SPU130 MPSIND | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

Sym. Parameter Test Conditions Min. Typ. Max. Unit Vin Input Voltage Operating Voltage 90 264 VAC Fin Input Frequency 47 63 Hz PFC Power Factor Correction Io=Full load, Vin=230 VAC 0.95 0.99 Wo Output Power Range Vin=90 to 264VAC 0 130 W Vo Output Voltage Range See rating chart V Io Output Current Range See rating chart A Iil Input Current (Low Line) Io=Full load, Vin=115VAC 3.2 A Iih Input Current (High Line) Io=Full load, Vin=230VAC 1.7 A Irl Low Line Inrush Current Io=Full load, 25°c ,Cool start, Vin=115VAC 15 30 A Irh High Line Inrush Current Io=Full load, 25°c, Cool start, Vin=230VAC 30 60 A Eff Efficiency Io=Full Load, Vin=230VAC 80 85 % REG-i Line Regulation Io=Full Load 0.5 1 % REG-o Load Regulation Vin=230VAC 3 7 % OVP Over Voltage Protection 112 132 % OCP Over Current Protection 110 150 % Ttr Transient Response Io=Full Load to Half Load, Vin=100VAC 4 mS Thold Hold-Up Time Io=Full Load, Vin=110VAC 75 mS Ts Start Up Time Io=Full Load, Vin=100VAC 0.3 1 2 S Vrn Ripple & Noise (Peak to Peak) Full Load, Vin=90VAC 1 2 % Ilk Safety Ground Leakage Current Io=Full Load, Vin=240VAC 0.5 0.75 mA Tc Temperature Coefficient All output -0.04 0.04 %/°c SPU130 SERIES 130W Desk Top (or Mounting Tab) Switching Power Supplies For I.T.E. ( PFC ) The SPU130 series of AC/DC switching mode power supplies provide 130 Watts of continuous output power. All supplies are UL 94V-1 min compliant, include IEC-320-C14 input for worldwide applications. All models meet FCC Part-15 class B and CISPR-22 class B emission Limits and are designed to comply with UL/c- UL(UL 60950-1) , ITS/GS(EN 60950) and new CE requirements. All units are 100% burned in and tested. Safety Approvals : Electrical Characteristics: Include a cooling fan Wide Input Voltage 90 to 264 VAC,47 to 63 Hz IEC-320-C14 Input Inlet Output Voltage Available From 3 VDC Thru 55 VDC Optional Output Connector (See appendix) Single and Dual Output Input Surge Current, Over Voltage and Over Load protection Power Factor Correction(PFC) Long Hold Up Times (75ms) Class I Insulation Two years warranty Option : Mounting Tab and Desk Top Environmental : CB Description: Features: Hr Relative Humidity 5 95 % Toper Operating Temperature Tstg Storage Temperature Pd 0 70 85 -40 Sym. Parameter Min. Typ. Max. Unit Derate linearly from 100% load at 40 C to 50% load at 70 C Te st Conditions C C

Safety Specifications: Mechanical Specifications : Output Voltage And Current Rating Chart ( Single Output ) : Model Number Output Voltage Output Current Total Regulation Maximum Output Power SPU130-101 03 ~ 05 VDC 30.00 ~ 18.00 A 7% 90W SPU130-102 05 ~ 06 VDC 23.00 ~ 19.16 A 7% 115W SPU130-103 06 ~ 08 VDC 21.60 ~ 16.25 A 7% 130W SPU130-104 08 ~ 11 VDC 16.25 ~ 11.80 A 5% 130W SPU130-105 11 ~ 13 VDC 11.80 ~ 10.00 A 5% 130W SPU130-106 13 ~ 16 VDC 10.00 ~ 08.12 A 5% 130W SPU130-107 16 ~ 21 VDC 08.12 ~ 06.19 A 5% 130W SPU130-108 21 ~ 27 VDC 06.19 ~ 04.81 A 5% 130W SPU130-109 27 ~ 33 VDC 04.81 ~ 03.93 A 5% 130W SPU130-110 33 ~ 40 VDC 03.93 ~ 03.25 A 3% 130W SPU130-111 40 ~ 50 VDC 03.25 ~ 02.60 A 3% 130W SPU130-112 50 ~ 55 VDC 02.60 ~ 02.36 A 3% 130W Output #1 Output #2 Model Number Vonom Iomin Iomax Regmax Vonom Iomin Iomax Regmax Maximum Output Power SPU130-200 +3.3V 4A 20A 10% +12V 0A 2A 5% 90W SPU130-201 +5V 4A 20A 5% +12V 0A 2A 5% 120W SPU130-201-1 +5V 2A 10A 5% +12V 1A 5A 10% 110W SPU130-202 +5V 4A 20A 5% +15V 0A 2A 5% 120W SPU130-203 +5V 4A 20A 5% +24V 0A 2A 5% 120W Output Voltage And Current Rating Chart ( Multi Output ) : Note: 1. Dimensions are shown in mm. 2. Weight: 860gs approx. 3. Optional output connector: See page Appendix . 4. Option : Mounting T ab and Desk Top Mark " " means " PSE approval " Model -106 has PSE approval which is below 15V Parameter Te st Conditions Min. Typ. Max. Unit Dielectric Withstanding Voltage for Primary to secondary Primary to secondary 4242 VDC Primary to ground 2121 Test Voltage=500VDC 50 M Vin=220VAC B CLASS Sym. Vps Vpg Ri CISPR FCC Isolation Resistance EMI requirements for CISPR-22 Vin=110VAC VDC B CLASS Dielectric Withstanding Voltage for Primary to Ground EMI requirements for FCC PART-15 130W Desk Top (or Mounting Tab) Switching Power Supplies For I.T.E. ( PFC )