SP4203

SP4203 LITTELFUSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 5

Technical content

Features

• ESD, IEC 61000-4-2, ±30kV contact, ±30kV air
• EFT , IEC 61000-4-4, 40A (5/50ns)
• Lightning, 10A (8/20 as defined in IEC 61000-4-5 2nd edition)
• Low capacitance of 0.5pF (@ VR=0V)
• Low leakage current
• Small SOD323 package fits 0805 footprints
• AEC-Q101 qualified
• Halogen free, lead free and RoHS compliant
• Moisture Sensitivity Level (MSL -1)
• xDSL Interfaces
• RS-232
• RS-485
• Power Ports
• Security Equipment
• Instrumentation
• Medical Equipment
• Computers and Peripherals Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. SP4203 0.5 pF, 10A bidirectional discrete TVS diodes Functional Block Diagram Pinout Pin 1 Pin 2 Low Capacitance ESD Protection - SP4203 RoHS Pb GREEN

©2018 Littelfuse, Inc. Specifications are subject to change without notice. TVS Diode Arrays (SPA ® Diodes) Revision: 10/17/18 TVS Diode Arrays (SPA® Diodes) Lightning Surge Protection- SP4022 Series Notes: CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Absolute Maximum Ratings Symbol Parameter Value Units IPP Peak Current (tp=8/20μs) 10 A TOP Operating Temperature -40 to 125 °C TSTOR Storage Temperature -55 to 150 °C Electrical Characteristics (TOP=25ºC) Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage VRWM IR=1μA 3.3 V Breakdown Voltage VBR IR=1mA 5.5 6.6 V Reverse Leakage Current ILEAK VR=3.3V 0.1 μA Clamp Voltage1 VC IPP=1A, tP=8/20µs 7. 5 10 V IPP=10A, tP=8/20µs 16.5 20 V Dynamic Resistance2 RDYN TLP , tP=100ns, I/O to I/O 0.54 Ω ESD Withstand Voltage1 VESD IEC 61000-4-2 (Contact Discharge) ±30 kV IEC 61000-4-2 (Air Discharge) ±30 kV Diode Capacitance1 CI/O-I/O Reverse Bias=0V , f=1MHz 0.5 0.9 pF Notes: 1Parameter is guaranteed by design and/or component characterization. 2.Transmission Line Pulse (TLP) with 100ns width, 2ns rise time, and average window t1=70ns to t2= 90ns 8/20μs Pulse Waveform 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 110% Time (/uni03BCs) Percent of IPP Capacitance vs. Reverse Bias Low Capacitance ESD Protection - SP4203 0.0 0.2 0.4 0.6 0.8 1.0 01 .1 2.23 .3 Capacitance (pF) Bias Voltage (V)

©2018 Littelfuse, Inc. Specifications are subject to change without notice. TVS Diode Arrays (SPA ® Diodes) Revision: 10/17/18 TVS Diode Arrays (SPA® Diodes) Lightning Surge Protection- SP4022 Series Clamping voltage vs. IPP for 8/20μs waveshape Negative T ransmission Line Pulsing (TLP) Plot Low Capacitance ESD Protection - SP4203 02468 10 Clamp Voltage (VC ) Peak Pulse Current- IPP (A) -20 -15 -10 TLP Voltage (V) TLP Current (A) IEC 61000-4-2 +8kV Contact ESD Clamping Voltage Positive T ransmission Line Pulsing (TLP) Plot 024681 01 21 41 61 8 TLP Voltage (V) TLP Current (A) IEC 61000-4-2 -8kV Contact ESD Clamping Voltage

©2018 Littelfuse, Inc. Specifications are subject to change without notice. TVS Diode Arrays (SPA ® Diodes) Revision: 10/17/18 TVS Diode Arrays (SPA® Diodes) Lightning Surge Protection- SP4022 Series Surge Protection - SP1224Low Capacitance ESD Protection - SP4203 Reflow Condition Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus) Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 260°C Soldering Parameters Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do Critical Zone TL to TP Critical Zone TL to TP Product Characteristics Lead Plating Matte Tin Lead Material Alloy 42 Lead Coplanarity 0.004 inches(0.102mm) Substrate Material Silicon Body Material Molded Compound Flammability UL Recognized compound meeting flammability rating V-0

Ordering Information

Part Number Package Min. Order Qty. SP4203-01FTG-C SOD323 3000 Part Numbering SystemPart Marking System SP 01 T G Series Number of Channels Package T= Tape & Reel G= Green TVS Diode Arrays (SPA Diodes F: SOD323 F4203 C C= Bidirectional CA* Date code Assembly site Part code

©2018 Littelfuse, Inc. Specifications are subject to change without notice. TVS Diode Arrays (SPA ® Diodes) Revision: 10/17/18 TVS Diode Arrays (SPA® Diodes) Lightning Surge Protection- SP4022 Series Drawing#: F03-A E b A2A1 A D C L 1.80mm 2.30mm 2.80mm 0.45mm Recommended soldering pad layout Top View Side View Side View Embossed Carrier T ape & Reel Specification — SOD323 Symbol SOD323 Millimeters Inches Min Max Min Max A - 1. 0 0 - 0.039 A1 0.00 0.10 0.000 0.004 A2 0.80 0.90 0.031 0.035 b 0.25 0.35 0.010 0.014 c 0.08 0.15 0.003 0.006 D 1 .20 1 .40 0.047 0.055 E 1 .60 1 .90 0.063 0.075 E1 2.50 2.70 0.098 0.106 L 0.475 REF 0.019 REF L1 0.25 0.40 0.010 0.016 L2 0.20 BSC 0.008 BSC Symbol Millimeters A0 1 .46+/-0.10 B0 2.90+/-0.10 W 8.0+0.3/-0.10 D0 1 .50+0.10 D1 0.45min/1 .15max E1 1 .75+/-0.10 E2 - F 3.50+/-0.10 P0 4.00+/-0.10 P 4.00+/-0.10 P1 2.00+/-0.05 K0 1 .25+/-0.10 T 0.254+/-0.02 Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. ,Ref. ,Ref. ,Ref. 8mm TAPE AND REEL Low Capacitance ESD Protection - SP4203