SPM-5101G OPTOWAY | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 SPM-5101G / SPM-5101BG / SPM-5101AG (RoHS Compliant) 3.3V / 1310 nm / 622 Mbps LC SFP MULTI-MODE TRANSCEIVER

FEATURES

l Hot-Pluggable SFP Footprint LC Optical Transceiver l Small Form-Factor Pluggable (SFP) MSA compatible l 1310 nm Transmitter l 0 to 1000 m Transmission l AC/AC Coupling according to MSA l LV-TTL TX Disable Input Signal l LV-TTL RX Loss of Signal Output l Single +3.3 V Power Supply l RoHS Compliant l 0 to 70oC Operating : SPM-5101G l -10 to 85oC Operating : SPM-5101BG l -40 to 85oC Operating : SPM-5101AG l Class 1 Laser International Safety Standard IEC 60825 Compliant

APPLICATIONS

l SONET / SDH Equipment Interconnect l Fiber Channel Links

DESCRIPTION

The SPM-5101G series is small form factor pluggable module for multi-mode fiber Fast Ethernet and OC-12 / STM-4 SONET / SDH fiber communications. It is with the SFP 20-pin connector to allow hot plug capability. The transmitter section uses a multiple quantum well 1310 nm laser and is a class 1 laser compliant according to International Safety Standard IEC 60825. The receiver section uses an integrated InGaAs detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. LASER SAFETY This multi-mode transceiver is a Class 1 laser product. It complies with IEC 60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. ORDER INFORMATION P/No. Bit Rate (Mb/s) Distance (m) Wavelength (nm) Package Temp. (oC) TX Power (dBm) RX Sens. (dBm) RoHS Compliant SPM-5101G 622 0 to 1000 1310 LC SFP 0 to 70 -12 to -19 -26 Yes SPM-5101BG 622 0 to 1000 1310 LC SFP -10 to 85 -12 to -19 -26 Yes SPM-5101AG 622 0 to 1000 1310 LC SFP -40 to 85 -12 to -19 -26 Yes Absolute Maximum Ratings Parameter Symbol Min Max Units Notes Storage Temperature Tstg -40 85 oC Operating Temperature Topr 0 -10 -40 oC SPM-5101G SPM-5101BG SPM-5101AG Power Supply Voltage Vcc 0 3.6 V Input Voltage --- GND Vcc V Output Current Iout 0 30 mA Recommended Operating Conditions Parameter Symbol Min Typ Max Units / Notes Power Supply Voltage Vcc 3.1 3.3 3. 5 V Power Supply Current ICC (TX+RX) 150 250 mA Operating Temperature Topr 0 -10 -40 oC / SPM-5101G oC / SPM-5101BG oC / SPM-5101AG Data Rate 622 700 Mb/s

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 Transmitter Specifications (0oC < Topr < 70oC, 3.1V < Vcc < 3. 5V) Parameter Symbol Min Typ Max Units Notes Optical Optical Transmit Power Po -19 --- -12 dBm 1 Output Center Wavelength λ 1260 1310 1360 nm Output Spectrum Width Δλ --- --- 10 nm RMS (σ) Extinction Ratio ER 8.2 --- --- dB Optical Rise Time tr 2 ns 10% to 90% Values Optical Fall Time tf 2 ns 10% to 90% Values Relative Intensity Noise RIN -116 dB/Hz Total Jitter TJ 1.0 ns 2 Electrical Data Input Current – Low IIL -350 µA Data Input Current – High IIH 350 µA Differential Input Voltage VIH - VIL 0.5 2.4 V Peak-to-Peak TX Disable Input Voltage – Low TDIS, L 0 0.5 V 3 TX Disable Input Voltage – High TDIS, H 2.0 Vcc V 3 TX Disable Assert Time TASSERT 10 µs TX Disable Deassert Time TDEASSERT 1 ms TX Fault Output Voltage -- Low TFaultL 0 0.5 V 4 TX Fault Output Voltage -- High TFaultH 2.0 Vcc+0.3 V 4 Notes: 1. Output power is power coupled into a 62.5/125 µm multi-mode fiber. 2. Measured with a 27-1 PRBS. 3. There is an internal 4.7K to 10K ohm pull-up resistor to VccTX. 4. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage). Receiver Specifications (0oC < Topr < 70oC, 3.1 V < Vcc < 3. 5V) Parameter Symbol Min Typ Max Units Notes Optical Sensitivity --- --- --- -26 dBm 5 Maximum Input Power Pin -8 --- --- dBm Signal Detect -- Asserted Pa --- --- -26 dBm Transition: low to high Signal Detect -- Deasserted Pd -43 --- --- dBm Transition: high to low Signal detect -- Hysteresis 1.0 --- dB Optical Return Loss ORL 14 dB Wavelength of Operation 1260 1600 nm Electrical Differential Output Voltage VOH – VOL 0.6 2.0 V Output LOS Voltage -- Low VOL 0 0.5 V 6 Output LOS Voltage – High VOH 2.0 Vcc+0.3 V 6 Signal Detect Assert Time ASMAX 100 µs OFF to ON Signal Detect Deassert Time ANSMAX 300 µs ON to OFF Notes: 5. Minimum sensitivity and saturation levels at BER 1E-10 for a 223-1 PRBS. 6. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 CONNECTION DIAGRAM PIN Signal Name Description PIN Signal Name Description

1 TX GND Transmitter Ground 11 RX GND Receiver Ground

2 TX Fault Transmitter Fault Indication 12 RX DATA OUT- Inverse Receiver Data Out

3 TX Disable Transmitter Disable (Module disables

on high or open)

13 RX DATA OUT+ Receiver Data Out

4 MOD-DFE2 Modulation Definition 2 – Two wires

14 RX GND Receiver Ground

5 MOD-DEF1 Modulation Definition 1 – Two wires

15 Vcc RX Receiver Power – 3.3V±5%

6 MOD-DEF0 Modulation Definition 0 – Ground in

16 Vcc TX Transmitter Power – 3.3V±5%

7 N/C Not Connected 17 TX GND Transmitter Ground

8 LOS Loss of Signal 18 TX DATA IN+ Transmitter Data In

9 RX GND Receiver Ground 19 TX DATA IN- Inverse Transmitter Data In

10 RX GND Receiver Ground 20 TX GND Transmitter Ground

Module Definition MOD-DEF2 PIN 4 MOD-DEF1 PIN 5 MOD-DEF0 PIN 6 Interpretation by Host

4 SDA SCL LV-TTL Low Serial module definition

Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector (NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 RECOMMENDED CIRCUIT SCHEMATIC 10nF 10μF 10nF 10μF VeeR POST Amp LD Driver Z=50Ω Z=50Ω Z=50Ω Z=50Ω VeeT 1μH 1μH TD - TD + VccT VccR RD - RD + 100Ω SFP module SerDes 100Ω LOS RD - RD + TD - TD + 10nF 10μF Protocol EEPROM MODULE DETECT SCL SDA LOSS OF SINGAL Tx_DISABLE Tx_FAULT MOD_DEF(0) MOD_DEF(1) MOD_DEF(2) 4.7K to 10KΩ 4.7K to 10KΩ 4.7K to 10KΩ 4.7K to 10KΩ Tx_FAULT Tx_DISABLE (1,17,20) (9,10,11,14) 4.7K to 10KΩ Vcc 3.3V Vcc 3.3V IC IC depending on SERDES PACKAGE DIAGRAM Units in mm