SPU100 MPSIND | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 2
Technical content
Electrical Characteristics: Sym. Parameter Test Conditions Min. Typ. Max. Unit Iil 1.35 Irh Eff REG-i REG-o OVP OCP Ttr Thold 12 Ts 0.3 1.5 0.5 0.5 Vrn Ilk Iih 0.5 Irl 0.5 1 TC -0.04 0.04 Vin=90 to 260 VAC Io=Full load, Vin=115 VAC Io=Full Load, Vin=230VAC Io=Full Load Vin=230VAC Io=Full Load to Half Load, Vin=100VAC Io=Full Vin=110VAC Load, Vin=100VAC Full Load, Vin=90VAC Io= Full Load, Io=Full load, Vin= 230 VAC W V A A A A A All output % / C Input Voltage Input Frequency Output Power Range Output Voltage Range Output Current Range Input Current (Low Line) Efficiency Line Regulation Load Regulation Over Voltage Protection Over Current Protection Transient Time of Response Hold-Up Time Start Up Time Ripple & Noise (Peak to Peak) Safety Ground Leakage Current Input Current (High Line) Temperature Coefficient load, 25 , Coolstart,C Vin=115VAC Vin=230VAC mS S mA mS 260 90 See rating chart 44 50 85 100 3 5 Low Line Inrush Current VAC Hz Vin fin Po Vo Io load, 25 , Coolstart,C SPU100 SERIES 100W Desk Top Switching Power Supplies For I.T.E. 100 Io=Full Load, 90 87 132 150 110 112 High Line Inrush Current Io=Full Io=Full See rating chart 0.75 Environmental : Hr Relative Humidity 5 95 % Toper Operating Temperature Tstg Storage Temperature Pd 0 70 Derate linearly from 100% load at 40 C to 50% load at 70 C 85 -40 C C Sym. Parameter Test Conditions Min. Typ. Max. Unit Features: Description: Wide Input Voltage 90 to 260 VAC,47 to 63 Hz IEC-320-C14 Input Inlet Single Output Output Voltage Available From 11VDC Thru 48VDC Optional Output Connector (See appendix) Input Surge Current, Over Voltage And Over Load protection Over Voltage Protection Active Power Factor Correction Class I Energy Star 2.0, Efficiency level V 2 year warranty Operating Voltage The SPU100 series of AC/DC switching mode power supplies provide 100 Watts of continuous output power . All supplies are UL94V-1 min compliant, include IEC-320-C14 input for worldwide applications. All models meet FCC Part-15 Calss B and CISPR-11 EN55022 class B emission Limits and are designed to comply with UL/c-UL(UL 60950-1) ,TUV/T-mark (EN 60950-1) and new CE requirements. All units are 100% burned in and tested. Vin=240VAC/60Hz Power Factor Correction Io=Full load, Vin=230 VAC 0.95 1PF Hrs MTBF Operating Temperature at 25 C, Calculated per MIL-HDBK-217F 0.1M Safety Approvals : CBCB S E PS&E
Note: 1. Dimensions are shown in mm. 2. Weight: 490-670gs approx. 3. Optional output connector: See page Appendix. inches or Mechanical Specifications: SPU100 SERIES Safety Specifications: Parameter Test Conditions Min. Typ. Max. Unit Dielectric Withstanding Voltage for Primary to secondary Primary to secondary 4242 VDC Primary to ground 2121 Test Voltage = 2100VDC 50 M Vin=230VAC B CLASS Sym. Vps Vpg Ris CISPR Isolation Resistance EMI requirements for CISPR-11 VDCDielectric Withstanding Voltage for Primary to Ground 100W Desk Top Switching Power Supplies For I.T.E. FCC Vin=120VAC B CLASSEMI requirements for FCC PART-15 Model Number Output Voltage Output Current Total Regulation SPU100-105 11 ~ 13 VDC 9.09 ~ 7.69 A 5% 100W SPU100-106 13 ~ 16 VDC 7.69 ~ 6.25 A 4% 100W SPU100-107 16 ~ 21 VDC 6.25 ~ 4.76 A 4% 100W SPU100-108 21 ~ 27 VDC 4.76 ~ 3.70 A 4% 100W SPU100-109 27 ~ 33 VDC 3.70 ~ 3.03 A 3% 100W SPU100-110 33 ~ 40 VDC 3.00 ~ 2.50 A 3% 100W SPU100-111 40 ~ 48 VDC 2.50 ~ 2.08 A 3% 100W Output Voltage And Current Rating Chart (Single Output) : Output Power Maximum① The total regulation on each model is required to use AWG#18×3C+ AWG#16×3C/4FT output cable. ① The regulation will be changed by modified output cable.