SPMT6678-01 SSDI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

SOLID STATE DEVICES, INC. SPMT6678-01 FEATURES: DATA SHEET #: PM0004B MAXIMUM RATINGS SYMBOL UNITSVALUE Collector - Emitter Voltage V CEO 450 V olts ASPM

90 AMP

450 VOLTS

DESIGNER'S DATA SHEET

14005 Stage Road * Santa Fe Springs, Ca 90670

Phone: (562) 404-4474 * Fax: (562) 404-1773 NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. Collector - Base Voltage V CBO V olts Emitter - Base Voltage V EBO 8 V olts Collector Current I C 90 Amps Base Current I B 20 Amps Thermal Resistance, Junction to Base 1JB oC/W Operating and Storage Temperature T B and TSTG -55 to 150 oC P D W W/ oC 0.25 Total Module Power Dissipation @ TB = 50oC 1/ Power Derating Above 100oC 400 Emitter - Base Avalanche Energy E EBOaval :J52 Emitter - Base Avalanche Power P EBOaval W1 ELECTRICAL SCHEMATIC

  • High Current Switching for Motor Drives and Inverters for Aerospace Applications.
  • Low Saturation Voltage at High Current.
  • Low Mechanical Stress Design.
  • Hermetic Construction for Aerospace Applications.
  • Excellent Thermal Management.
  • Full Power Screened Hermetic Discretes.
  • TX, TXV, and S-Level Screening Available. 525 1/ Subject to SOA Curves. Contact SSDI for Details.

SOLID STATE DEVICES, INC. SPMT6678-01 CASE OUTLINE: ASPM PRELIMINARY mAmps-ICEV Collector Cutoff Current (VCE = 525V , VBE = -2V) -IEBO Emitter Cutoff Current (VEB = 8V) Phone: (562) 404-4474 * Fax: (562) 404-1773 MIN MAX ELECTRICAL CHARACTERISTICS SYMBOL UNITS DC Current Gain (IC = 40A, VBE = -2V) Collector - Emitter Saturation Voltage (IC = 40A, IB = 3.33A) V CE(SAT) H FE *Pulse Test: Pulse Width = 300us, Duty Cycle = 2% TB = 25EC TB = 125EC 2.0 10.0 5.0 mAmps TB = 25EC TB = 85EC TB = -55EC 20.0 18.0 18.0 - 1.0 V olts Base - Emitter Saturation Voltage (IC = 40A, IB = 6.0A) V BE(SAT) - 1.5 V olts Switch Time (VCC = 300V , IC = 40A, IB1 = IB2 = 6A, TB = 85EC) Turn On Time Storage Time Fall Time tON tS tF 1.2 4.0 1.0 :sec Insulation Resistance (All terminals to Base @1000V) R INSUL1 1- G S Tolerances (Unless specified): .XX .XXX ".03 ".010