SPT300PFB SPI | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 1
Technical content
Features
- Complied with AT standard
- Active Power Factor Correction (PFC) meet EN61000-3-2
- High efficiency and reliability
- Compatible with European Union Directive 2002/95/EC (Restriction on Hazardous Substances).
- Remote ON/OFF function
- Internal 12V DC fan included
- Low noise and ripple
- Output over voltage, short circuit, and over current protection
- 100% Hi-pot, ATE, and burn-in tested
- Re-settabl ower shut down Specification
- Temperature Range: Operating: -30°C ~ +50°C; storage & shipping: -20°C ~ +80°C
- Humidity: 5 ~ 95% on operating, 5 ~ 95% on storage
- Dielectric Withstand: Primary frame ground 1800V AC for 1 second
- Efficiency: 75% minimum, typical up to 80%
- Rise time: Less than 20ms
- Hold-up Time: 17ms minimum at nominal input voltage
- Power Good Signal: Power on delay time 100 ~ 500ms, off delay 1ms minimum (TTL and CMOS compatible)
- Leakage Current: Less than 3.5mA at 264Vac,50Hz
- MTBF: 100,000 hours on maximum load at +25°C
- Dimensions (LxWxH): 140x150x86mm /5.5x5.9x3.4inch e p
- Complies with FCC part 15 subpart J class B 115Vac operation, and CISPR 22 class B at 230Vac operation
- Approved y UL,CSA22.2 NO or CUL 60950-1, TUV or VDE, EMC,FCC ,CE, CB report. b Output Characteristics Output Voltage Minimum Load Normal Load Maximum Load Load Reg. Ripple & Noise +5V 2.0A 20A 40A ± 5% 50mV P-P +12V 1.0A 7.5A 15A ± 5% 120mV P-P -5V 0.0A 0.15A 0.3A ± 10% 50mV P-P -12V 0.0A 0.4A 0.8A ± 10% 120mV P-P *+5V and +12V total output not exceed 290W * Total output for this subject power supply is 300W Sparkle Power Inc. Main Office
1000 Rock Avenue
San Jose, CA 95131 TEL: 408-519-8888 FAX: 408-519-9999 E-MAIL: info@sparklepower.com Sparkle Power Inc. Los Angeles Office
17071 Green Drive
City of Industry, CA 91745 TEL: 626-839-7180 FAX: 626-839-3395