SPN75-05S VOLGEN | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

FEATURES

EELLEECCTTRRIICCAALL SSPPEECCIIFFIICCAATTIIOONNSSEELLEECCTTRRIICCAALL SSPPEECCIIFFIICCAATTIIOONNSS All specifications are typical at nominal input, full load. IINNPPUUTT SSPPEECCIIFFIICCAATTIIOONNSSIINNPPUUTT SSPPEECCIIFFIICCAATTIIOONNSS Isolation Voltage GGEENNEERRAALL SSPPEECCIIFFIICCAATTIIOONNSSGGEENNEERRAALL SSPPEECCIIFFIICCAATTIIOONNSS Metal Enclosed - Terminal Block PPHHYYSSIICCAALL SSPPEECCIIFFIICCAATTIIOONNSSPPHHYYSSIICCAALL SSPPEECCIIFFIICCAATTIIOONNSS (3 directions each 3 times) Vibration: 10 ~ 55Hz EENNVVIIRROONNMMEENNTTAALL SSPPEECCIIFFIICCAATTIIOONNSSEENNVVIIRROONNMMEENNTTAALL SSPPEECCIIFFIICCAATTIIOONNSS max. Leakage Current OOUUTTPPUUTT SSPPEECCIIFFIICCAATTIIOONNSSOOUUTTPPUUTT SSPPEECCIIFFIICCAATTIIOONNSS SSAAFFEETTIIEESS // EEMMIISSAAFFEETTIIEESS // EEMMII SPN75SPN75 POWER FACTOR CORRECTED UNIVERSAL INPUT (AC85-264V) OVERVOLTAGE PROTECTION OVERCURRENT PROTECTION LIGHTWEIGHT CONSTRUCTION METAL CHASSIS WITH COVER COMPACT, LOW-PROFILE PACKAGES

3 YEAR WARRANTY

75 W75 W AA TT , Universal Input TT , Universal Input

Fully Enclosed Switching Power SupplyFully Enclosed Switching Power Supply FCC-B EN 55022-B VCCI-II

5 VDC

12 VDC

15 VDC

24 VDC

48 VDC

85 ~ 264 VAC 15.0 A 6.5 A 5.2 A 3.2 A 1.6 A EFFICIENCY 100VAC 230VAC 81% 86% 87% 87% 87% 78% 82% 83% 83% 83% LINE REGULATION (MV) MAX 10 mVmax 10 mVmax 10 mVmax 20 mVmax 20 mVmax LOAD REGULATION (mVmax) (0~100% Load) 40 mVmax 20 mVmax 20 mVmax 40 mVmax 40 mVmax SeriesSeries NOTE: All specifications typical and nominal / full load and 25˚C unless otherwise noted. Mounting screw lenght should not exceed 0.31 inches or 8 mm. Avoid sustained operation in overload or dead short conditions. Specifications subject to changes without notice.

  • No. 6-32 mounting holes standard
  • Dimensions in mm
  • Terminal block or “pin” type connector available SPN75 (42.5) (7.5) (147 –0.5) (38.5 –1) (15max) (162 –1) (18) 2-No. 6-32UNC (MOUNTING HOLES) BOTTOM V. ADJ. LED I/O TERMINAL M4 (MOUNTING HOLES) 2-No. 6-32UNC NOTE: *MOUNTING SCREWS NOT TO EXCEED MAX. PENETRATION OF 6mm. *REMOVE SHORT BAR BETWEEN WHEN USE REMOTE SENSING. *TOLERANCE –1mm. *ALL DIMENSIONS IN INCH (mm) INCH (88 –1) 5.7870.295 1.398 4.5081.516 0.709 1.673 3.465 0.591 6.378 (+S) AND (+V) , (-S) AND (-V) SCREW A/C NIN L THREAD HOLE SPN 75 FG