SPA498-01 SSDI | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 2

Technical content

NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: PM0016B DOC Solid State Devices, Inc.

14701 Firestone Blvd * La Mirada, Ca 90638

Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com Designer’s Data Sheet Part Number / Ordering Information 1/ SPA498-01 __ └ Screening 2/ __ = Not Screened TX = TX Level TXV = TXV S = S Level Features:

  • Aerospace high voltage power supply applications
  • High blocking voltage – 13 kV minimum
  • Low mechanical stress design
  • TX, TXV, and Space level screening available
  • Consult factory for: - Higher blocking voltages - Faster switching speeds - Other electrical configurations SPA498-01

1 AMP, 13000 VOLTS

Characteristic Symbol Value Units Peak Repetitive Reverse Voltage and DC Blocking Voltage Bridge BR1 Bridge BR2 Bridge BR3 V R 5000 3000 5000 Volts Average Rectified Forward Current (Non-repetitive, t = 8.3 ms Pulse ) IO 1 Amps Peak Surge Current (Non-repetitive, t = 8.3 ms Pulse, T A = 25ºC) IFSM 25 Amps Operating and Storage Temperature T op & Tstg -65 to +150 ºC Maximum Thermal Resistance Junction to Tab RθJT 2.5 ºC/W ELECTRICAL SCHEMATIC Notes: 1/ For ordering information, price, operating curves, and availability, contact factory. 2/ Screening based on MIL-PRF-19500. Screening flows available on request. (+) (–) (+) (–)

NOTE: All specifications are subject to change without notification. SCD's for these devices should be reviewed by SSDI prior to release. DATA SHEET #: PM0016B DOC ELECTRICAL CHARACTERISTICS @ TA = 25ºC (unless otherwise specified) PARAMETER, per each Bridge (CR1-CR13) Leg SYMBOL MIN MAX UNIT Instantaneous Forward Voltage Drop (IF = 1.0 A, 300 – 500 µsec pulse) VF1 - 1.9 Volts Reverse Leakage (VR = 1000 V, 300 µsec pulse minimum) TA = 25ºC TA = 100ºC IR1 IR2 5.0 500 µAmps Reverse Recovery Time (IF = 0.5 A, IR = 1.0 A, IRR = 0.25 A) tRR - 70 nsec CASE OUTLINES: ASPM Tolerances (unless specified): .XX±.03 .XXX±.010 Solid State Devices, Inc. Phone: (562) 404-4474 * Fax: (562) 404-1773 ssdi@ssdi-power.com * www.ssdi-power.com SPA498-01