SPU131 ASTRODYNE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Iih 0.70 1.40 Irl 0.5 1 TC -0.04 0.04 Vin=90 to 260 VAC Io=Full load, Vin=115 VAC Io=Full Load, Vin=230VAC Io=Full Load Vin=230VAC Io=Full Load to Half Load, Vin=100VAC Io=Full Vin=110VAC Load, Vin=100VAC Full Load, Vin=90VAC Io= Full Load, Io=Full load, Vin= 230 VAC W A A A A A All output % / C Input Frequency Output Power Range Output See rating chart See rating chart Voltage Range Output Current Range Input Input Current (Low Line) Efficiency Line Regulation Load Regulation Over Voltage Protection Over Current Protection Transient Time of Response Hold-Up Time Start Up Time Ripple & Noise (Peak to Peak) Safety Ground Leakage Current Current (High Line) Temperature Coefficient load, 25 , Coolstart,C Vin=115VAC Vin=230VAC mS S mA mS 63 47 Low Line Inrush Current V Hzfin Po Vo Io load, 25 , Coolstart,C 130 Io=Full Load, 89 87 132 150 110 112 High Line Inrush Current Io=Full Io=Full
0.75 Vin=240VAC/60Hz
Power Factor Correction Io=Full load, Vin=230 VAC 0.95 1PF Electrical Characteristics: Sym. Parameter Test Conditions Min. Typ. Max. Unit Safety Approvals : Vin SPU131 SERIES 130W Desk Top Switching Power Supplies For I.T.E. Features: Description: Wide Operating Voltage 90 to 260 VAC,47 to 63 Hz IEC-320-C14 Input Inlet Single Output Optional Output Connector (See appendix) Input Surge Current, Over Voltage And Over Load protection Output Voltage Protection (Crowbar Design) Active Power Factor Correction Class I Energy Star 2.0, Efficiency level V ON/OFF SWITCH (Optional) 2 year warranty 260 90
240 VAC100
The SPU131 series of AC/DC switching mode power supplies provide 130 Watts of continuous output power . All supplies are UL94V-1 min compliant. They are suited for a variety of applications. All models meet FCC Part-15 class B and CISPR-
22 En55022 class B emission Limits and are designed to
ndcomply with UL/c-UL(UL 60950-1:2 Edition) ,TUV/T-mark nd(EN 60950-1:2 Edition) and new CE requirements. All units are 100% burned in and tested. Environmental : Sym. Parameter Min. Typ. Max. UnitTest Conditions Tstg Storage Temperature -40 C Toper Operating Temperature 0 70 40 C Hr Storage Humidity 75 %0 Ho %Operating Humidity 95 0 Pd Derate linearly from 100% load at 40 C to 50% load at 70 C Hrs MTBF Operating Temperature at 25 C, Calculated per MIL-HDBK-217F 0.1M S&E S E PRT Agree to apply for the PSE if order on hand
Model Number Output Voltage Output Current Total Regulation SPU131-105 SPU131-106 SPU131-107 SPU131-108 SPU131-109 SPU131-110 SPU131-111 SPU131-112 12 ~ 13 VDC 13 ~ 16 VDC 16 ~ 21 VDC 21 ~ 27 VDC 27 ~ 33 VDC 33 ~ 40 VDC 40 ~ 50 VDC 50 ~ 55 VDC 10.84~10.00 A 10.00~8.12 A 8.12~6.19 A 6.19~4.81 A 4.81~3.93 A 3.93~3.25 A 3.25~2.60 A 2.60~2.36 A 130W 130W 130W 130W 130W 130W 130W 130W Output Voltage And Current Rating Chart (Single Output) : Note: 1. Dimensions are shown in mm. 2. Weight: 778-800gs approx. 3. Optional output connector: See page Appendix. inches or Mechanical Specifications: Output Power 130W Desk Top Switching Power Supplies For I.T.E. Maximum SPU131 SERIES Safety Specifications: Parameter Test Conditions Min. Typ. Max. Unit Dielectric Withstanding Voltage for Primary to secondary for Primary to secondary Primary to secondary 4242 VDC Primary to ground 2121 Io=Full load,Vin=230VAC 50 M Vin=220VAC B CLASS Sym. Vps Vpg Ris CISPR FCC VDC B CLASS Dielectric Withstanding Voltage Isolation Resistance EMI requirements for CISPR-22 for FCC PART-15EMI requirements Vin=110VAC SPU131-105~106 are required to use AWG#16*5C/4FT output cable. SPU131-107 is required to use AWG#16*4C/4FT output cable. SPU131-108~110 are required to use AWG#16*2C/4FT output cable. SPU131-111~112 are required to use AWG#18*2C/4FT output cable. The regulation and efficiency will be changed by modified output cable. The output voltage under 30V had been approved by TUV/PSE.