SPU45-100 VOLGEN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Sym. Parameter Test Conditions Min. Typ. Max. Unit Vin Input Voltage Operating Voltage 90 264 VAC Fin Input Frequency 47 63 Hz Wo Output Power Range Vin=90 to 264VAC 0 50 W Vo Output Voltage Range See rating chart V Io Output Current Range See rating chart A Iil Input Current (Low Line) Io=Full load, Vin=115VAC 1.35 A Iih Input Current (High Line) Io=Full load, Vin=230VAC 0.7 A Irl Low Line Inrush Current Io=Full load, 25°c, Cool start, Vin=115VAC 12 15 A Irh High Line Inrush Current Io=Full load, 25°c, Cool start, Vin=230VAC 26 30 A Eff Efficiency Io=Full Load, Vin=230VAC 75 83 88 % REG-i Line Regulation Io=Full Load 0.5 1 % REG-o Load Regulation Vin=230VAC 3 7 % OVP Over Voltage Protection 112 132 % OCP Over Current Protection 110 150 % Ttr Transient Response Io=Full Load to Half Load, Vin=100VAC 4 mS Thold Hold-Up Time Io=Full Load, Vin=110VAC 16 mS Ts Start Up Time Io=Full Load, Vin=100VAC 0.3 1 2 S Vrn Ripple & Noise (Peak to Peak) Full Load, Vin=90VAC 1 2 % Ilk Safety Ground Leakage Current Io=Full Load, Vin=240VAC 0.5 0.75 mA Tc Temperature Coefficient All output -0.04 0.04 %/°c SPU45 SERIES 50W Desk Top Switching Power Supplies For I.T.E. Description: Wide Input Voltage 90 to 264 VAC,47 to 63 Hz IEC-320-C14 Input Inlet Single to Triple Output Output Voltage Available From 2VDC Thru 50VDC Optional Output Connector (See appendix) Input Surge Current, Over Voltage And Over Load protection Splash proof Class I Insulation Two Years Warranty Safety Approvals : Electrical Characteristics: Safety Specifications: CB Environmental : Product Safety Features: The SPU45 series of AC/DC switching mode power supplies provide 50 Watts of continuous output power. All supplies are UL 94V-1 min compliant, include IEC-320-C14 input for worldwide applications. All models meet FCC Part-15 class B and CISPR-22 class B emission Limits and are designed to comply with UL/c-UL(UL 60950-1), TUV/GS(EN 60950) and new CE requirements. All units are 100% burned in and tested. S&E Relative Humidity 5 95 % Operating Temperature Storage Temperature 0 70 85 -40 Toper Hr Tstg Pd Sym. Parameter Min. Typ. Max. Unit Derate linearly from 100% load at 40 C to 50% load at 70 C Te st Conditions C C Parameter Te st Conditions Min. Typ. Max. Unit Dielectric Withstanding Voltage for Primary to secondary Primary to secondary 4242 VDC Primary to ground 2121 Test Voltage=500VDC 50 M Vin=220VAC B CLASS Sym. Vps Vpg Ri CISPR FCC Isolation Resistance EMI requirements for CISPR-22 Vin=110VAC VDC B CLASS Dielectric Withstanding Voltage for Primary to Ground EMI requirements for FCC PART-15

50W Desk Top Switching Power Supplies For I.T.E. Output Voltage And Current Rating Chart (Single Output) : Model Number Output Voltage Output Current Total Regulation Maximum Output Power SPU45-100 02 ~ 03 VDC 8.00 A max 7% 24W SPU45-101 03 ~ 05 VDC 8.00 A max 5% 40W SPU45-102 05 ~ 06 VDC 8.00 ~ 6.66 A 5% 40W SPU45-103 06 ~ 08 VDC 7.00 ~ 5.25 A 5% 42W SPU45-104 08 ~ 11 VDC 5.63 ~ 4.00 A 4% 45W SPU45-105 11 ~ 13 VDC 4.00 ~ 3.46 A 3% 45W SPU45-106 13 ~ 16 VDC 3.46 ~ 2.81 A 3% 45W SPU45-107 16 ~ 21 VDC 3.12 ~ 2.38 A 3% 50W SPU45-108 21 ~ 27 VDC 2.30 ~ 1.85 A 2% 50W SPU45-109 27 ~ 33 VDC 1.85 ~ 1.51 A 2% 50W SPU45-110 33 ~ 40 VDC 1.51 ~ 1.25 A 2% 50W SPU45-111 40 ~ 50 VDC 1.25 ~ 1.00 A 2% 50W Note: 1. Dimensions are shown in mm. 2. Weight: 400-550gs approx. 3. Optional output connector: See page Appendix. inches or Mechanical Specifications: Output Voltage And Current Rating Chart ( Multi Output ) : Output #1 Output #2 Output #3 Model Number Vonom Iomin Iomax Regmax Vonom Iomin Iomax Regmax Vonom Iomin Iomax Regmax Maximum Output Power SPU45-200 +3.3V 0.5A 5A 7% +12V 0.3A 2A 5% 40W SPU45-201 +5V 0.5A 5A 5% +12V 0.3A 2A 5% 42W SPU45-202 +5V 0.8A 5A 7% +15V 0.3A 1.5A 5% 42W SPU45-203 +5V 0.5A 5A 5% +24V 0.1A 1A 5% 42W SPU45-204 +3.3V 0.5A 5A 7% +5V 0.2A 2A 5% 26.5W SPU45-209 +12V 0.3A 3A 5% -12V 0.1A 1A 5% 42W SPU45-210 +15V 0.2A 2A 5% -15V 0.1A 1A 5% 42W SPU45-215 +5V 0.5A 5A 5% -24V 0.1A 1A 5% 42W SPU45-301 +5V 0.5A 5A 5% +12V 0.2A 2A 5% -5V 0A 0.8A 5% 42W SPU45-302 +5V 0.5A 5A 5% +12V 0.2A 2A 5% -12V 0A 0.8A 5% 42W SPU45-303 +5V 0.5A 5A 5% +15V 0.3A 2A 6% -15V 0A 0.8A 5% 42W SPU45-304 +5V 0.5A 5A 5% +24V 0.2A 1A 5% -24V 0A 0.5A 5% 42W SPU45-305 +5V 0.5A 5A 5% +24V 0.1A 1A 5% -12V 0A 0.8A 5% 42W SPU45-306 +3.3V 0.5A 5A 7% +12V 0.4A 2A 5% -5V 0A 0.8A 5% 42W Mark " " means " PSE approval " Model -106 has PSE approval which is below 15V