SP3420-04UTG LITTELFUSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 5

Technical content

Features

  • ESD, IEC 61000-4-2, ±12kV contact, ±15kV air
  • EFT , IEC 61000-4-4, 40A (5/50ns)
  • Lightning, IEC 61000- 4-5 2nd edition, 6A (tP=8/20μs)
  • Low capacitance of 0.32pF@1 .5V (TYP)
  • Low leakage current of 0.02μA (TYP) at 3.3V
  • Low operating and clamping voltage
  • AEC-Q101 qualified
  • Halogen free, Lead free and RoHS compliant
  • Moisture Sensitivity Level (MSL -1)
  • Ultra-high speed data lines
  • DisplayPort(TM)
  • Thunderbolt (Light Peak)
  • V-by-One®
  • LVDS interfaces
  • Consumer, mobile and portable electronics
  • Tablet PC and external storage with high speed interfaces Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. RoHS Pb GREENSP3420, 0.32pF, 6A Diode Array Functional Block Diagram Pinout Bottom View 1 2 3.G 4 5 10 9 8.G 7 6 123 4 5 6 G 1 2 G G, 3, 8 1 54 G 1 43 65 G 1 43

0402 DFN arra y

1103 DFN arra y

0802 DFN arra y

1004 DFN arra y

Low Capacitance ESD Protection - SP3420-04UTG

©2019 Littelfuse, Inc. Specifications are subject to change without notice. TVS Diode Arrays (SPA ® Diodes) Revision: 07/16/19 TVS Diode Arrays (SPA® Diodes) Lightning Surge Protection- SP3384NUTG Notes: CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Absolute Maximum Ratings Symbol Parameter Value Units IPP Peak Current (tp=8/20μs) 6 A TOP Operating Temperature -40 to 125 °C TSTOR Storage Temperature -55 to 150 °C Electrical Characteristics (TOP=25ºC) Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage VRWM IR = 1μA 3.3 V Breakdown Voltage VBR IR = 1mA 6.5 8.5 V Reverse Leakage Current ILEAK VR=3.3V 0.02 0.1 μA Holding Voltage VHOLD I/O to GND 1. 7 V Clamp Voltage1 VC IPP=1A, tp=8/20μs 2.7 3.5 V IPP=6A, tp=8/20μs 4 6 V Dynamic Resistance2 RDYN TLP , tp=100ns 0.3 Ω ESD Withstand Voltage1,3 VESD IEC 61000-4-2 (Contact Discharge) ±12 kV IEC 61000-4-2 (Air Discharge) ±15 kV Diode Capacitance1 CI/O-GND Reverse Bias=1 .5V , f=1MHz 0.32 0.35 pF Notes: 1Parameter is guaranteed by design and/or component characterization. 2 Transmission Line Pulse (TLP) test setting : Std.TDR(50Ω),tp=100ns, tr=0.2ns ITLP and VTLP averaging window: start t1=70ns to end t2=90ns 3 Device stressed with ten non-repetitive ESD pulses. 8/20μs Pulse Waveform 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 110% Time (/uni03BCs) Percent of IPP Capacitance vs. Reverse Bias Low Capacitance ESD Protection - SP3420-04UTG 0.0 0.1 0.2 0.3 0.4 0.5 Capacitance (pF) Bias Voltage (V)

©2019 Littelfuse, Inc. Specifications are subject to change without notice. TVS Diode Arrays (SPA ® Diodes) Revision: 07/16/19 TVS Diode Arrays (SPA® Diodes) Lightning Surge Protection- SP3384NUTG Clamping Voltage vs. Peak Pulse Current Positive T ransmission Line Pulsing (TLP) Plot Low Capacitance ESD Protection - SP3420-04UTG 05 10 15 20 25 TLP Current (A) TLP Voltage (V) Negative T ransmission Line Pulsing (TLP) Plot -20 -18 -16 -14 -12 -10 -10- 8- 6- 4- 20 TLP Current (A) TLP Voltage (V) 0.0 1.0 2.0 3.0 4.0 5.0 6.0 Clamp Voltage-Vc (V) Peak Pulse Current-IPP (A) IEC 61000−4−2 +8 kV Contact ESD Clamping Voltage IEC 61000−4−2 -8 kV Contact ESD Clamping Voltage

©2019 Littelfuse, Inc. Specifications are subject to change without notice. TVS Diode Arrays (SPA ® Diodes) Revision: 07/16/19 TVS Diode Arrays (SPA® Diodes) Lightning Surge Protection- SP3384NUTG Low Capacitance ESD Protection - SP3420-04UTG Part Numbering SystemPart Marking System µDFN-10 (2.5x1.0mm) SP 3420

04 U T G

T= Tape & Reel G= Green Number of Channels TVS Diode Arrays (SPA Diodes) AN * * Date code Assembly site Product series

Ordering Information

Part Number Package Min. Order Qty. SP3420-04UTG μDFN-10 (2.5x1 .0mm) 3000 Product Characteristics Lead Plating PPF Lead Material Copper Alloy Substrate Material Silicon Body Material Molded Compound Flammability UL Recognized compound meeting flammability rating V-0 Reflow Condition Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus) Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 260°C Soldering Parameters Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do Critical Zone TL to TP Critical Zone TL to TP

©2019 Littelfuse, Inc. Specifications are subject to change without notice. TVS Diode Arrays (SPA ® Diodes) Revision: 07/16/19 TVS Diode Arrays (SPA® Diodes) Lightning Surge Protection- SP3384NUTG Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. T ape & Reel Specification — µDFN-10 (2.5x1.0mm) 1 1 4FDUJPO:: Symbol Millimeters A0 1 .15 min/1 .30 max B0 2.70+/-0.05 D0 ø 1 .50 min/1 .65 max D1 ø 0.50 min/1 .05 max E1 1 .75+/-0.10 F 3.50+/-0.10 K0 0.46 min/0.75 max P0 4.00+/-0.10 P1 4.00+/-0.10 P2 2.00+/-0.05 W 8.00+0.30/-0.10 T 0.17 min/0.30 max T F E W 5º Max 5º Max User Feeding Direction Pin 1 Location Low Capacitance ESD Protection - SP3420-04UTG Package Dimensions - μDFN-10 (2.5x1.0mm) SIDE VIEW-1 BOTTOM VIEW-1 TOP VIEW SOLDERING PATTERN UNIT: mm RECOMMENDED ALTERNATIVE Symbol Millimeters Inches Min Max Min Max A 0.40 0.60 0.013 0.024 A1 0.00 0.05 0.000 0.002 A3 0.127 REF 0.005 REF b1 0.15 0.25 0.006 0.010 b2 0.35 0.45 0.014 0.018 D 2.40 2.60 0.094 0.102 E 0.90 1 .10 0.035 0.043 e 0.50 BSC 0.020 BSC L 0.28 0.48 0.011 0.019 L1 0.00 0.15 0.000 0.006 R 0.125 REF 0.005 REF ,Ref. ,Ref. ,Ref. 8mm TAPE AND REEL