SPS-2340MWG

SPS-2340MWG_15 OPTOWAY | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

OPTOWAY TECHNOLOGY INC. No .3 8, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 SPS-2340MWG / SPS-2340BMWG / SPS-2340AMWG (RoHS Compliant) 40km / 1550 nm / 10G Multirate Digital Diagnostic SFP+ LC SINGLE-MODE TRANSCEIVER

FEATURES

/circle6 Support 9.95 Gbps to 11.1Gbps /circle6 Complaint with SFP+ MSA /circle6 Compliant to IEEE 802.3ae 10GBASE-ER /circle6 Compliant with OC-192 IR-2 / SDH STM S-64.2b /circle6 SFF-8472 Digital Diagnostic Function /circle6 Temperature-stabilized 1550 nm EML Transmitter /circle6 Distance up to 40 km at SM Fiber /circle6 AC/AC Coupling according to MSA /circle6 Single +3.3 V Power Supply /circle6 Low Power consumption (max. 1.5W) /circle6 RoHS 6/6 Compliant /circle6 0 to 70 oC Operating: SPS-2340MWG /circle6 -5 to 85 oC Operating: SPS-2340BMWG /circle6 -40 to 85 oC Operating: SPS-2340AMWG /circle6 Class 1 Laser International Safety Standard IEC-60825 Compliant

APPLICATIONS

/circle6 SONET OC-192 IR-2 SDH STM S-64.2b SONET OC-192 IR-3 SDH STM S-64.3b ITU-T G.709 /circle6 10GBASE-ER / EW /circle6 40 km 10G Fibre Channel

DESCRIPTION

The SPS-2340MWG series single mode transceiver is small form factor pluggable module for bi-directional ser ial optical data communications such as SONET OC-192 / SDH STM-64, 10G Ethernet 10GBASE-ER/EW and 10G Fibre Channel. It is with the SFP+ 20-pin connecto r to allow hot plug capability. Digital diagnostic funct ions are available via an I 2C. This module is designed for single mode fiber and operates at a nominal wavelength of 1550 nm. The transmitter section uses a temperature-s tabilized 1550 nm electrical-modulated laser (EML) and is a c lass 1 laser compliant according to International Safety S tandard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical h eader and a limiting post-amplifier IC. LASER SAFETY This single mode transceiver is a Class 1 laser pro duct. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within t he specified temperature and voltage limits. The optic al ports of the module shall be terminated with an optical connector or with a dust plug. ORDER INFORMATION P/No. Bit Rate (Gb/s) 10G Distance (km) Wavelength (nm) Package Temp. (oC) RoHS Compliant SPS-2340MWG 9.95 to 11.3 Multirate* 40 1550 EML SFP+ with DMI 0 to 70 Yes SPS-2340BMWG 9.95 to 11.3 Multirate* 40 1550 EML SFP+ with DMI -5 to 85 Yes SPS-2340AMWG 9.95 to 11.3 Multirate* 40 1550 EML SFP+ with DMI -40 to 85 Yes *: multirate for SONET OC-192 IR2, OC-192 IR-3, 10GBASE-ER/EW, 10G Fibre Channel, ITU-T G.709, 10GBASE-ER/EW + FEC Absolute Maximum Ratings Parameter Symbol Min Max Units Notes Storage Temperature Tstg -40 85 oC Relative Humidity RH 5 85 % Non-condensing 0 70 SPS-2340MWG -5 85 SPS-2340BMWG Operating Case Temperature Topr -40 85 oC SPS-2340AMWG Power Supply Voltage Vcc -0.5 3.6 V Receiver Input Optical Power Mip 3 dBm Average pow er

OPTOWAY TECHNOLOGY INC. No .3 8, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 Recommended Operating Conditions Parameter Symbol Min Typ Max Units / Notes Power Supply Voltage Vcc 3.135 3.3 3.465 V 0 70 oC / SPS-2340MWG -5 85 oC / SPS-2340BMWG Operating Case Temperature Topr -40 85 oC / SPS-2340AMWG Relative Humidity RH 5 85 % Non-condensing 320 500 mA / SPS-2340MWG Power Supply Current I CC (TX+RX) 320 650 mA / SPS-2340A(B)MWG Data Rate 9.95 / 10.3 11.3 Gb/s Transmitter Optical Specifications (0oC < Topr < 70 oC, 3.13V < Vcc < 3.47V) Parameter Symbol Min Typ Max Units Notes Average Launch Power Po, Avg -1 +2 dBm 1 Output Center Wavelength λ c 1530 1565 nm Output Spectrum Width σλ 1 nm -20 dB width Side Mode Suppression Ratio SMSR 30 dB Extinction Ratio ER 8.2 Relative Intensity Noise RIN -128 dB/Hz Average Launch Power of OFF Transmitter -30 dBm 1. Output power is power coupled into a 9/125 µ m single-mode fiber. Receiver Optical Specifications (0oC < Topr < 70 oC, 3.13V < Vcc < 3.47V) Parameter Symbol Min Typ Max Units Notes S Sensitivity @ 9.95 to 10.7 Gb/s Sen1 -16 dBm 2 Receiver Overload P MAX -1 --- dBm LOS -- Deasserted LOS D --- --- -18 dBm Transition: low to high LOS -- Asserted LOS A -28 --- --- dBm Transition: high to low Wavelength of Operation λ c 1530 1565 nm 2. Averaged power; BER < 10 -12 and PRBS 2 31 -1.

Electrical Characteristics

Parameter Symbol Min Typ Max Units Notes High-Speed Signal (CML) Interface Specification Input Data Rate 9.95 / 10.3 11.3 Gb/s Differential Input Impedance Rin 100 Ω Differential Data Input Amplitude 120 820 mVpp Internally AC coupled Output Data Rate 9.95 / 10.3 11.3 Gb/s Differential Output Impedance Rout 100 Ω Differential Data Output Amplitude 340 850 mVpp Internally AC coupled Low-Speed Signal (LVTTL) Interface Specification Input High Voltage 2.0 Vcc+0.3 V Input Low Voltage GND 0.8 V Output High Voltage 2.4 Vcc V Output Low Voltage GND 0.5 V

OPTOWAY TECHNOLOGY INC. No .3 8, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 CONNECTION DIAGRAM PIN Signal Name Description PIN Signal Name Description

1 V EE T Transmitter Signal Ground 11 VEE R Receiver Signal Ground

2 TX_Fault Transmitter Fault Indication. Logic “1” Output = Laser Fault. Logic “0” Output = Normal Operation

12 RD- Inverse Receiver Data Out

3 TX_Disable Logic “1” Inp ut (or no connection) = Laser off,

Logic “0” = Laser on.

13 RD+ Receiver Data Out

4 SDA Modulation Definition 2 – Two wires serial ID

14 VEE R Receiver Signal Ground

5 SDL Modulation Definition 1 – Two wires serial ID

15 VCC R Receiver Power – 3.3V±5% 6 MOD-ABS Modulation Definition 0 – Ground in Modul e 16 VCC T Transmitter Power – 3.3V±5% 7 RS0 RX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance.

17 VEE T Transmitter Signal Ground

8 RX_LOS Loss of Signal Out (OC). 18 TD+ Transmitter Data In 9 RS1 TX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance.

19 TD- Inverse Transmitter Data In

10 VEE R Receiver Signal Ground 20 VEE T Transmitter Signal Ground

Module Definition PIN 4 PIN 5 PIN 6 Interpretation by Host

4 SDA SCL MOD-ABS Serial module definition

Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SDA and SDL appear as no connector (NC) and MOD-ABS is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E 2PROM protocol of the ATMEL AT24C01A/02/04 family of components.

OPTOWAY TECHNOLOGY INC. No .3 8, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 RECOMMENDED CIRCUIT SCHEMATIC 0.1 µF 22 µF 0.1 µF 22 µF Vee R POST Amp LD D river Z=50 Ω Z=50 Ω Z=50 Ω Z=50 Ω Vee T 4 .7 µH 4 .7 µH TD - TD + Vcc T Vcc R RD - RD + 10 0 Ω SFP+ module SerDes 10 0 Ω LOS RD - RD + TD - TD + 0.1 µF Protocol EEPROM MO DUL E DETECT SCL SDA LOSS O F SINGA L Tx_ DISA BLE Tx_ FA ULT MOD_A BS SCL SDA

10 K Ω 10 K Ω 10 K Ω

10 K Ω

Tx_ FA ULT Tx_ DISA BLE (1 ,1 7,20) (1 0,11,14) Vcc 3 .3V Vcc 3 .3V IC IC depending on SE R D E S 0.1 µF

30 K Ω

9 TX Rate Se le ct

Note: Specifications subject to change without notice.

OPTOWAY TECHNOLOGY INC. No .3 8, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737

REVISION HISTORY

Version Subject Release Date

1.0 Initial datasheet 2010/4/1

2.0 1) Add SPS-2340BMWG for extended temperature ve rsion 2) Add SPS-2340AMWG for industrial temperature version 2010/12/1 3.0 Extended speed to 11.3 Gb/s 2011/7/1