SPA-110-30-01-SMA FAIRVIEW | Alldatasheet
Document overview
- Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
- PDF pages: 7
Technical content
Features
- 8.5 GHz to 11 GHz Frequency Range
- High P1dB Output Power: 30 dBm
- Small Signal Gain: 30 dB min
- Gain Flatness: ±0.5 dB
- High Ouput IP3: 38 dBm
- Noise Figure: 3 dB
- 50 Ohm Input and Output Matched
- -30 to +60°C Operating Temperature
- Unconditionally Stable
- Regulated Supply & Bias Sequencing
- Hermetically Sealed Module
- Overvoltage External Protection for Easy Repair
Applications
- Telecom Infrastructure
- Test Instrumentation
- Fixed Microwave Backhaul
- Military & Space
- Radar Systems
- Communication Systems
- Microwave Radio Systems
- Satellite Communication
- Commercial Avionics
- Driver Amplifier
- High Power Output Amplifier
Description
SPA-110-30-01-SMA is a 1 W X-band coaxial power amplifier designed for high linearity applications in the 8.5 to 11 GHz frequency range. The amplifier offers 26 dB small signal gain with the excellent gain flatness of ±0.75 dB and the IP3 performance of 36 dBm. High power devices utilized in the amplifier provide excellent linearity, high gain and wide dynamic range. High efficiency is achieved through using hybrid MIC design and advanced GaAs PHEMT devices. The amplifier requires a +15V DC power supply. The connectorized SMA module is unconditionally stable and includes built-in voltage regulation, bias sequencing, and reverse bias protection for added reliability. The amplifier operates over the temperature range of -30°C and +60°C. Electrical Specifications (TA = +25°C, DC Voltage = +15Volts, DC Current = 900mA) Description Min Typ Max Unit Frequency Range 8.5 11 GHz Small Signal Gain 30 dB Gain Flatness ±0.5 ±1 dB Output Power at 1 dB Compression Point +29 +30 dBm Output 3rd Intercept Point +37 +38 dBm Noise Figure 1 (60 MHz to 200 MHz) 3 4 dB Impedance (Input) 50 Ohms Impedance (Output) 50 Ohms Input VSWR 1.7:1 2:1 Output VSWR 1.7:1 2:1 Operating DC Voltage +15 +15.5 Volts Operating DC Current 900 1.1 mA Operating Current 1.2 A Operating Temperature Range -30 +60 °C Electrical Specification Notes: Start-Up DC Current 10% to 20%
The Right Parts, Right Away +1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2023 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. Medium Power GaAs Amplifier at 1 Watt P1dB Operating from 8.5 GHz to 11 GHz with 38 dBm IP3, SMA Input, SMA Output and 30 dB Gain SPA-110-30-01-SMA Absolute Maximum Rating Parameter Rating Units Source Voltage +15.5 Volts RF input Power +17 dBm Operating Temperature (base-plate) -30 to +60 °C Storage Temperature -55 to +85 °C . ..5. ESD Sensitive Material, Transport material in Approved ESD bags. Handle only in approved ESD Workstation. Mechanical Specifications Size Length 2.1 in [53.34 mm] Width 1.15 in [29.21 mm] Height 0.42 in [10.67 mm] Weight 0.1185 lbs [53.75 g] Input Connector SMA Female Output Connector SMA Female Environmental Specifications Temperature Operating Range -30 to +60 deg C Compliance Certifications (see product page for current document) Plotted and Other Data Notes:
- Values at 25 °C, sea level
- ESD Sensitive Material, Transport material in Approved ESD bags. Handle only in approved ESD Workstation.
- Heat Sink Required for Proper Operation, Unit is cooled by conduction to heat sink.
The Right Parts, Right Away +1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2023 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. Medium Power GaAs Amplifier at 1 Watt P1dB Operating from 8.5 GHz to 11 GHz with 38 dBm IP3, SMA Input, SMA Output and 30 dB Gain SPA-110-30-01-SMA Amplifier Power-up Precautions 1.) Confirm that proper ESD precautions and controls are always in place before handling any Amplifier module. 2.) Confirm adequate thermal management is in place to effectively dissipate heat away from the Amplifier package. The Amplifier operational baseplate temperature must be within the operational temperature range stated in the Amplifier datasheet. Depending on the design and thermal requirements, using a heatsink with cooling fan is always recommended for safe reliable operation. A heat sink without a cooling fan may also be used. Damage caused from overheating will void the warranty. 3.) Confirm adequate system grounding is established. The DC power supply and Amplifier must have a common ground in order to operate properly. 4.) Power Amplifiers may require additional DC Current when initially powered- up. Depending on the design, the input current draw could range from an additional 10% to 100% above the maximum rated DC current of the Amplifier. This varies based on product part number. 5.) Confirm the DC power supply, if limited, is set to allow for additional start-up current that’s rated for the Power Amplifier. 6.) Confirm the system is designed and calibrated for 50 ohms. Any impedance mismatch may cause performance issues. 7.) Perform a CALIBRATION (if required) with the loads before connecting the Amplifier to the Network Analyzer to ensure proper performance. 8.) Use a fixed attenuator between the signal source and input port of the Amplifier to optimize the input VSWR match. 9.) Confirm the input power level at the input port of the amplifier does not exceed the maximum rated limit for input power (as stated in the Amplifier datasheet). Pin for Small Signal Gain = P1dB-SSG-10 dB Pin for P1dB = P1dB-SSG+1 dB 10.) Confirm the Network Analyzer is always connected to the Amplifier first before DC power is applied to the Amplifier. 11.) As long as the input and output ports of the amplifier are connected to a 50Ohm load and RF signal power is applied, the Amplifier can be powered up with DC voltage. 12.) Confirm the Amplifier output load is matched for a 50 Ohm impedance and will not exceed the maximum rated VSWR or Return Loss limit for the Amplifier. Exceeding the maximum rated VSWR or Return Loss limit will result in reflected signal power that could damage the Amplifier and void the warranty. 13.) Power Amplifier connected to an Antenna for signal transmission - It’s strongly recommended to use a high power fixed attenuator pad or an Isolator between the output port of the Amplifier and input port to the antenna. Any reflected signal power due to impedance mismatch will likely damage the Amplifier and void the warranty. 14.) The attenuator or isolator used at the output port of the Amplifier must be rated to handle the output power level and operational frequency band of the amplifier.
The Right Parts, Right Away +1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2023 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. Medium Power GaAs Amplifier at 1 Watt P1dB Operating from 8.5 GHz to 11 GHz with 38 dBm IP3, SMA Input, SMA Output and 30 dB Gain SPA-110-30-01-SMA Typical Performance Data dB dB -40 -30 -20 -10 Freq.(GHz) Gain, Input Return Loss and Output Return Loss Gain(dB) 25 C IN_Return Loss(dB) OUT_Return Loss(dB) Freq.(GHz) Gain vs Temperature Gain(dB) 25 C Gain(dB) 60 C Gain(dB) -30 C
The Right Parts, Right Away +1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2023 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. Medium Power GaAs Amplifier at 1 Watt P1dB Operating from 8.5 GHz to 11 GHz with 38 dBm IP3, SMA Input, SMA Output and 30 dB Gain SPA-110-30-01-SMA dB dBm Freq.(GHz) P1dB vs Temperature P1dB 60 C P1dB(dBm) 25 C 0.5 1.5 2.5 3.5 4.5 Freq.(GHz) NF vs Temperature NF(dB) 25 C NF(dB) 60 C
The Right Parts, Right Away +1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2023 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. Medium Power GaAs Amplifier at 1 Watt P1dB Operating from 8.5 GHz to 11 GHz with 38 dBm IP3, SMA Input, SMA Output and 30 dB Gain SPA-110-30-01-SMA .Medium Power GaAs Amplifier at 1 Watt P1dB Operating from 8.5 GHz to 11 GHz with 38 dBm IP3, SMA Input, SMA Output and 30 dB Gain from Fairview Microwave is in-stock and available to ship same-day. All of our RF/microwave products are available off-the-shelf from our ISO 9001:2008 certified facilities in Lewisville, Texas. Fairview Microwave is RF on-demand. For additional information on this product, please click the following link: Medium Power GaAs Amplifier at 1 Watt P1dB Operating from 8.5 GHz to 11 GHz with 38 dBm IP3, SMA Input, SMA Output and 30 dB Gain SPA-110-30-01-SMA URL: https://www.fairviewmicrowave.com/medium-power-amplifier-1watt-30db-spa-110-30-01-sma-p.aspx The information contained within this document is accurate to the best of our knowledge and representative of the part described herein. It may be necessary to make modifications to the part and/or the documentation of the part in order to impliment improvements. Fairview Microwave reserves the right to make such changes as required. Unless otherwise stated, all specifications are nominal. Fairview Microwave does not make any representation or warranty regarding the suitability of the part described herein for any particular purpose, and Fairview Microwave does not assume liability arising out of the use of any part or document.
+1 (866) 839-4711 | sales@fairviewmicrowave.com | fairviewmicrowave.com © 2023 Infinite Electronics, Inc. Fairview Microwave is a registered trademark of Infinite Electronics, Inc. 2.10 53.3 1.15 29.2 1.86 47.2 .12 3.0 .91 23.1 4X .125 3.18 THRU HOLES .12 3.0 .67 17.0 ZENER DIODE SMA FEMALE .42 10.7 .21 5.3 .196 4.98 1.50 38.1 .30 7.6 .91 23.1 .12 3.0 4X 4-40 UNC .190 [4.83] REVISIONS REV. DESCRIPTION DATE APPROVED A PCR SPA-110-30-01-SMA 7/7/2020 T.GALLA TITLE THE INFORMATION AND DESIGN IN THIS DOCUMENT IS THE PROPERTY OF FAIRVIEW MICROWAVE CORPORATION. ALL RIGHTS RESERVED. K.DANG ASPA-110-30-01-SMA ALL DIMENSIONS SHOWN ARE FOR REFERENCE ONLY. DRAWN BY THIRD-ANGLE PROJECTION SHEET OF A SCALE SIZE 3FKR5 UNLESS OTHERWISE SPECIFIED LEADING DIMENSIONS ARE INCHES DIMENSIONS IN [ ] ARE MILLIMETERS REV 1 1 N/A ITEM NO.CAGE CODE THESE COMMODITIES, TECHNOLOGY OR SOFTWARE WERE EXPORTED FROM THE UNITED STATES IN ACCORDANCE WITH THE EXPORT ADMINISTRATION REGULATIONS. DIVERSION CONTRARY TO U.S. LAW PROHIBITED. °ANGLES ± 1 ± 1/32 FRACTIONS.2 [5.08].X = ± .XX = ±.02 [ .51 ] TOLERANCES: CABLE LENGTH (L) TOLERANCES: T-Rev.D SPA-110-30-01-SMA CAD Drawing Medium Power GaAs Amplifier at 1 Watt P1dB Operating from 8.5 GHz to