SPD3909 SSDI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0114B DOC Solid State Devices, Inc.

14701 Firestone Blvd * La Mirada, Ca 90638

Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com Designer’s Data Sheet Part Number/Ordering Information 1/ Screening 2/ __ = Not Screened TX = TX Level TXV = TXV Level S = S Level Pin Configuration (See Table 1) __ = Normal (Cathode to Stud) R = Reverse (Anode to Stud) Family/Voltage 09 = 50V 10 = 100V 11 = 200V 12 = 300V 13 = 400V SPD3909 Thru SPD3913 30A, 200nsec, 50-400 V Fast Recovery Rectifier Features:

  • Fast Recovery: 200nsec Maximum (100nsec typ.) 3/
  • Low Reverse Leakage Current
  • Single Chip Construction
  • PIV to 400V, Higher Voltages Available
  • Hermetically Sealed Isolated Package
  • High Surge Rating
  • Replacement for 1N3909, 1N3910, 1N3911, 1N3912, and 1N3913
  • TX, TXV, and S-Level Screening Available 2/ Maximum Ratings 4/ Symbol Value Units Peak Repetitive Reverse Voltage SPD3909 SPD3910 SPD3911 SPD3912 SPD3913 V RRM VRWM VR 100 200 300 400 Volts Average Rectified Forward Current (Resistive Load, 60 Hz Sine Wave, TA = 25 °C) Io 30 Amps Peak Surge Current (8.3 ms Pulse, Half Sine Wave, TA = 25 °C, per leg) IFSM 300 Amps Operating & Storage Temperature TOP TSTG -55 to +150 -65 to +175 ºC Maximum Total Thermal Resistance Junction to Case RθJC 1.2 ºC/W Notes: 1/ For ordering information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Recovery Conditions: IF = 500 mA, IR = 1 Amp, IRR = 250 mA. 4/ Unless Otherwise Specified, All Maximum Ratings/Electrical Characteristics @25°C. DO-5:

NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: RC0114B DOC Solid State Devices, Inc. Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SPD3909 Thru SPD3913 Electrical Characteristics (per leg) 4/ Symbol Max Units Maximum Instantaneous Forward Voltage Drop (Pulsed) I F = 30A, TA = 25 ºC IF = 30A, TA = -55 ºC VF1 VF2 1.40

1.50 VDC

Maximum Reverse Leakage Current (Rated VR Minimum) TA = 25 ºC TA = 100 ºC IR1 IR2 μA mA Maximum Reverse Recovery Time F = 500 mA, IR = 1 Amp, IRR = 250 mA) t RR 200 nsec Typical Junction Capacitance (VR = 10VDC, TA = 25ºC, f = 1MHz) C J 200 pF Notes: 1/ For ordering information, Price, Operating Curves, and Availability- Contact Factory. 2/ Screened to MIL-PRF-19500. 3/ Recovery Conditions: I F = 500 mA, IR = 1 Amp, IRR = 250 mA. 4/ Unless Specified Otherwise, All Maximum Ratings/Electrical Characteristics are @25°C. Table 1- PIN ASSIGNMENT Code Configuration Terminal Stud __ Normal Anode Cathode R Reverse Cathode Anode DO-5 Outline (Normal Pin Configuration Shown):