SPA2003-T-S-A01

SPA2003-T-S-A01 RECTRON | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 4

Technical content

FEATURES

• Low cos t * Low leaka ge * Low forward voltage drop * High current capabili ty * High surge current capabili ty MECHANICA L DATA * Case: Molded plast ic * Epoxy : Device has UL flammabilit y classificatio n 94V-O * Lead: MIL-STD-202E method 208C guarante ed * Mountin g position: Any * Weight: 2.08 gram s MAXIMUM R ATINGS AND ELECTRICAL CHARACTERISTIC S Rating s at 25 o C ambien t temperatur e unles s otherwis e specifie d. resistive or inductiv e load. SPA2003 -T-S-A01 R-7 MAXIMUM R AT ING S (At TA = 25 o C unless otherwis e noted) ELECTRICAL CHARACTERISTIC S (At TA = 25 o C unless otherwise noted) NOTES : 1. Measured at 1 MH 2. Heat-sink mounted 10mm max from body Z and applied reverse voltage of 4.0 volts Dimension s in inches and (millimeter s) 2011-10 REV:O RATING S Maximum Recurren t Peak Revers e Voltag e Maximum RMS Voltag e Maximum DC Blockin g Voltag e Peak Forward Surge Current 8.3 ms singl e half sine-wa ve superimpose d on rated load (JEDEC method ) Typical Junction Capacitanc e (Note ) Typical Current Square d Time Typical Thermal Resistan ce SYMBO L VRRM VDC IFS M CJ TJ TSTG VRMS UNIT S Volt s Volt s Volt s Amps20 400 663.7 125 2.6 1.2 Amps A2S pF 0 C 0 C 200 140 200 Storage T Operatin g Temperatur e Range emperatur e Range R θJ C R θJ L IO -55 to +175 0C/ W at Rated DC Blockin g Voltag e CHARACTERISTIC S Maximum Full Load Revers e Current Averag e Full Cycle .375” (9.5mm) lead length at TL = 75 o C VF SYMBO L IR UNIT S 1.0 uAmp s uAmp sMaximum DC Revers e Curre nt Maximum Instantaneou s Forward Voltag e at 20A DC Volt s @TA = 25 o C @TA = 100 o C 100 I2T SPA2003-T-S-A01 SPA2003-T-S-A01 * Ideal for solar panel PV application such as By-Pass diode 175(Tj<200oC in Bypass Mode) @TL=125oC(Note 2)Maximum DC Forward Curre nt .299 (7.6) .291 (7.4) .96 (24.5) MIN. .96 (24.5) MIN. DIA. .065 (1.65) .061 (1.55) .319 (8.1) .311 (7.9) DIA. 3. Available in Halogen-free epoxy by adding suffix -HF after the part nbr. VOLAGE 200 Volts CURRENT 20 Ampere

RATING AND CHARACTERISTIC CURVES ( SPA2003-T-S-A01 ) PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) INSTANTANEOUS FORWARD VOLTAGE, (V) INSTANTANEOUS FORWARD CURRENT, (A) LEAD TEMPERATURE, ( O 1.0 100 1000 AVERAGE FORWARD CURRENT, (A) 20 40 60 80 100 120 140200150 17510050 1.0 1.81.20.4 FIG.3 TYPICAL INSTANTANEOUS FORWARDFIG.3 TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS CHARACTERISTICS FIG.1 TYPICAL FORWARD CURRENTFIG.1 TYPICAL FORWARD CURRENT DERATING CURVE DERATING CURVE FIG.2 TYPICAL REVERSEFIG.2 TYPICAL REVERSE CHARACTERISTICS CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (uA) 100 Single Phase Half Wave 60Hz Inductive or Resistive Load TJ = 25 O C Pulse width=300 µS 1% Duty Cycle TA = 25 O C TA = 100 O C NUMBER OF CYCLES AT 60Hz PEAK FORWARD SURGE CURRENT, (A) 500 600 100 200 400 300 2 5 10 20 50 FIG.4 MAXIMUM NON-REPETITIVE FORWARDFIG.4 MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT SURGE CURRENT 8.3mS Single Half Sine-Wave JEDEC Method D.C with heat sink

Year – code: (Y:Last digit of year & A:2010, B:2011…) Month – code: (M:0~9,O,N,D) Part No. Voltage-code

Rectron Inc reserves the right to make changes without notice to any product specification herein, to make corrections, modifications, enhancements or other changes. Rectron Inc or anyone on its behalf assumes no responsibility or liabi- lity for any errors or inaccuracies. Data sheet specifications and its information contained are intended to provide a product description only. "Typical" paramet- ers which may be included on RECTRON data sheets and/ or specifications ca- n and do vary in different applications and actual performance may vary over ti- me. Rectron Inc does not assume any liability arising out of the application or use of any product or circuit. Rectron products are not designed, intended or authorized for use in medical, life-saving implant or other applications intended for life-sustaining or other rela- ted applications where a failure or malfunction of component or circuitry may di- rectly or indirectly cause injury or threaten a life without expressed written appr- oval of Rectron Inc. Customers using or selling Rectron components for use in such applications do so at their own risk and shall agree to fully indemnify Rect- ron Inc and its subsidiaries harmless against all claims, damages and expendit- ures. DISCLAIMER NOTICE