SPU12B-101 VOLGEN | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Sym. Parameter Test Conditions Min. Typ. Max. Unit Vin Input Voltage Operating Voltage 90 264 VAC Fin Input Frequency 47 63 Hz Wo Output Power Range Vin=90 to 264VAC 0 15 W Vo Output Voltage Range See rating chart V Io Output Current Range See rating chart A Iil Input Current (Low Line) Io=Full load, Vin=115VAC 0.4 A Iih Input Current (High Line) Io=Full load, Vin=230VAC 0.3 A Irl Low Line Inrush Current Io=Full load, 25°c, Cool start, Vin=115VAC 12 15 A Irh High Line Inrush Current Io=Full load, 25°c, Cool start, Vin=230VAC 26 30 A Eff Efficiency Io=Full Load, Vin=230VAC 60 70 78 % REG-i Line Regulation Io=Full Load 0.5 1 % REG-o Load Regulation Vin=230VAC 3 7 % OVP Over Voltage Protection Nil % OCP Over Current Protection Nil But,Output protected to short circuit conditions % Ttr Transient Response Io=Full Load to Half Load, Vin=100VAC 4 mS Thold Hold-Up Time Io=Full Load, Vin=110VAC 5 mS Ts Start Up Time Io=Full Load, Vin=100VAC 0.3 1 2 S Vrn Ripple & Noise(Peak to Peak) Full Load, Vin=90VAC 1 2 % Ilk Safety Ground Leakage Current Io=Full Load, Vin=240VAC 0.5 0.75 mA Tc Temperature Coefficient All output -0.04 0.04 %/°c Electrical Characteristics: SPU12B SERIES Environmental : 15W Wall Mount Switching Power Supplies For I.T.E. The SPU12B series of AC/DC switching mode power supplies provide 15 Watts of continuous output power. All supplies are UL 94V-1 min compliant, include a 3 prong plug-in mains connector for certain applications. All models meet CISPR-22 class B emission Limits and are designed to comply with new CE requirements. All units are 100% burned in and tested. Wide Input Voltage 90 to 264 VAC,47 to 63 Hz
3 Prong Plug-In Mains Connector
Output Voltage Available From 3VDC Thru 50VDC Optional Output Connector (See appendix) Single Output Class II Insulation (Double Insulation) Two years warranty Safety Approvals: Description: Features: CBCB Hr Relative Humidity 5 95 % Toper Operating Temperature Tstg Storage Temperature Pd 0 70 85 -40 Sym. Parameter Min. Typ. Max. Unit Derate linearly from 100% load at 40 C to 50% load at 70 C Te st Conditions C C No-Condensing
15W Wall Mount Switching Power Supplies For I.T.E. Safety Specifications: Output Voltage And Current Rating Chart ( Single Output ) : Mechanical Specifications: ( UK Type ) Note: 1. Dimensions are shown in mm. 2. Weight: 115gs approx. 3. Optional output connector: See page Appendix. Model Number Output Voltage Output Current Total Regulation Maximum Output Power SPU12B-101 3 ~ 15 VDC 3.30 ~ 2.00 A 7% 10W SPU12B-102 5 ~ 16 VDC 2.00 ~ 1.66 A 5% 10W SPU12B-103 6 ~ 18 VDC 1.66 ~ 1.25 A 5% 10W SPU12B-104 8 ~ 11 VDC 1.50 ~ 1.09 A 5% 12W SPU12B-105 11 ~ 13 VDC 1.36 ~ 1.15 A 5% 15W SPU12B-106 13 ~ 16 VDC 1.15 ~ 0.93 A 5% 15W SPU12B-107 16 ~ 21 VDC 0.93 ~ 0.71 A 3% 15W SPU12B-108 21 ~ 27 VDC 0.71 ~ 0.55 A 3% 15W SPU12B-109 27 ~ 33 VDC 0.59 ~ 0.48 A 3% 16W SPU12B-110 33 ~ 40 VDC 0.45 ~ 0.37 A 3% 15W SPU12B-111 40 ~ 50 VDC 0.37 ~ 0.30 A 3% 15W (OPTI ONAL) Parameter Te st Conditions Min. Typ. Max. Unit Dielectric Withstanding Voltage for Primary to secondary Primary to secondary 4242 VDC Test Voltage=500VDC 50 M Vin=220VAC B CLASS Sym. Vps Ri CISPR FCC Isolation Resistance EMI requirements for CISPR-22 Vin=110VAC B CLASSEMI requirements for FCC PART-15