP Over Voltage Protection 112 132 % OCP Over Current Protection 110 150 % Ttr Time of Transient Response Io=Full Load to Half Load, Vin=100VAC 4 mS Thold Hold-Up Time Io=Full Load, Vin=110VAC 16 mS Ts Start Up Time Io=Full Load, Vin=100VAC 0.3 1 2 S Vp-p Ripple & Noise (Peak to Peak) Full Load, Vin=90VAC 0.5 1 % Ilk Safety Ground Leakage Current Io=Full Load, Vin=240VAC 0.5 0.75 mA TC Temperature Coefficient All output -0.04 0.04 %/c
Model Number Output Voltage Output Current Total Regulation Maximum Output Power SPU60-101 03 ~ 05 VDC 6.60 ~ 4.00 A 7% 20W SPU60-102 05 ~ 06 VDC 6.00 ~ 5.00 A 5% 30W SPU60-103 06 ~ 08 VDC 5.83 ~ 4.37 A 5% 35W SPU60-104 08 ~ 11 VDC 5.00 ~ 3.63 A 5% 40W SPU60-105 11 ~ 13 VDC 4.54 ~ 3.84 A 5% 50W SPU60-105-1 11 ~ 13 VDC 5.45 ~ 4.61 A 5% 60W SPU60-106 13 ~ 16 VDC 4.23 ~ 3.43 A 5% 55W SPU60-107 16 ~ 21 VDC 3.75 ~ 2.85 A 5% 60W SPU60-108 21 ~ 27 VDC 2.85 ~ 2.22 A 5% 60W SPU60-109 27 ~ 33 VDC 2.22 ~ 1.81 A 5% 60W SPU60-110 33 ~ 40 VDC 1.81 ~ 1.50 A 3% 60W SPU60-111 40 ~ 50 VDC 1.50 ~ 1.20 A 3% 60W SPU60 SERIES Note: 1. Dimensions are shown in mm. 2. Weight: 340gs approx. 3. Optional output connector: See page Appendix. Safety Specifications: Output Voltage And Current Rating Chart ( Single Output ) : Parameter Test Conditions Min. Typ. Max. Unit Dielectric Withstanding Voltage for Primary to secondary Primary to secondary 4242 VDC Primary to ground 2121 Test Voltage=500VDC 50 M Vin=220VAC B CLASS Sym. Vps Vpg Ris CISPR FCC Isolation Resistance EMI requirements for CISPR-22 Vin=110VAC VDC B CLASS Dielectric Withstanding Voltage for Primary to Ground EMI requirements for FCC PART-15 60W Desk Top Switching Power Supplies For I.T.E. Mechanical Specifications : Mark " " means " PSE approval " The output voltage above 12V had been approved by CEC Level V. SPU60-108 .had been approved by KC