SP4010

SP4010 LITTELFUSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
• PDF pages: 5

Technical content

TVS Diode Arrays (SPA® Diodes) Datasheet © 2022 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 09/22/22 SP4010 Series 0.48pF Diode Array

Description

Applications

The SP4010 integrates 2 channels of ultra low capacitance asymmetrical protection for electronic equipment that may experience destructive electrostatic discharges (ESD). These robust components can safely absorb repetitive ESD strikes above the maximum contact level specified in the IEC 61000-4-2 international standard (±30kV contact discharge) without performance degradation. The extremely low off-state capacitance also makes it ideal for protecting high speed signal lines such as USB3.0,HDMI, USB2.0, and eSATA. Features & Benefits ■ ESD, IEC 61000-4-2, ±30kV contact, ±30kV air ■ EFT , IEC 61000-4-4, 40A (tP=5/50ns) ■ Lightning, IEC 61000-4-5 2nd edition, 23A (tP=8/20μs) ■ Low capacitance of 0.48pF @0V , 1MHz (TYP) per I/O ■ Low leakage current of 0.2μA (MAX) at 10V ■ Moisture Sensitivity Level (MSL -1) ■ Halogen free, lead free and RoHS compliant ■ LCD/PDP TVs ■ External Storages ■ DVD/Blu-ray Players ■ Desktops ■ MP3/PMP ■ Set Top Boxes ■ Smartphones ■ Ultrabooks/Notebooks ■ Digital Cameras Pinout Functional Block Diagram Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. RoHS Pb GREEN SP3012-06UTG (AEC-Q101 Qualified) SP3012-03UTG 6 7 8 9 10 SP3012-04UTG (AEC-Q101 Qualified) SP3012-04HTG(AEC-Q101 Qualified) 3 2 1 4 5 6 5 4 3 2 1 1 2 3 6 5 4 *Pins 6, 7, 9, 10 are not internally connected but should be connected to the trace. *Pins 1, 2, 3, 4, 5, 6, 7 are not internally connected but should be connected to the opposite pin with the PCB trace. I/O1 I/O2 Resources Accessories Samples Additional Information

TVS Diode Arrays (SPA® Diodes) Datasheet © 2022 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 09/22/22 SP4010 Series 0.48pF Diode Array SP3012 Absolute Maximum Ratings Symbol Parameter Value Units IPP Peak Current (tp=8/20μs) 23 A TOP Operating Temperature -40 to 125 °C TSTOR Storage Temperature -55 to 150 °C Electrical Characteristics (TOP=25ºC) Note: 1. Parameter is guaranteed by design and/or component characterization. 2. Transmission Line Pulse (TLP) with 100ns width, 2ns rise time, and average window t1=70ns to t2= 90ns Positive T ransmission Line Pulsing (TLP) Plot Negative T ransmission Line Pulsing (TLP) Plot Parameter Symbol T est Conditions Min Ty p Max Units Reverse Standoff Voltage VRWM IR = 1μA 10 V Breakdown Voltage VBR IR = 1mA, I/O to I/O 10.5 12.5 V Reverse Leakage Current ILEAK VR=10V , , I/O to I/O 0.01 0.2 μA Clamp Voltage1 VC IPP=16A, tp=8/20μs, I/O to I/O 27 .5 29 V IPP=23A, tp=8/20μs, I/O to I/O 39 43 V Dynamic Resistance2 RDYN TLP , tp=100ns, I/O to I/O 0.7 Ω ESD Withstand Voltage1 VESD IEC 61000-4-2 (Contact Discharge) ±30 kV IEC 61000-4-2 (Air Discharge) ±30 kV Diode Capacitance1 CI/O-I/O Reverse Bias=0V , f=1MHz, I/O to I/O 0.48 1 pF Caution: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. 05 10 15 20 25 30 TLP Voltage (V) TLP Current (A) -24 -22 -20 -18 -16 -14 -12 -10 TLP Voltage (V) TLP Current (A)

TVS Diode Arrays (SPA® Diodes) Datasheet © 2022 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 09/22/22 SP4010 Series 0.48pF Diode Array IEC 61000-4-2 +8 kV Contact ESD Clamping Voltage IEC 61000-4-2 -8 kV Contact ESD Clamping Voltage 8/20 μs Pulse Waveform 05 10 15 20 25 Clamp Voltage (VC) Peak Pulse Current-IPP (A) 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 110% Time (/uni03BCs) Pe rcen t of IPP Clamping Voltage vs. IPP for 8/20 μs waveshape

TVS Diode Arrays (SPA® Diodes) Datasheet © 2022 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 09/22/22 SP4010 Series 0.48pF Diode Array Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-dow Critical Zone TL to TP Critical Zone TL to TP Reflow Condition Pb – Free assembly Pre Heat - T emperature Min (Ts(min)) 150°C - T emperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus) T emp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - T emperature (TL) (Liquidus) 217°C - T emperature (tL) 60 – 150 seconds Peak T emperature (TP) 260+0/-5 °C Time within 5°C of actual peak T emperature (tp) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak T emperature (TP) 8 minutes Max. Do not exceed 260°C Soldering Parameters Part Numbering SystemPart Marking System SP 4010 02 T G Series Package T= Tape & Reel G= Green Number of Channels TVS Diode Arrays (SPA Diodes) SOT23-6L H AHD* 1 2 3 6 5 4 AH : Part code D : Assembly code * : Date code Part Number Package Min. Order Qty. SP4010-02HTG SOT23-6L 3000 Ordering Information Product Characteristics Lead Plating Matte tin Lead Material Copper Alloy Lead Coplanarity 0.0004 inches (0.102mm) Substrate Material Silicon Body Material Molded Compound Flammability UL Recognized compound meeting flammability rating V-0

TVS Diode Arrays (SPA® Diodes) Datasheet © 2022 Littelfuse, Inc. Specifications are subject to change without notice. Revised: GD. 09/22/22 SP4010 Series 0.48pF Diode Array Embossed Carrier T ape & Reel Specification — SOT23-6L 8mm TAPE AND REEL GENERAL INFORMA TION 1. 3000 PIECES PER REEL. 2. ORDER IN MUL TIPLES OF FULL REELS ONLY. 3. MEETS EIA-481 REVISION "A" SPECIFICATIONS. 2.0mm 4.0mm CL 1.75mm1.5mm DIA. HOLE 8mm 4.0mm 8.4mm 180mm 14.4mm 13mm 60mm ACCESS HOLE CO VER TAPE USER DIRECTION OF FEED PIN 1 SO T-23 (8mm POCKET PITCH) Recommended soldering pad layout (unit :mm) 0.95 0.850.85 3.3 0.60 0.95 D e b x 6 A Pin1 Top View Side View E Side View L Symbol Millimeters Min Nom Max A - - 1 .45 A1 0.00 - 0.15 A2 0.90 1. 15 1 .30 D 2.75 2.90 3.05 E 2.60 2.80 3.00 E1 1 .45 1 .60 1 .75 e 0.95 BSC e1 1 .90 BSC L 0.30 0.50 0.60 Ɵ 0° 4° 8° Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics.