SPG1316-H AUK | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 4

Technical content

Features

  • 1.6mm(L)×0.8mm small size surface mount type
  • Thin package of 0.4mm(H) thickness
  • Transparent clear lens optic
  • Low power consumption type chip LED
  • Emitting light green (525nm)

Applications

  • LCD backlighting
  • Keypad backlighting
  • Symbol backlighting
  • Front panel indicator lamp O u t l i n e D i m e n s i o n s u n i t : mm SSeemmiiccoonndduuccttoorr

Characteristic Symbol Ratings Unit Power Dissipation P D 80 mW Forward Current I F 20 mA *1Peak Forward Current I FP 50 mA Reverse Voltage V R 4 V Operating Temperature T opr -25∼80 ℃ Storage Temperature T stg -30∼100 ℃ *2Soldering Temperature T sol 240℃ for 5 seconds *1.Duty ratio = 1/16, Pulse width = 0.1ms *2. Recommended soldering Temperature Profile Preheating area 120 Temp(℃) 220℃ Solder area max. 50sec 1~ 4℃/sec -2~ -6℃/sec 1~4℃/sec Peak time max 10secPeak Temp max 240℃ 140~ 160℃ Time(sec)

Electrical Characteristics

Characteristic Symbol Test Condition Min Typ Max Unit *3Forward Voltage VF I F= 10mA 2.6 3.0 3.6 V *4Luminous Intensity IV IF= 10mA 62 100 228 mcd P eak W avelength λP IF= 10mA - 525 - nm Spectrum Bandwidth Δ λ IF= 10mA - 35 - nm Reverse Current IR VR=4V - - 10 uA X - ±65 - *5Half Angle θ1/2 Y IF= 10mA - ±70 - deg *3. Forward Voltage Maximum tolerance for ±0.1V *4. Luminous Intensity Maximum tolerance for each Grade Classification limit is ±18% (The test result of IF=20mA is only for reference) *5. θ1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity z Iv / VF /λp Grade Classification Test Condition @IF=10mA Forward Voltage(V) Luminous Intensity(mcd) Peak Wavelength(nm) 3 : 2.8~3.0 B : 78~105 A : 515~520 4 : 3.0~3.2 C : 105~140 B : 520~525 5 : 3.2~3.4 D : 140~190 C : 525~530

Fig.4 Spectrum Distribution Fig. 3 IF – Ta Fig. 2 IV - IF Fig. 1 IF - VF Forward Current I F [mA] Ambient Temperature Ta [℃] Relative Intensity [%] Wavelength λ [nm] Forward Voltage VF [V] Forward Current I F [mA] Forward Current IF [mA] Luminous Intensity Iv [mcd] Fig. 5-1 Radiation Diagram(X) Relative Luminous Intensity Iv [%] Fig. 5-2 Radiation Diagram(Y) Relative Luminous Intensity Iv [%]

These AUK products are intended for usage in general electronic equipments(Office and communication equipment, measuring equipment, domestic electrification, etc.). Please make sure that you consult with us before you use these AUK products in equipm- ents which require high quality and/or reliabi lity, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, traffic signal, combustion central, all types of safety device, etc.). AUK cannot accept liability to any damage which may occur in case these AUK products were used in the mentioned equipments without prior consultation with AUK.