SPB-3660G_08 OPTOWAY | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 6
Technical content
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 SPB-3660G / SPB-3660BG / SPB-3660AG (SC BIDI SFP) (RoHS Compliant) SPB-3660LG / SPB-3660BLG / SPB-3660ALG (LC BIDI SFP) 1310 nm TX / 1550 nm RX , 3.3V / 155 Mbps Single-Fiber SFP Transceiver
FEATURES
l 1-Fiber Bi-Directional SFP Optical Transceiver l Compliant with IEEE 802.3ah-2004 100BASE-BX l Simplex SC Connector: SPB-3660G l Simplex LC Connector: SPB-3660LG l 1310 nm LD Transmitter l 1550 nm Receiver l Distance Up to 60 km l AC/AC Coupling according to MSA l Single +3.3 V Power Supply l RoHS Compliant l 0 to 70oC Operating : SPB-3660G l -10 to 85oC Operating : SPB-3660BG l -40 to 85oC Operating : SPB-3660AG l Class 1 Laser International Safety Standard IEC 60825 Compliant
APPLICATIONS
l SONET/SDH Equipment Interconnect l Fibre Channel Links
DESCRIPTION
The SPB-3660G series is small form factor pluggable module for IEEE 802.3ah 100BASE-BX and OC-3/STM-1 SONET/SDH single fiber communications by using 1310 nm transmitter and 1550 nm receiver. It is with the SFP 20-pin connector to allow hot plug capability. The transmitter section uses a multiple quantum well 1310 nm laser and is a class 1 laser compliant according to International Safety Standard IEC 60825. The receiver section uses an integrated 1550 nm detector preamplifier (IDP) mounted in an optical header and a limiting post-amplifier IC. LASER SAFETY This single mode transceiver is a Class 1 laser product. It complies with IEC 60825 and FDA 21 CFR 1040.10 and 1040.11. The transceiver must be operated within the specified temperature and voltage limits. The optical ports of the module shall be terminated with an optical connector or with a dust plug. ORDER INFORMATION P/No. Bit Rate (Mb/s) Distance (km) TX (nm) RX (nm) Package Temp (oC) TX Power (dBm) RX Sens. (dBm) RoHS Compliant SPB-3660G 125/155 60 1310 1550 SC SFP 0 to 70 0 to -5 -34 Yes SPB-3660BG 125/155 60 1310 1550 SC SFP -10 to 85 0 to -5 -34 Yes SPB-3660AG 125/155 60 1310 1550 SC SFP -40 to 85 0 to -5 -34 Yes SPB-3660LG 125/155 60 1310 1550 LC SFP 0 to 70 0 to -5 -34 Yes SPB-3660BLG 125/155 60 1310 1550 LC SFP -10 to 85 0 to -5 -34 Yes SPB-3660ALG 125/155 60 1310 1550 LC SFP -40 to 85 0 to -5 -34 Yes
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 Absolute Maximum Ratings Parameter Symbol Min Max Units Notes Storage Temperature Tstg -40 85 oC Operating Case Temperature Topr 0 -10 -40 oC SPB-3660G SPB-3660BG SPB-3660AG Power Supply Voltage Vcc 0 3.6 V Input Voltage --- GND Vcc V Output Current Iout 0 30 mA Recommended Operating Conditions Parameter Symbol Min Typ Max Units / Notes Power Supply Voltage Vcc 3.1 3.3 3.5 V Power Supply Current ICC (TX+RX) 200 300 mA Operating Case Temperature Topr 0 -10 -40 oC / SPB-3660G oC / SPB-3660BG oC / SPB-3660AG Data Rate 125/155 200 Mb/s Transmitter Specifications (0oC < Topr < 70oC, 3.1V < Vcc < 3.5V) Parameter Symbol Min Typ Max Units Notes Optical Optical Transmit Power Po -5 --- 0 dBm 1 Output Center Wavelength λ 1270 1360 nm Output Spectrum Width Δλ --- --- 3 nm RMS (σ) Extinction Ratio ER 10 --- --- dB Output Eye Compliant with Bellcore GR-253-CORE and ITU recommendation G.957 Optical Rise Time tr 2 ns 10% to 90% Values Optical Fall Time tf 2 ns 10% to 90% Values Relative Intensity Noise RIN -116 dB/Hz Total Jitter TJ 1.0 ns 2 Electrical Data Input Current – Low IIL -350 µA Data Input Current – High IIH 350 µA Differential Input Voltage VIH - VIL 0.5 2.4 V Peak-to-Peak TX Disable Input Voltage – Low TDIS, L 0 0.5 V 3 TX Disable Input Voltage – High TDIS, H 2.0 Vcc V 3 TX Disable Assert Time TASSERT 10 µs TX Disable Deassert Time TDEASSERT 1 ms TX Fault Output Voltage -- Low TFaultL 0 0.5 V 4 TX Fault Output Voltage -- High TFaultH 2.0 Vcc+0.3 V 4 Notes: 1. Output power is power coupled into a 9/125 µm single mode fiber. 2. Measured with a 223-1 PRBS. 3. There is an internal 4.7K to 10K ohm pull-up resistor to VccTX. 4. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage).
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 Receiver Specifications (0oC < Topr < 70oC, 3.1 V < Vcc < 3. 5V) Parameter Symbol Min Typ Max Units Notes Optical Sensitivity --- --- --- -34 dBm 5 Maximum Input Power Pin -8 --- --- dBm Signal Detect -- Asserted Pa --- --- -34 dBm Transition: low to high Signal Detect -- Deasserted Pd -43 --- --- dBm Transition: high to low Signal detect -- Hysteresis 1.0 --- dB Wavelength of Operation 1480 1580 nm 6 Optical Return Loss ORL 14 dB Electrical Differential Output Voltage VOH – VOL 0.6 2.0 V Output LOS Voltage -- Low VOL 0 0.5 V 7 Output LOS Voltage – High VOH 2.0 Vcc+0.3 V 7 Signal Detect Assert Time ASMAX 100 µs OFF to ON Signal Detect Deassert Time ANSMAX 300 µs ON to OFF Notes: 5. Minimum sensitivity and saturation levels at BER 1E-10 for a 223-1 PRBS. 6. At least 30 dB optical isolation for the wavelength 1260 to 1360 nm. 7. Open collector compatible, 4.7K to 10K ohm pull-up to Vcc (Host Supply Voltage). RECOMMENDED CIRCUIT SCHEMATIC 10nF 10μF 10nF 10μF VeeR POST Amp LD Driver Z=50Ω Z=50Ω Z=50Ω Z=50Ω VeeT 1μH 1μH TD - TD + VccT VccR RD - RD + 100Ω SFP module SerDes 100Ω LOS RD - RD + TD - TD + 10nF 10μF Protocol EEPROM MODULE DETECT SCL SDA LOSS OF SINGAL Tx_DISABLE Tx_FAULT MOD_DEF(0) MOD_DEF(1) MOD_DEF(2) 4.7K to 10KΩ 4.7K to 10KΩ 4.7K to 10KΩ 4.7K to 10KΩ Tx_FAULT Tx_DISABLE (1,17,20) (9,10,11,14) 4.7K to 10KΩ Vcc 3.3V Vcc 3.3V IC IC depending on SERDES
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 CONNECTION DIAGRAM PIN Signal Name Description PIN Signal Name Description
1 TX GND Transmitter Ground 11 RX GND Receiver Ground
2 TX Fault Transmitter Fault Indication 12 RX DATA OUT- Inverse Receiver Data Out
3 TX Disable Transmitter Disable (Module disables
on high or open)
13 RX DATA OUT+ Receiver Data Out
4 MOD-DFE2 Modulation Definition 2 – Two wires
14 RX GND Receiver Ground
5 MOD-DEF1 Modulation Definition 1 – Two wires
15 Vcc RX Receiver Power – 3.3V±5%
6 MOD-DEF0 Modulation Definition 0 – Ground in
16 Vcc TX Transmitter Power – 3.3V±5%
7 N/C Not Connected 17 TX GND Transmitter Ground
8 LOS Loss of Signal 18 TX DATA IN+ Transmitter Data In
9 RX GND Receiver Ground 19 TX DATA IN- Inverse Transmitter Data In
10 RX GND Receiver Ground 20 TX GND Transmitter Ground
Module Definition MOD-DEF2 PIN 4 MOD-DEF1 PIN 5 MOD-DEF0 PIN 6 Interpretation by Host
4 SDA SCL LV-TTL Low Serial module definition
Module Definition 4 specifies a serial definition protocol. For this definition, upon power up, MOD-DEF(1:2) appear as no connector (NC) and MOD-DEF(0) is TTL LOW. When the host system detects this condition, it activates the serial protocol. The protocol uses the 2-wire serial CMOS E2PROM protocol of the ATMEL AT24C01A/02/04 family of components.
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737 PACKAGE DIAGRAM Units in mm A) SC SFP A) LC SFP Note: Specifications subject to change without notice.
OPTOWAY TECHNOLOGY INC. No.38, Kuang Fu S. Road, Hu Kou, Hsin Chu Industrial Park, Hsin Chu, Taiwan 303 Tel: 886-3-5979798 Fax: 886-3-5979737
Revision History
Version Subject Release Date