SPD-10S-ER-XXIDFB

SPD-10S-ER-XXIDFB SOURCE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 8

Technical content

Features

 Available in all 100GHz C -Band Wavelengths on the DWDM ITU Grid  Support multi data rate from 6.1G to 10.3G  Up to 25km transmission on SMF  1550nm EML laser and APD receiver  Dual CDR integrated  SFI high speed electrical interface  2-wire interface with integrated Digital Diagnostic monitoring  SFP+ MSA package with duplex LC connector  Single +3.3V power supply  Power consumption less than 2.5W  Operating case temperature: -40~+85°C Regulatory Compliance Table 1 - Regulatory Compliance Feature Standard Performance Electrostatic Discharge (ESD) to the Electrical Pins MIL-STD-883E Method 3015.7 Class 1(> 1000V for SFI pins, >2000V for other pins.) Electrostatic Discharge (ESD) to the Duplex LC Receptacle IEC 61000-4-2 GR-1089-CORE Compatible with standards Electromagnetic Interference (EMI) FCC Part 15 Class B EN55022 Class B (CISPR 22B) VCCI Class B Compatible with standards Immunity IEC 61000-4-3 Compatible with standards Laser Eye Safety FDA 21CFR 1040.10 EN60950, EN (IEC) 60825-1,2 Compatible with Class I laser product. RoHS 2011/65/EU Compliant with standards

Preliminary Datasheet Preliminary D DS-7510 Rev 00 2013-10-11 Preliminary Datasheet SPD-10S-ER-XXIDFB Absolute Maximum Ratings Table 2 - Absolute Maximum Ratings Parameter Symbol Min. Typical Max. Unit Notes Storage Temperature TS -40 - +85 °C Supply Voltage VCC -0.5 - +4.0 V Operating Relative Humidity RH - - +85 % Recommended Operating Conditions Table 3 – Recommended Operating Conditions Parameter Symbol Min. Typical Max. Unit Notes Operating Case Temperature TC -40 - +85 °C Power Supply Voltage VCC 3.14 3.3 3.47 V Power Supply Current ICC - 455 720 mA Power Dissipation PD - 1.5 2.5 W Bit Rate BR 6.1 - 10.3 Gbps Transmission Distance TD 2 - 25,000 m 1 Note 1: Measured with G.652 SMF. Optical Characteristics Table 4 – Optical Characteristics Transmitter Parameter Symbol Min. Typical Max. Unit Notes Center Wavelength Range λC 1529.55 - 1560.61 nm fC 196.0 - 192.1 THz Channel Space f - 100 - GHz Center Wavelength Tolerance λC -100 - 100 pm Average Output Power P0UT 1 1.5 3 dBm 1 Average Output Power (Laser Off) P0UT-OFF - - -35 dBm 1 Side Mode Suppression Ratio SMSR 35 - - dB Spectral Width (-20dB) λ20 - - 0.3 nm Extinction Ratio ER 8.2 - - dB 2 Dispersion Penalty DP - - 2 dB 3 Relative Intensity Noise RIN - - -130 dB/Hz

Preliminary Datasheet Preliminary D DS-7510 Rev 00 2013-10-11 Preliminary Datasheet SPD-10S-ER-XXIDFB Reflectance Tolerance RT - - -27 dB Optical Eye Mask Compliant with ITU-T G.691-2006 2 Receiver Center Wavelength Range λC 1528 - 1565 nm Receiver Sensitivity PIN-SENS - -26 -25 dBm 3, 4 Receiver Overload PIN-OL -7 - - dBm 3 Optical Return Loss ORL - - -27 dB LOS Assert LOSA -38 - - dBm LOS Deassert LOSD - - -28 dBm LOS Hysteresis LOSH 0.5 - 4 dB Notes: 1. The optical power is launched into SMF. 2. Measured with a PRBS 231-1 test pattern @9.9Gbps. 3. Measured with a PRBS 231-1 test pattern, BER≤10-12. 4. We can support -26dBm for BOL, and -25dBm for EOL.

Electrical Characteristics

Table 5 – Electrical Characteristics Transmitter Parameter Symbol Min. Typical Max. Unit Notes Differential Data Input Amplitude VIN,P-P 190 - 700 mVpp Input Differential Impedance ZIN 85 100 115 Ω Tx_Fault Normal Operation VOL -0.3 - 0.4 V Transmitter Fault VOH 2.4 - VCC V Tx_Disable Normal Operation VIL -0.3 - 0.8 V Laser Disable VIH 2.0 - VCC+0.3 V Receiver Differential Data Output Amplitude VOUT,P-P 300 - 850 mVpp Output Differential Impedance ZO 80 100 120 Ω Rx_LOS Normal Operation VOL -0.3 - 0.4 V Lose Signal VOH 2.4 - VCC V

Preliminary Datasheet Preliminary D DS-7510 Rev 00 2013-10-11 Preliminary Datasheet SPD-10S-ER-XXIDFB Pin Definitions Figure 3, Pin View Table 6–Pin Function Definitions Pin Logic Symbol Name/Description Note

1 VEET Module Transmitter Ground 1

2 LVTTL-O TX_FAULT Module Transmitter Fault 2

3 LVTTL-I TX_DISABLE Transmitter Disable; Turns off transmitter laser output 3

4 LVTTL-I/O SDL 2-Wire Serial Interface Data Line (MOD-DEF2)

5 LVTTL-I/O SCL 2-Wire Serial Interface Clock (MOD-DEF1)

6 MOD_ABS Module Absent, connected to VEET or VEER in the module 2

7 LVTTL-I RS0 Rate Select 0, NOT implement 4

8 LVTTL-O RX_LOS

Receiver Loss of Signal Indication (in FC designated as RX_LOS, in SONET designated as LOS, and in Ethernet designated as NOT Signal Detect)

9 LVTTL-I RS1 Rate Select 1, NOT implement 4

10 VEER Module Receiver Ground 1

11 VEER Module Receiver Ground 1

12 CML-O RD- Receiver Inverted Data Output

13 CML-O RD+ Receiver Non-Inverted Data Output

14 VEER Module Receiver Ground 1

15 VCCR Module Receiver 3.3 V Supply 16 VCCT Module Transmitter 3.3 V Supply

17 VEET Module Transmitter Ground 1

18 CML-I TD+ Transmitter Non-Inverted Data Input

19 CML-I TD- Transmitter Inverted Data Input

20 VEET Module Transmitter Ground 1

Preliminary Datasheet Preliminary D DS-7510 Rev 00 2013-10-11 Preliminary Datasheet SPD-10S-ER-XXIDFB Notes: 1. The module ground pins are isolated from the module case. 3. The pin is pulled up to VCCT with a 4.7K-10KΩ resistor in the module. 4. The pins are pulled low to VEET with a >30kΩ resistor in the module. Mechanical Diagram Figure 4, Mechanical Diagram of SFP+ Order Information Table 7 – Order Information Part No. Application Data Rate Laser Source Fiber Type Latch Color SPD-10S-ER-XXIDFB 6G/10G CPRI 6.1~10.3G DWDM EML SMF Red Note: see Table 10 – Wavelength Guide for “xx” value. Table 10 – Wavelength Guide (xx value) ITU Channel (xx) Frequency (THz) Wavelength (nm) ITU Channel (xx) Frequency (THz) Wavelength (nm) 21 192.1 1560.606 41 194.1 1544.526 22 192.2 1559.794 42 194.2 1543.730 23 192.3 1558.983 43 194.3 1542.936 24 192.4 1558.173 44 194.4 1542.142 25 192.5 1557.363 45 194.5 1541.349

Preliminary Datasheet Preliminary D DS-7510 Rev 00 2013-10-11 Preliminary Datasheet SPD-10S-ER-XXIDFB 26 192.6 1556.555 46 194.6 1540.557 27 192.7 1555.747 47 194.7 1539.766 28 192.8 1554.940 48 194.8 1538.976 29 192.9 1554.134 49 194.9 1538.186 30 193.0 1553.329 50 195.0 1537.397 31 193.1 1552.524 51 195.1 1536.609 32 193.2 1551.721 52 195.2 1535.822 33 193.3 1550.918 53 195.3 1535.036 34 193.4 1550.116 54 195.4 1534.250 35 193.5 1549.315 55 195.5 1533.465 36 193.6 1548.515 56 195.6 1532.681 37 193.7 1547.715 57 195.7 1531.898 38 193.8 1546.917 58 195.8 1531.116 39 193.9 1546.119 59 195.9 1530.334 40 194.0 1545.322 60 196.0 1529.553 Warnings Handling Precautions: This device is susceptible to damage as a result of electrostatic discharge (ESD). A static free environment is highly recommended. Follow guidelines according to proper ESD procedures. Laser Safety: Radiation emitted by laser devices can be dangerous to human eyes. Avoid eye exposure to direct or indirect radiation. Legal Notice IMPORTANT NOTICE! All information contained in this document is subject to change without notice, at Source Photonics’s sole and absolute discretion. Source Phot onics warrants performance of its products to current specifications only in accordance with the company’s sta ndard one-year warranty; however, specifications designated as “preliminary” are given to describe components only, and Source Photonics expressly disclaims any and all warranties for said products, including express, implied, and statutory warranties, wa rranties of merchantability, fitness for a particular purpose, and non -infringement of proprietary rights. Please refer to the company’s Terms and Conditions of Sale for further warranty information. Source Photonics assumes no liability for applications a ssistance, customer product design, software performance, or infringement of patents, services, or intellectual property described herein. No license, either express or implied, is granted under any patent right, copyright, or intellectual property right, and Source Photonics makes no representations or warranties that the product(s) described herein are free from patent, copyright, or intellectual property rights. Products described in this document are NOT intended for use in implantation or other life su pport applications where malfunction may result in injury or death to persons. Source Photonics customers using or selling products for use in such applications do so at their own risk and agree to fully defend and indemnify Source Photonics for any damage s resulting from such use or sale.

Preliminary Datasheet Preliminary D DS-7510 Rev 00 2013-10-11 Preliminary Datasheet SPD-10S-ER-XXIDFB THE INFORMATION CONTAINED IN THIS DOCUMENT IS PROVIDED ON AN “AS IS” BASIS. Customer agrees that Source Photonics is not liable for any actual, consequential, exemplary, or other damages arising directly or indirectly fr om any use of the information contained in this document. Customer must contact Source Photonics to obtain the latest version of this publication to verify, before placing any order, that the information contained herein is current. Contact U.S.A. Headquarters

20550 Nordhoff Street

Chatsworth, CA 91311 USA Tel: +1-818-773-9044 Fax: +1-818-773-0261 China Building #2&5, West Export Processing Zone No. 8 Kexin Road, Hi-Tech Zone Chengdu, 611731, China Tel: +86-28-8795-8788 Fax: +86-28-8795-8789 Taiwan 9F, No 81, Shui Lee Rd. Hsinchu, Taiwan, R.O.C. Tel: +886-3-5169222 Fax: +886-3-5169213 © Copyright Source Photonics, Inc. 2007~2013 All rights reserved