SPP-10E-LR-IDFF SOURCE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 7
Technical content
Features
Support 10GBASE-LR/LW and CPRI wireless application Up to 10km transmission on SMF 1310nm DFB laser and PIN receiver SFI high speed electrical interface 2-wire interface with integrated Digital Diagnostic monitoring SFP+ MSA package with duplex LC connector Single +3.3V power supply Power consumption less than 1.0 W Operating case temperature: -40~+85°C Regulatory Compliance Table 1 - Regulatory Compliance Feature Standard Performance Electrostatic Discharge (ESD) to the Electrical Pins MIL-STD-883E Method 3015.7 Class 1(> 1000V for SFI pins, >2000V for other pins.) Electrostatic Discharge (ESD) to the Duplex LC Receptacle IEC 61000-4-2 GR-1089-CORE Compatible with standards Electromagnetic Interference (EMI) FCC Part 15 Class B EN55022 Class B (CISPR 22B) VCCI Class B Compatible with standards Immunity IEC 61000-4-3 Compatible with standards Laser Eye Safety FDA 21CFR 1040.10 and 1040.11 EN60950, EN (IEC) 60825-1,2 Compatible with Class I laser product. RoHS 2011/65/EU Compliant with standards
Table 2 - Absolute Maximum Ratings Parameter Symbol Min. Typical Max. Unit Notes Storage Temperature TS -40 - +85 °C Supply Voltage VCC -0.5 - +4.0 V Operating Relative Humidity RH - - +85 % Recommended Operating Conditions Table 3 – Recommended Operating Conditions Parameter Symbol Min. Typical Max. Unit Notes Operating Case Temperature TC -40 - +85 °C Power Supply Voltage VCC 3.14 3.3 3.47 V Power Supply Current ICC - - 290 mA Power Dissipation PD - - 1.0 W Bit Rate BR - 10.3125 - Gbps Transmission Distance TD 2 - 10,000 m 1 Note 1: Measured with SMF. Optical Characteristics Table 4 – Optical Characteristics Transmitter Parameter Symbol Min. Typical Max. Unit Notes Center Wavelength Range λC 1260 - 1355 nm Average Output Power P0UT -8.2 - 0.5 dBm 1 Optical Modulation Amplitude OMA -5.2 - - dBm 1 Average Output Power (Laser Off) P0UT-OFF - - -30 dBm 1 Side Mode Suppression Ratio SMSR 30 - - dB Extinction Ratio ER 3.5 - - dB 2 Transmitter and Dispersion Penalty TDP - - 3.2 dB Optical Return Loss Tolerance ORLT - - 12 dB Optical Eye Mask Compliant with IEEE 802.3-2008 2 Receiver Center Wavelength Range λC 1260 - 1355 nm Receiver Sensitivity PIN-SENS - - -14.4 dBm 3 Receiver Sensitivity in OMA PIN-SENS(OMA) - - -12.6 dBm 3
Receiver Overload PIN-OL 0.5 - - dBm 3 Receiver Reflectance Ref - - -12 dB LOS Assert LOSA -25 - - dBm LOS Deassert LOSD - - -15 dBm LOS Hysteresis LOSH 0.5 - - dB Notes: 1. The optical power is launched into SMF. 2. Measured with a PRBS 231-1 test pattern @10.3125Gbps. 3. Measured with a PRBS 231-1 test pattern @10.3125Gbps, BER≤10-12.
Electrical Characteristics
Table 5 – Electrical Characteristics Transmitter Parameter Symbol Min. Typical Max. Unit Notes Differential Data Input Amplitude VIN,P-P 180 - 700 mVpp Input Differential Impedance ZIN 85 100 115 Ω Tx_Fault Normal Operation VOL -0.3 - 0.4 V Transmitter Fault VOH 2.4 - VCC V Tx_Disable Normal Operation VIL -0.3 - 0.8 V Laser Disable VIH 2.0 - VCC+0.3 V Receiver Differential Data Output Amplitude VOUT,P-P 300 - 850 mVpp Output Differential Impedance ZO 80 100 120 Ω Rx_LOS Normal Operation VOL -0.3 - 0.4 V Lose Signal VOH 2.4 - VCC V
Figure 3, Pin View Table 6–Pin Function Definitions Pin Logic Symbol Name/Description Note
1 VEET Module Transmitter Ground 1
2 LVTTL-O TX_FAULT Module Transmitter Fault 2
3 LVTTL-I TX_DISABLE Transmitter Disable; Turns off transmitter laser output 3
4 LVTTL-I/O SDL 2-Wire Serial Interface Data Line (MOD-DEF2)
5 LVTTL-I/O SCL 2-Wire Serial Interface Clock (MOD-DEF1)
6 MOD_ABS Module Absent, connected to VEET or VEER in the module 2
7 LVTTL-I RS0 Rate Select 0, NOT implement 4
8 LVTTL-O RX_LOS
Receiver Loss of Signal Indication (in FC designated as RX_LOS, in SONET designat ed as LOS, and in Ethernet designated as NOT Signal Detect)
9 LVTTL-I RS1 Rate Select 1, NOT implement 4
10 VEER Module Receiver Ground 1
11 VEER Module Receiver Ground 1
12 CML-O RD- Receiver Inverted Data Output
13 CML-O RD+ Receiver Non-Inverted Data Output
14 VEER Module Receiver Ground 1
15 VCCR Module Receiver 3.3 V Supply 16 VCCT Module Transmitter 3.3 V Supply
17 VEET Module Transmitter Ground 1
18 CML-I TD+ Transmitter Non-Inverted Data Input
19 CML-I TD- Transmitter Inverted Data Input
20 VEET Module Transmitter Ground 1
Notes: 1. The module ground pins are isolated from the module case. 3. The pin is pulled up to VCCT with a 4.7K-10KΩ resistor in the module. 4. The pins are pulled low to VEET with a >30kΩ resistor in the module. Mechanical Diagram Figure 4, Mechanical Diagram of SFP+ Order Information Table 7 – Order Information Part No. Application Data Rate Laser Source Fiber Type SPP-10E-LR-IDFF CPRI 10GBASE-LR/LW 10.3125G 1310nm DFB SMF
Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation. Legal Notice IMPORTANT NOTICE! All information contained in this document is subject to change without notice, at Source Photonics’s sole and absolute discretion. Source Photonics warrants performance of its products to current specifications only in accordance with the company’s standard one -year warranty; however, specifications designated as “preliminary” are given to describe components only, and Source Photonics expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, wa rranties of merchantability, fitness for a particular purpose, and non -infringement of proprietary rights. Please refer to the company’s Terms and Conditions of Sale for further warranty information. Source Photonics assumes no liability for applications assistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and Source Photonics makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in implantation or other life s upport applications where malfunction may result in injury or death to persons. Source Photonics customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify Source Photonics for any damag es resulting from such use or sale. THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that Source Photonics is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly f rom any use of the information contained in this document. Customer must contact Source Photonics to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. Contact U.S.A. Headquarters
20550 Nordhoff Street
Chatsworth, CA 91311 USA Tel: +1-818-773-9044 Fax: +1-818-773-0261 China Building #2&5, West Export Processing Zone No. 8 Kexin Road, Hi-Tech Zone Chengdu, 611731, China Tel: +86-28-8795-8788 Fax: +86-28-8795-8789 Taiwan 9F, No 81, Shui Lee Rd. Hsinchu, Taiwan, R.O.C. Tel: +886-3-5169222 Fax: +886-3-5169213 © Copyright Source Photonics, Inc. 2007~2013 All rights reserved