STPS30L30CT_07 IRF | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 8

Technical content

Bulletin PD-20626 rev. D 01/07 This center tap Schottky rectifier has been optimized for very low forward voltage drop, with moderate leakage. The propri- etary barrier technology allows for reliable operation up to 150° C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 150° C T J operation Center tap configuration Very low forward voltage drop High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance High frequency operation Guard ring for enhanced ruggedness and long term reliability Description/ FeaturesMajor Ratings and Characteristics IF(AV) Rectangular 2 x 15 A waveform VRRM 30 V VF @ 15 Apk, TJ = 125°C 0.37 V (Per Leg) TJ range - 55 to 150 °C Characteristics Values Units STPS30L30CT STPS30L30CG Case Styles STPS30L30CT TO-220 STPS30L30CG D2PAK www.irf.com BASE COMMON CATHODE 123 ANODECOMMON CATHODE ANODE BASE COMMON CATHODE 123 ANODECOMMON CATHODE ANODE IF(AV) = 30Amp VR = 30V

STPS30L30CT, STPS30L30CG Bulletin PD-20626 rev. D 01/07 www.irf.com TJ Max. Junction Temperature Range -55 to 150 °C Tstg Max. Storage Temperature Range -55 to 150 °C RthJC Max. Thermal Resistance Junction 1.5 °C/W DC operation to Case (Per Leg) RthJC Max. Thermal Resistance Junction 0.8 °C/W DC operation to Case (Per Package) wt Approximate Weight 2 (0.07) g (oz.) T Mounting Torque Min. 6 (5) Max. 12 (10) Marking Device STPS 30L30CT Case Style TO-220 STPS30L30CG Case Style D2Pak VR Max. DC Reverse Voltage (V) 30 VRWM Max. Working Peak Reverse Voltage (V) Voltage Ratings Absolute Maximum Ratings Parameters Values Units Conditions IF(AV) Max. Average Forward Per Device 30 A 50% duty cycle @ TC = 140°C, rectangular wave form Current Per Leg 15 IFSM Max. Peak One Cycle Non-Repetitive 1450 A 5 μs Sine or 3μs Rect. pulse Surge Current 220 10ms Sine or 6ms Rect. pulse EAS Non-Repetitive Avalanche Energy 15 mJ T J = 25 °C, IAS = 2 Amps, L = 7.5 mH (Per Leg) IAR Repetitive Avalanche Current 2 A Current decaying linearly to zero in 1 μsec (Per Leg) Frequency limited by T J max. VA = 1.5 x VR typical Thermal-Mechanical Specifications Kg-cm (Ibf-in) Parameters Values Units Conditions TJ = 25 °C TJ = 125 °C Electrical Specifications (1) Pulse Width < 300μs, Duty Cycle <2% VR = rated VR Parameters Values Units Conditions Parameters Values VFM Max. Forward Voltage Drop 0.46 V @ 15A (Per Leg) (1) 0.57 V @ 30A

0.37 V @ 15A

0.50 V @ 30A

IRM Max. Reverse Leakage Current 1.50 mA T J = 25 °C (Per Leg) 350 mA T J = 125 °C C T Max. Junction Capacitance(Per Leg) 1500 pF V R = 5VDC (test signal range 100Khz to 1Mhz) 25°C LS Typical Series Inductance (Per Leg) 8.0 nH Measured lead to lead 5mm from package body dv/dt Max. Voltage Rate of Change 10000 V/ μs (Rated VR) Following any rated load condition and with rated VRRM applied

STPS30L30CT, STPS30L30CG Bulletin PD-20626 rev. D 01/07 www.irf.com Fig. 1 - Maximum Forward Voltage Drop Characteristics Reverse Voltage - VR (V) Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage Forward Voltage Drop - VFM (V) Instantaneous Forward Current - I F (A) Reverse Voltage - VR (V) Junction Capacitance - C T (pF) Fig. 4 - Max. Thermal Impedance Z thJC Characteristics t1, Rectangular Pulse Duration (Seconds) Thermal Impedance Z thJC (°C/W) Reverse Current - I R (mA) 0.01 0.1 100 1000 0 5 10 15 20 25 30 125˚C 100˚C 75˚C 50˚C 25˚C T = 150˚CJ 100 1000 10000 0 5 10 15 20 25 30 35 T = 25˚CJ 0.01 0.1 Single Pulse (Thermal Resistance) D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 Notes: 1. Duty factor D = t1/ t 2 2. Peak Tj = Pdmx ZthJC + Tc PDM 100 1000 T = 150˚C T = 125˚C T = 25˚C J J J Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage

STPS30L30CT, STPS30L30CG Bulletin PD-20626 rev. D 01/07 www.irf.com Fig. 7 - Max. Non-Repetitive Surge Current (Per Leg) Fig. 5 - Max. Allowable Case Temperature Vs. Average Forward Current Fig. 6 - Forward Power Loss Charac- teristics (2) Formula used: TC = TJ - Pd x RthJC ; Pd = Forward Power Loss = IF(AV) x VFM @ (IF(AV) / D) (see Fig. 6) Average Forward Current - I F(AV) (A) Allowable Case Temperature (°C) Average Forward Current - I F(AV) (A) Average Power Loss (Watts) Square Wave Pulse Duration - t p (microsec) Non-Repetitive Surge Current - I FSM (A) 0 5 10 15 20 25 DC RMS Limit D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 DC 100 1000 10000 10 100 1000 10000 At Any Rated Load Condition And With Rated Vrrm Applied Following Surge 130 135 140 145 150 0 5 10 15 20 2 5 DC see note (2) Square wave (D = 0.50)

STPS30L30CT, STPS30L30CG Bulletin PD-20626 rev. D 01/07 www.irf.com Outline Table Conform to JEDEC outline D2Pak (SMD-220) Dimensions in millimeters and (inches) Conform to JEDEC outline TO-220AB Dimensions in millimeters and (inches)

STPS30L30CT, STPS30L30CG Bulletin PD-20626 rev. D 01/07 www.irf.com LOT CODE ASSEMBLY LOGO RECTIFIER INTERNATIONAL PART NUMBER LINE C YEAR 3 = 2003 WEEK 19 DATE CODE EXAMPLE: IN THE ASSEMBLY LINE "C" THIS IS A STPS30L30CT ASSEMBLED ON WW 19, 2003 LOT CODE 1789 ASSEMBLED ON WW 02, 2000 LOT CODE 8024 LOT CODE ASSEMBLY LOGO INTERNATIONAL RECTIFIER YEAR 0 = 2000 DATE CODE WEEK 02 LINE C PART NUMBER THIS IS A STPS30L30CG STPS30L30CG Part Marking Information D2Pak Dimensions in millimeters and (inches) Tape & Reel Information TO-220AB

STPS30L30CT, STPS30L30CG Bulletin PD-20626 rev. D 01/07 www.irf.com 30L30CT This model has been developed by Wizard SPICE MODEL GENERATOR (1999) (International Rectifier Corporation) contains Proprietary Information SPICE Model Diode is composed by a simple diode plus paralled VCG2T .SUBCKT 30l30ct ANO CAT D1 ANO 1 DMOD (0.08936) *Define diode model .MODEL DMOD D(IS=3.01789428908089E-04A,N=1.12506549677918,BV=35V, + IBV=0.40837541124234A,RS= 0.000285952,CJO=3.65460570356249E-08, + VJ=0.934944724736772,XTI=2, EG=0.674450307828855) *Implementation of VCG2T VX 1 2 DC 0V R1 2 CAT TRES 1E-6 .MODEL TRES RES(R=1,TC1=11.2856367229303) GP1 ANO CAT VALUE={-ABS(I(VX))*(EXP((((-2.138249E-03/11.28564)*((V(2,CAT)*1E6)/(I(VX)+1E-6)- 1))+1)*9.434315E-02*ABS(V(ANO,CAT)))-1)} .ENDS 30l30ct Thermal Model Subcircuit .SUBCKT 30L30CT 5 1 CTHERM1 5 4 3.53E-1 CTHERM2 4 3 6.35E0 CTHERM3 3 2 5.15E+1 CTHERM4 2 1 4.08E+3 RTHERM1 5 4 3.15E-1 RTHERM2 4 3 6.15E-1 RTHERM1 3 2 3.7E-1 RTHERM1 2 1 1.98E-1 .ENDS 30L30CT

STPS30L30CT, STPS30L30CG Bulletin PD-20626 rev. D 01/07 www.irf.com Ordering Information Table Device Code 1 524 3 1 - Essential Part Number 2 - Current Rating (30A) 3 - L = Low Voltage 4 - Voltage Rating (30 = 30V) 5 - C =Common cathode 6 - y G = D2Pak package y T = TO-220 7 - y none = Tube (50 pieces) y TRL = Tape & Reel (Left Oriented - for D 2Pak only) y TRR = Tape & Reel (Right Oriented - for D 2Pak only) 8 - y none = Standard Production y PbF = Lead-Free (for D 2Pak tube) y P = Lead-Free (for D 2Pak TRR and TRL) STPS 30 L 30 C G TRL - 6 7 8 IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 01/07 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site.