SP3384NUTG LITTELFUSE | Alldatasheet

Document overview

  • Manufacturer or author: Provided By alldatasheet.com(free datasheet download site)
  • PDF pages: 5

Technical content

Features

■ ESD, IEC 61000-4-2, ±30kV contact, ±30kV air ■ EFT , IEC 61000-4-4, 40A (5/50ns) ■ Lightning, IEC 61000- 4-5 2nd edition, 15A (tP=8/20μs) ■ Low capacitance of 0.5pF@0V (TYP) ■ Low leakage current of 3nA(typ) & 40nA(max) at 3.3V ■ Low leakage current of 40nA at 3.3V in 100˚C” ■ Low operating and clamping voltage ■ μDFN-10 package is optimized for high-speed data line routing ■ Provides protection for two differential data pairs (4 channels) up to 15A ■ AEC-Q101 qualified ■ Halogen free, Lead free and RoHS compliant ■ Moisture Sensitivity Level (MSL -1) ■ WAN/LAN Equipment ■ Desktops, Servers and Notebooks ■ LVDS Interfaces ■ Integrated Magnetics ■ Smart TV ■ 2.5G/5G/10G Ethernet Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. RoHS Pb Functional Block Diagram 1 2 4 5 3,8 Pinout 10 9 8 7 6 1 2 3 4 5 NC NC NC NC middle pad middle pad middle pad Note: PIN3, PIN8 and middle PADs are same potential Top View RJ -45 Connector Ethernet PHY SP3384NUTG TP0+ TP0- TP1+ TP1- TP2+ TP2- TP3+ TP3- Application Example

© 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC. 11/29/21 SP3384NUTG Series Lightning Surge Protection CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Absolute Maximum Ratings Symbol Parameter Value Units IPP Peak Current (tp=8/20μs) 15 A TOP Operating Temperature -40 to 125 °C TSTOR Storage Temperature -55 to 150 °C Electrical Characteristics (TOP=25ºC) Parameter Symbol T est Conditions Min Ty p Max Units Reverse Standoff Voltage VRWM IR = 1μA 3.3 V Breakdown Voltage VBR IR = 1mA 6.5 9 V Reverse Leakage Current ILEAK VR=3.3V 3 20 nA VR=3.3V at 100°C 40 nA Holding Voltage VHOLD I/O to I/O 2.3 V Clamp Voltage1 VC IPP=1A, tp=8/20μs 4 5.5 V IPP=15A, tp=8/20μs 12 15 V Dynamic Resistance2 RDYN TLP , tp=100ns 0.34 Ω ESD Withstand Voltage1,3 VESD IEC 61000-4-2 (Contact Discharge) ±30 kV IEC 61000-4-2 (Air Discharge) ±30 kV Diode Capacitance1 CI/O-I/O Reverse Bias=0V , f=1MHz 0.5 0.7 pF Notes: 1. Parameter is guaranteed by design and/or component characterization. 2. Transmission Line Pulse (TLP) test setting : Std.TDR(50Ω),tp=100ns, tr=0.2ns ITLP and VTLP averaging window: start t1=70ns to end t2=90ns 3. Device stressed with ten non-repetitive ESD pulses. 8/20μs Pulse Waveform 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 110% Time (/uni03BCs) Percent of IPP Capacitance vs. Reverse Bias 0.0 0.2 0.4 0.6 0.8 1.0 Capacitance (pF) Bias Voltage (V)

© 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC. 11/29/21 SP3384NUTG Series Lightning Surge Protection Positive T ransmission Line Pulsing (TLP) Plot Clamping Voltage vs. Peak Pulse Current 0.0 3.0 6.0 9.0 12.0 15.0 Clamp Voltage-VC (V) Peak Pulse Current-IPP (A) Negative T ransmission Line Pulsing (TLP) Plot -25 -20 -15 -10 -25- 20 -15- 10 -5 0 TLP Current (A) TLP Voltage (V) 05 10 15 20 25 TLP Current (A) TLP Voltage (V) IEC 61000-4-2 +8 kV Contact ESD Clamping Voltage IEC 61000-4-2 -8 kV Contact ESD Clamping Voltage

© 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC. 11/29/21 SP3384NUTG Series Lightning Surge Protection

Ordering Information

Part Number Package Min. Order Qty. SP3384NUTG μDFN-10 (3.0x2.0mm) 3000 Part Numbering SystemPart Marking System SP3384N U T G Package /uni03BCDFN-10 (3.0x2.0mm) T= Tape & Reel G= Green TVS Diode Arrays (SPA Diodes)® Series SP3384 GYYWW First row = Part name = SP3384 Second row = Assembly code + Date Code Product Characteristics Lead Plating PPF Lead Material Copper Alloy Substrate Material Silicon Body Material Molded Compound Flammability UL Recognized compound meeting flammability rating V-0 Reflow Condition Pb – Free assembly Pre Heat - T emperature Min (Ts(min)) 150°C - T emperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 120 secs Average ramp up rate (Liquidus) T emp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - T emperature (TL) (Liquidus) 217°C - T emperature (tL) 60 – 150 seconds Peak T emperature (TP) 260+0/-5 °C Time within 5°C of actual peak T emperature (tp) 30 seconds Ramp-down Rate 6°C/second max Time 25°C to peak T emperature (TP) 8 minutes Max. Do not exceed 260°C Soldering Parameters Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-dow Critical Zone TL to TP Critical Zone TL to TP

© 2021 Littelfuse, Inc. Specifications are subject to change without notice. Revised: JC. 11/29/21 SP3384NUTG Series Lightning Surge Protection Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. T ape & Reel Specification — µDFN-10 (3.0x2.0mm) Package µDFN-10 (3.0x2.0mm) Symbol Millimeters A0 2.30 +/- 0.10 B0 3.20 +/- 0.10 E 1 .75 +/- 0.10 F 3.50 +/- 0.05 K0 1 .0 +/- 0.10 P 4.00 +/- 0.10 P0 4.00 +/- 0.10 P2 2.00 +/- 0.10 T 0.3 +/- 0.05 W P P0 P2 ø1.55±0.05 E FA0 T Top Cover Tape 5° Max Pin1 Location Device Orientation in Tape ø1.0±0.1 ,Ref. ,Ref. ,Ref. 8mm TAPE AND REEL Package Dimensions - μDFN-10 (3.0x2.0mm) Top View Bottom View Side View Recommended Soldering Layout D E e e1 e1 e D2 e2 b A L (Drawing# : U05-A) 106 610 0.95mm 0.95mm 0.25mm 1.00mm 2.60mm 0.40mm 0.60mm 0.65mm 0.65mm 0.60mm 1.40mm0.60mm1 Symbol Millimeters Inches Min Nom Max Min Nom Max A2 0.15 Ref 0.006 Ref e 0.60 BSC 0.024 BSC e1 0.65 BSC 0.026 BSC e2 0.95 BSC 0.037 BSC