8181203 FESTO | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 2
Technical content
Part number: 8181203 General operating condition Data sheet Feature Value Symbol 00997546 Certification RCM compliance mark CE marking (see declaration of conformity) As per EU EMC directive As per EU RoHS directive UKCA marking (see declaration of conformity) To UK instructions for EMC To UK RoHS instructions Note on materials RoHS-compliant Measured variable Relative pressure Method of measurement Piezoresistive pressure sensor Pressure measuring range initial value 0 MPa Pressure measuring range initial value 0 bar Pressure measuring range initial value 0 psi Pressure measuring range end value -0.1 MPa Pressure measuring range end value -1 bar Pressure measuring range end value -14.5 psi Overload pressure 0.5 MPa Overload pressure 5 bar Overload pressure 72.5 psi Operating medium Compressed air as per ISO 8573-1:2010 [7:4:4] Inert gas Information on operating and pilot media Ester oil < 0.1mg/m³, according to ISO 8573-1:2010 [-:-:2] Operation with oil lubrication possible Temperature of medium 0 °C ... 50 °C Ambient temperature 0 °C ... 50 °C Accuracy in ± % FS 1.5 %FS Repetition accuracy in ± %FS 0.3 %FS Temperature co-efficient in ± %FS/K 0.05 %FS/K Switching output PNP/NPN switchable Switching function Window comparator Threshold value comparator Threshold value with variable hysteresis Switching element function N/C contact/N/O contact switchable On time 3 ms Switch-off time 3 ms Max. output current 100 mA Short-circuit protection yes Protocol IO-Link® 1/21/26 - Subject to change - Festo SE & Co. KG 1/2
IO-Link, revision ID V1.1 IO-Link, device profile Firmware update Function Locator Function Product URI Function Quantity detection Smart Sensor - SSP 4.1.1 IO-Link, transmission rate COM3 IO-Link®, SIO mode support Yes IO-Link, port type Class A IO-Link, process data length output 0 bit IO-Link, process data length input 32 bit IO-Link®, process data content IN Pressure measured value 16 bit MDC Flow rate monitoring 2-bit SSC IO-Link®, service data contents IN Temperature 16 bit IO-Link®, minimum cycle time 0.9 ms IO-Link®, data memory required 500 byte DC operating voltage range 15 V ... 30 V Reverse polarity protection for all electrical connections Electrical connection 1, connection type Plug Electrical connection 1, connection technology M8x1 A-coded as per EN 61076-2-104 Electrical connection 1, number of pins/wires 3 Electrical connection 1, type of mounting Snap-locking Screw-type lock not rotatable Electrical connection 1, type of mounting Compatible with snap-locking Compatible with rotatable screw-type lock Electrical connection for input 1, connection pattern 00991155 Material of plug housing Brass, nickel-plated Type of mounting With accessories Mounting position Any Pneumatic connection QS-4 Product weight 30 g Housing material PA-reinforced Materials in contact with the media Stainless steel NBR PA-reinforced Display type LED display Ready status indication LED green Switching status indication LED yellow Setting options IO-Link® Teach-in Protection against tampering IO-Link® Setting range threshold value 0 % ... 100 % Setting range hysteresis 0 % ... 90 % Degree of protection IP65 Corrosion resistance class (CRC) 2 - Moderate corrosion stress LABS (PWIS) conformity VDMA24364-B1/B2-L Suitability for the production of Li-ion batteries Metals with more than 1% by mass of copper are excluded from use. Circuit boards, lines, electrical push-in connectors and coils are excluded Cleanroom suitability, measured according to ISO 14644-14 Class 4 according to ISO 14644-1 1/21/26 - Subject to change - Festo SE & Co. KG 2/2