SPS-2310-CXX0G OPTOWAY | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 5
Technical content
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 SPS-2310-CXX0G (RoHS Compliant) 3.3V / CWDM / 10.3 Gbps LC SFP+ SINGLE-MODE TRANSCEIVER
FEATURES
l Up to 10.5 Gb/s Bi-directional Data Links l Complaint to SFP+ MSA l Compliant to IEEE 802.3ae 10GBASE l Maximum Link Length of 10 km at 10.3125Gb/s l Uncooled 18-Wavelength CWDM DFB LD: from 1270 nm to 1610 nm l Power Budget > 11 dB l AC/AC Coupling according to MSA l Single +3.3 V Power Supply l RoHS 6/6 Compliant l 0 to 70oC Operating l Class 1 Laser International Safety Standard IEC-60825 Compliant
APPLICATIONS
l High-speed Storage Area Networks l Computer Cluster Cross-connect l Custom High-speed Data Pipes
DESCRIPTION
The SPS-2310-CXX0G series single mode transceiver is small form factor pluggable module for bi-directional serial optical data communications such as IEEE 802.3ae 10GBASE-LR/LW. It is with the SFP 20-pin connector to allow hot plug capability. This module is designed for single mode fiber and operates at a nominal wavelength of CWDM wavelength. There are sixteen center wavelengths available from 1270 nm to 1610 nm, with each step 20 nm. A guaranteed minimum optical link budget of 11 dB is offered. The transmitter section uses a CWDM multiple quantum well DFB laser and is a class 1 laser compliant according to International Safety Standard IEC-60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC-60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. ORDER INFORMATION P/No. Bit Rate (Gb/s) 10GBASE Power Budget (dB) Wavelength (nm) Package Temp. (oC) RoHS Compliant SPS-2310-CXX0G 10.3 LR / LW > 11 CWDM* LC SFP+ 0 to 70 Yes CWDM* Wavelength (0 to 70oC) Central Wavelength Min. (nm) Typ. (nm) Max. (nm) Clasp Color Code Central Wavelength Min. (nm) Typ. (nm) Max. (nm) Clasp Color Code -C270 1264.5 1270 1277.5 Light Purple -C450 1444.5 1450 1457.5 Yellow Orange -C290 1284.5 1290 1297.5 Sky Blue -C470 1464.5 1470 1477.5 Gray -C310 1304.5 1310 1317.5 Yellow Green -C490 1484.5 1490 1497.5 Violet -C330 1324.5 1330 1337.5 Yellow Ocher -C510 1504.5 1510 1517.5 Blue -C350 1344.5 1350 1357.5 Pink -C530 1524.5 1530 1537.5 Green -C370 1364.5 1370 1377.5 Beige -C550 1544.5 1550 1557.5 Yellow -C390 1384.5 1390 1397.5 White -C570 1564.5 1570 1577.5 Orange -C410 1404.5 1410 1417.5 Silver -C590 1584.5 1590 1597.5 Red -C430 1424.5 1430 1437.5 Black -C610 1604.5 1610 1617.5 Brown CWDM*: 18 Wavelengths from 1270 nm to 1610 nm, each step 20 nm.
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 Absolute Maximum Ratings Parameter Symbol Min Max Units Notes Storage Temperature Tstg -40 85 oC Operating Case Temperature Topr 0 70 oC Power Supply Voltage Vcc -0.5 3.6 V Recommended Operating Conditions Parameter Symbol Min Typ Max Units / Notes Power Supply Voltage Vcc 3.13 3.3 3.47 V Operating Case Temperature Topr 0 70 oC Power Supply Current ICC (TX+RX) 300 350 mA Data Rate 10.3125 10.5 Gb/s Transmitter Optical Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V) Parameter Symbol Min Typ Max Units Notes Average Launch Power Po, AVG -3 1 dBm 1 Output Center Wavelength λ λc –5.5 λc λc +7.5 nm 2 Output Spectrum Width Δλ --- 1 nm -20 dB width Side Mode Suppression Ratio SMSR 30 dB Relative Intensity Noise RIN -128 dB/Hz Average Launch Power of OFF Transmitter -30 dBm 1. Output power is power coupled into a 9/125 µm single-mode fiber. 2. ITU-T G.694.2 CWDM wavelength from 1270 nm to 1610 nm, each step 20 nm. Receiver Optical Specifications (0oC < Topr < 70oC, 3.13V < Vcc < 3.47V) Parameter Symbol Min Typ Max Units Notes Sensitivity -14.4 dBm 3 Receiver Overload PMAX 0.5 --- dBm LOS -- Deasserted LOSD --- --- -18 dBm Transition: low to high LOS -- Asserted LOSA -30 --- --- dBm Transition: high to low Wavelength of Operation λc 1260 1620 nm 3. Measured with average power; BER < 10-12 and PRBS 231-1.
Electrical Characteristics
Parameter Symbol Min Typ Max Units Notes High-Speed Signal (CML) Interface Specification Input Data Rate 10.3125 Gb/s TX Clock Tolerance ±100 ppm 4 Differential Input Impedance Rin 100 Ω Differential Data Input Amplitude 150 1200 mVpp Internally AC coupled Output Data Rate 10.3125 Gb/s RX Clock Tolerance ±100 ppm 4 Differential Output Impedance Rout 100 Ω Differential Data Output Amplitude 350 600 700 mVpp Internally AC coupled Low-Speed Signal (LVTTL) Interface Specification Input High Voltage 2.0 Vcc+0.3 V Input Low Voltage GND 0.8 V Output High Voltage 2.4 Vcc V Output Low Voltage GND 0.5 V
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 CONNECTION DIAGRAM PIN Signal Name Description PIN Signal Name Description
1 VEET Transmitter Signal Ground 11 VEER Receiver Signal Ground
2 TX_Fault Transmitter Fault Indication. Logic “1” Output = Laser Fault. Logic “0” Output = Normal Operation
12 RD- Inverse Receiver Data Out
3 TX_Disable Logic “1” Input (or no connection) = Laser off,
Logic “0” = Laser on.
13 RD+ Receiver Data Out
4 SDA Modulation Definition 2 – Two wires serial ID
14 VEER Receiver Signal Ground
5 SDL Modulation Definition 1 – Two wires serial ID
15 VCCR Receiver Power – 3.3V±5% 6 MOD-ABS Modulation Definition 0 – Ground in Module 16 VCCT Transmitter Power – 3.3V±5% 7 RS0 RX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground. A signal on this pin will not affect module performance.
17 VEET Transmitter Signal Ground
8 RX_LOS Loss of Signal Out (OC). 18 TD+ Transmitter Data In 9 RS1 TX Rate Select (LVTTL). This pin has an internal 30k pulldown to ground . A signal on this pin will not affect module performance.
19 TD- Inverse Transmitter Data In
10 VEER Receiver Signal Ground 20 VEET Transmitter Signal Ground
Module Definition PIN 4 PIN 5 PIN 6 Interpretation by Host
4 SDA SCL MOD-ABS Serial module definition
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, SDA and SDL appear as no connector (NC) and MOD-ABS is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 RECOMMENDED CIRCUIT SCHEMATIC 0.1μF 22 μF 0.1μF 22 μF Vee R POST Amp LD Driver Z=50Ω Z=50Ω Z=50Ω Z=50Ω Vee T 4 .7 μH 4 .7 μH TD - TD + Vcc T Vcc R RD - RD + 100Ω SFP+ module SerDes 100Ω LOS RD - RD + TD - TD + 0.1μF Protocol EEPROM MODULE DETECT SCL SDA LOSS OF SINGAL Tx_DISABLE Tx_FAULT MOD_ABS SCL SDA
10 KΩ 10 KΩ 10 KΩ
10 KΩ Tx_FAULT Tx_DISABLE (1,17,20) (10,11,14) 10 KΩ Vcc 3.3V Vcc 3.3V IC IC depending on SERDES 0.1μF 30KΩ 30KΩ RS1 RS0 7
9 TX Rate Select
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737
REVISION HISTORY
Version Subject Release Date
1.0 Initial datasheet 2008/7/1
Note: Specifications subject to change without notice.