SPU31 MPSIND | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
30W Desk Top Switching Power Supplies For I.T.E. Description: Wide Input Voltage 90 to 264 VAC,47 to 63 Hz IEC-320-C14 Input Inlet Single Output Output Voltage Available From 5 VDC Thru 50 VDC Optional Output Connector (See appendix) Energy Star 2.0, Efficiency level V Class I 2 year warranty Electrical Characteristics: Safety Approvals: Features: Environmental : Hr Relative Humidity 5 95 % Toper Operating Temperature Tstg Storage Temperature Pd 0 70 85 -40 Sym. Parameter Min. Typ. Max. Unit Derate linearly from 100% load at 40 C to 50% load at 70 C Test Conditions C C The SPU31 series of AC/DC switching mode power supplies provide 30 Watts of continuous output power. All supplies are UL 94V-1 min compliant, include IEC-320-C14 input for worldwide applications. All models meet FCC Part-15 class B and CISPR-22 class B emission Limits and are designed to comply with UL/c-UL(UL 60950-1), TUV/GS (EN 60950-1) and new CE requirements. All units are 100% burned in and tested. Hrs MTBF Operating Temperature at 25 C, Calculated per MIL-HDBK-217F 0.1M CB Sym. Parameter Test Conditions Min. Typ. Max. Unit Vin Input Voltage Operating Voltage 90 264 VAC fin Input Frequency 47 63 Hz Po Output Power Range Vin=90 to 264VAC 0 30 W Vo Output Voltage Range See rating chart V Io Output Current Range See rating chart A Iil Input Current (Low Line) Io=Full load, Vin=115VAC 0.8 A Iih Input Current (High Line) Io=Full load, Vin=230VAC 0.5 A Irl Low Line Inrush Current Io=Full load, 25c, Cool start, Vin=115VAC 38 45 A Irh High Line Inrush Current Io=Full load, 25c, Cool start, Vin=230VAC 26 30 A Eff Efficiency Io=Full Load, Vin=230VAC 73 81 90 % REG-i Line Regulation Io=Full Load 0.5 1 % REG-o Load Regulation Vin=230VAC 3 7 % OCP Over Current Protection 110 150 % Ttr Time of Transient Response Io=Full Load to Half Load, Vin=100VAC 4 mS Thold Hold-Up Time Io=Full Load, Vin=110VAC 12 mS Ts Start Up Time Io=Full Load, Vin=100VAC 0.3 1 2 S Vrn Ripple & Noise (Peak to Peak) Full Load, Vin=90VAC 0.5 1 % Ilk Safety Ground Leakage Current Io=Full Load, Vin=240VAC 0.5 0.75 mA TC Temperature Coefficient All output -0.04 0.04 %/c Pno No-Load Power Consumption No load, Vin=240VAC 0 0.3 0.5 W Agree to apply for the PSE if order on hand
30W Desk Top Switching Power Supplies For I.T.E. Mechanical Specifications : Note: 1. Dimensions are shown in mm. 2. Weight: 265~280gs approx. 3. Optional output connector: See page Appendix. Safety Specifications: Output Voltage And Current Rating Chart ( Single Output ) : Parameter Test Conditions Min. Typ. Max. Unit Dielectric Withstanding Voltage for Primary to secondary Primary to secondary 4242 VDC Primary to ground 2121 Test Voltage=500VDC 50 M Vin=220VAC B CLASS Sym. Vps Vpg Ris CISPR FCC Isolation Resistance EMI requirements for CISPR-22 Vin=110VAC VDC B CLASS Dielectric Withstanding Voltage for Primary to Ground EMI requirements for FCC PART-15 The total regulation on model 101~105 is required to use AWG#16 / 4FT output cable. The total regulation on model 106~108 is required to use AWG#18 / 4FT output cable. The total regulation on model 109~111 is required to use AWG#18 / 6FT output cable The regulation will be changed by modified output cable Model Number Output Voltage Output Current Total ① Regulation Maximum Output Power SPU31-102 05 ~ 06 VDC 4.00 ~ 3.33 A 5% 20W SPU31-103 06 ~ 08 VDC 4.16 ~ 3.12 A 5% 25W SPU31-104 08 ~ 11 VDC 3.75 ~ 2.72 A 5% 30W SPU31-105 11 ~ 13 VDC 2.72 ~ 2.30 A 5% 30W SPU31-106 13 ~ 16 VDC 2.30 ~ 1.87 A 5% 30W SPU31-107 16 ~ 21 VDC 1.87 ~ 1.42 A 5% 30W SPU31-108 21 ~ 27 VDC 1.42 ~ 1.11 A 3% 30W SPU31-109 27 ~ 33 VDC 1.11 ~ 0.90 A 3% 30W SPU31-110 33 ~ 40 VDC 0.90 ~ 0.75 A 3% 30W SPU31-111 40 ~ 50 VDC 0.75 ~ 0.60 A 3% 30W The output voltage under 15V had been approved by TUV/PSE. The model had been approved by CEC level V number of 104~111 . The model had been approved by KC number of 106 .