SPU15 MPSIND | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
15W Interchangeable Wall Mount Switching Power Supplies For I.T.E. The SPU15 series of AC/DC switching mode power supplies provide 15 Watts of continuous output power and is well-suited for a variety of applications. All supplies are UL 94V-1 min compliant. All model meet FCC Part-15 class B and CISPR-22 class B emission Limits and are designed to comply with UL/c- nd ndUL(UL 60950-1:2 Edition), TUV/GS(EN 60950-1:2 Edition) and new CE requirements. All units are 100% burned-in and tested. Description: Wide Operating Voltage 90 to 264VAC,47 to 63 Hz Interchangeable Plug Optional Output Connector (See appendix) Single Output Energy Star 2.0, Efficiency level V Class II 2 year warranty Features: Safety Approvals: CB S E PRT Environmental : Toper Operating Temperature Tstg Storage Temperature 0 70 85 -40 Sym. Parameter Min. Typ. Max. UnitTest Conditions C C Hr Ho Storage Humidity 75 % %Operating Humidity Pd 95 0 Derate linearly from 100% load at 40 C to 50% load at 70 C Hrs MTBF Operating Temperature at 25 C, Calculated per MIL-HDBK-217F 0.1M Agree to apply for the PSE if order on handElectrical Characteristics: Sym. Parameter Test Conditions Min. Typ. Max. Unit Vin Safety Approvals Input Voltage Range 100 240 VAC Operate Voltage Range 90 264 VAC fin Input Frequency 47 63 Hz Po Output Power Range Vin=90 to 264VAC 15 W Vo Output Voltage Range See rating chart V Io Output Current Range See rating chart A Iil Input Current (Low Line) Io=Full load, Vin=115VAC 0.4 A Iih Input Current (High Line) Io=Full load, Vin=230VAC 0.26 A Irl Low Line Inrush Current Io=Full load, 25c, Cool start, Vin=115VAC 40 45 A Irh High Line Inrush Current Io=Full load, 25c, Cool start, Vin=230VAC 80 90 A Eff Efficiency Io=Full Load, Vin=230VAC 74.7 79 85 % REG-i Line Regulation Io=Full Load 0.5 1 % REG-o Load Regulation Vin=230VAC 3 10 % OVP Over Voltage Protection Nil % OCP Over Current Protection Nil.But,Output protected to short circut conditions % Ttr Time of Transient Response Io=Full Load to Half Load, Vin=100VAC 4 mS Thold Hold-Up Time Io=Full Load, Vin=110VAC 12 mS Ts Start Up Time Io=Full Load, Vin=100VAC 2 3 S Vp-p Ripple & Noise (Peak to Peak) Full Load, Vin=90VAC 0.5 1 % Ilk Safety Ground Leakage Current Io=Full Load, Vin=240VAC 0.25 mA TC Temperature Coefficient All output -0.04 0.04 %/c Pno No-Load Power Consumption No load, Vin=240VAC 0.25 0.3 W
Safety Specifications: Note: 1. Dimensions are shown in mm. 2. Weight: 165gs approx. 3. Optional output connector: See page Appendix. Mechanical Specifications : Output Voltage And Current Rating Chart ( Single Output ) : Parameter Test Conditions Min. Typ. Max. Unit Dielectric Withstanding Voltage for Primary to secondary Primary to secondary 4242 VDC Sym. Vps Test Voltage=500VDC 50 M Vin=220VAC B CLASS Ris CISPR FCC Isolation Resistance EMI requirements for CISPR-22 Vin=110VAC B CLASSEMI requirements for FCC PART-15 SPU15-102~104 are required to use AWG#18/4FT output cable. SPU15-105~109 are required to use AWG#20/4FT output cable. SPU15-110~111 are required to use AWG#22/4FT output cable. The regulation and efficiency will be changed by modified output cable. SPU15 SERIES 15W Interchangeable Wall Mount Switching Power Supplies For I.T.E. Model Number. Output Voltage Max. Output Current Total Regulation Max. Output Watts SPU15-102 5 ~ 5.99 VDC 2.40 ~ 2.00 A 5% 12W SPU15-103 6.5 ~ 8 VDC 1.85 ~ 1.50 A 5% 12W SPU15-104 8 ~ 11 VDC 1.68 ~ 1.22 A 5% 13.5W SPU15-105 11 ~ 13 VDC 1.36 ~ 1.15 A 5% 15W SPU15-106 13 ~ 16 VDC 1.15 ~ 0.94 A 5% 15W SPU15-107 16 ~ 21 VDC 0.94 ~ 0.72 A 5% 15W SPU15-108 21 ~ 27 VDC 0.72 ~ 0.55 A 3% 15W SPU15-109 27 ~ 33 VDC 0.55 ~ 0.45 A 3% 15W SPU15-110 33 ~ 40 VDC 0.45 ~ 0.37 A 3% 15W SPU15-111 40 ~ 48 VDC 0.37 ~ 0.32 A 3% 15W