SPL-54B33B-AG

SPL-54B33B-G OPTOWAY | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 SPL-54B33B-G / SPL-54B33B-AG (RoHS Compliant) 3.3V / 622 Mbps 1490 nm Continuous-Mode TX / 155 Mbps 1310 nm Burst-Mode RX ITU-T G.983.3 B-PON CLASS B SFP OLT Transceiver (with Reset-Less RX)

FEATURES

l Class B Optical Line Terminal (OLT) for ITU-T G.983.3 B-PON l SFP SC Transceiver l 622 Mbps / 1490 nm Continuous-Mode Transmitter l 155 Mbps / 1310 nm Burst-Mode Receiver with 2R Output l Resetless BM Receiver Design l BM RX capable of Handling Packet-to-Packet Spacing with Guard Time less than 50 ns for 15dB Packet Optical Power Difference l High Resistance of BM RX to DC Optical Background l 0 to 70oC Operating: SPL-54B33B-G l -20 to 85oC Operating: SPL-54B33B-AG l RoHS Compliant l Single +3.3 V Power Supply l Transmitter: AC Coupling Input l Receiver: DC Coupling Output l Class 1 Laser International Safety Standard IEC 60825 Compliant

APPLICATIONS

DESCRIPTION

SPL-54B33B series is a small form factor pluggable transceiver for ITU-T G.983.3 Class B optical line terminal (OLT) with 622 Mbps/1490 nm in downstream and 155 Mbps /1310 nm in upstream. It is with the SFP 20-pin connector to allow hot plug capability. The SPL-54B33B series is high performance module for single fiber communications by using 1490 nm continuous-mode transmitter and 1310 nm burst-mode receiver. The transmitter section uses a multiple quantum well 1490 nm DFB laser and is a class 1 laser compliant according to International Safety Standard IEC 60825. The receiver section uses an integrated 1310 nm burst-mode detector preamplifier (IDP) mounted in an optical header and a burst-mode limiting post-amplifier IC. Unlike the conventional BM RX, the RX does not requires reset pulse to receive optical data packets with different optical power. LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC 60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. ORDER INFORMATION TX RX P/No Class Type Speed (Mb/s) λ (nm) Power (dBm) Type Speed (Mb/s) λ (nm) Sens. (dBm) Temp (oC) Package RoHS Compliant SPL-54B33B-G B CNT 622 1490 DFB 4 / -1 BM, 2R 155 1310 -8 / -31 0 / 70 SC SFP Yes SPL-54B33B-AG B CNT 622 1490 DFB 4 / -1 BM, 2R 155 1310 -8 / -31 -20 / 85 SC SFP Yes Absolute Maximum Ratings Parameter Symbol Min Max Units Notes Storage Temperature Tstg -40 85 oC Operating Case Temperature Topr 0 -20 oC SPL-54B33B-G SPL-54B33B-AG Power Supply Voltage Vcc -0.5 3.6 V Recommended Operating Conditions Parameter Symbol Min Max. Unit Units / Notes Power Supply Voltage Vcc 3.13 3.47 V V Operating Case Temperature Topr 0 -20 oC SPL-54B33B-G SPL-54B33B-AG Power Supply Current ICC (TX+RX) 300 mA

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 Transmitter Specifications ( 0oC < Topr < 70oC, 3.13V < Vcc < 3.47V ) Parameter Symbol Min. Typ. Max. Units Notes Optical Optical Transmit Power Po -1 4 dBm 1 Output Center Wavelength λ 1480 1500 nm Output Spectrum Width Δλ 1 nm -20 dB Width Side Mode Suppression Ratio SMSR 30 dB Extinction Ratio ER 10 dB Data Rate 622 Mb/s Optical Rise Time 1.0 ns 10% to 90% Values Optical Fall Time 1.0 ns 10% to 90% Values Relative Intensity Noise RIN -120 dB/Hz Total Jitter 0.55 ns Electrical Data Input Current – Low -350 µA Data Input Current – High 350 µA Differential Input Voltage VIH - VIL 0.4 2.4 V Peak-to-Peak TX Disable Input Voltage – Low TDIS, L 0 0.8 V 2 TX Disable Input Voltage – High TDIS, H 2.0 Vcc V 2 TX Disable Assert Time TASSERT 10 µs TX Disable Deassert Time TDEASSERT 1 ms TX Fault Output Voltage -- Low TFaultL 0 0.5 V 3 TX Fault Output Voltage -- High TFaultH 2.0 Vcc+0.3 V 3 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. There is an internal 4.7K to 10K ohm pull-up resistor to VccTX. 3. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage). Receiver Characteristics ( 0oC < Topr < 70oC, 3.13V < Vcc < 3.47V ) Parameter Symbol Min. Typ. Max. Units Notes Optical Sensitivity Sen -31 dBm 4 Saturation Optical Power Sat -8 dBm 4 Wavelength of Operation 1260 1360 nm 5 Data Rate 155 Mb/s Packet-to-Packet Guard Time tg 50 ns 6,7 DC Optical Tolerance Sen +3 dB Optical Return Loss 14 dB Electrical Data Output Voltage – Low VOL - VCC -2.0 -1.58 V 8 Data Output Voltage – High VOH - VCC -1.1 -0.74 V 8 Signal Detect Output Voltage -- Low VOL 0.5 V Signal Detect Output Voltage -- High VOH 2.0 V Signal Detect Assert Time ASMAX 10 15 30 ns Transition: low to high Signal Detect Deassert Time ANSMAX 500 550 700 ns Transition: high to low Rest Between Packet Resetless 4. Sensitivity and saturation levels at BER 1E-10 for a PRBS 223-1 @ER=10. 5. At least 30 dB optical isolation for the wavelength 1480 to 1500 nm. 6. No reset is needed. 7. The optical power difference between neighboring packets is up to 15 dB at 155 Mbps. 8. These inputs are compatible with 10K, 10KH and 100K ECL and LVPECL outputs.

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 BM CLOCK & DATA RECOVERY OPTICAL PACKET-1 OPTICAL PACKET-2 RECEIVED OPTICAL SIGNAL BM RX OUTPUT BM CDR OUTPUT (SYNC. WITH SYSTEM CLK) SYNC. WITH SYSTEM CLK SYSTEM CLK ZTLT-35L33L-K ZB155CDR BM CDR SYSTEM CLK BM RX OUT RECOVERED DATAOPTICAL INPUT SPL-54B33B ZB155CDR BM CDR

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 CONNECTION DIAGRAM PIN Signal Name Description PIN Signal Name Description

1 TX GND Transmitter Ground 11 RX GND Receiver Ground

2 TX Fault Transmitter Fault Indication 12 RX DATA OUT- Inverse Receiver Data Out

3 TX Disable Transmitter Disable (Module disables on

high or open)

13 RX DATA OUT+ Receiver Data Out

4 MOD-DFE2 Modulation Definition 2 – Two wires

14 RX GND Receiver Ground

5 MOD-DEF1 Modulation Definition 1 – Two wires

15 Vcc RX Receiver Power – 3.3V±5%

6 MOD-DEF0 Modulation Definition 0 – Ground in

16 Vcc TX Transmitter Power – 3.3V±5%

7 N/C Not Connected 17 TX GND Transmitter Ground

8 LOS Loss of Signal 18 TX DATA IN+ Transmitter Data In

9 RX GND Receiver Ground 19 TX DATA IN- Inverse Transmitter Data In

10 RX GND Receiver Ground 20 TX GND Transmitter Ground

Module Definition MOD-DEF2 PIN 4 MOD-DEF1 PIN 5 MOD-DEF0 PIN 6 Interpretation by Host

4 SDA SCL LV-TTL Low Serial module definition

Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector (NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.

OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 RECOMMENDED CIRCUIT SCHEMATIC 10nF 10μF 10nF 10μF VeeR POST Amp LD Driver Z=50Ω Z=50Ω Z=50Ω Z=50Ω VeeT 1μH 1μH TD - TD + VccT VccR RD - RD + 100Ω SFP OLT Module LOS RD - RD + TD - TD + 10nF 10μF EEPROM To I2C Bus Tx_DISABLE Tx_FAULT MOD_DEF(0) MOD_DEF(1) MOD_DEF(2) 4.7K to 10KΩ 4.7K to 10KΩ 4.7K to 10KΩ 4.7K to 10KΩ Tx_FAULT Tx_DISABLE (1,17,20) (9,10,11,14) 4.7K to 10KΩ Vcc 3.3V Vcc 3.3V 82Ω 130Ω 82Ω 130Ω Vcc 3.3V 10nF LOSS OF SINGAL CDR or PHY DEVICE LVPECL LVPECL Vcc 3.3V Vcc 3.3V depending on customer's PHY PACKAGE DIAGRAM Units in mm Note: Specifications subject to change without notice.