SP320 ASTRODYNE | Alldatasheet
Document overview
- Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
- PDF pages: 4
Technical content
320W Single Output with PFC Function SP320 series WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 Universal AC input Protections:Short circuit/Over load/Over voltage/Over temperarure Built-in active PFC function, PF >0.95 Forced air cooling by built-in DC Fan Built-in fan speed control Fixed switching frequency at 100KHz Model Number Output Volts Output Amps OVP Min Load DC Volt Adjust Load Reg Efficiency SINGLE OUTPUT SP320-12 12 Volts(DC) 25 Amps 13.8 ~ 16.2Volt(DC) 0~25Amps 10~13.2Volt(DC ±0.5% 86% SP320-15 15 Volts(DC) 20 Amps 18 ~ 21Volt(DC) 0~20Amps 13.5~18Volt(DC) ±0.5% 86% SP320-24 24 Volts(DC) 13 Amps 27.6 ~ 32.4Volt(DC) 0~13Amps 20~26.4Volt(DC) ±0.5% 87%
320W Single Output with PFC Function SP320 series WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458 INPUT SPECIFICATIONS Input Voltage Range (Note3) 90 ~ 264VAC 124~370 Volts(DC) Frequency Range 47-63 Hz Inrush Current, typ: (cold start) 20Amps/115VAC; 40Amps 230VAC Input Current 3.3Volts(DC):2.5Amps@115VAC;1.5 Amps@230VAC 5~48Volts(DC): 5Amps@115VAC;2.5Amps@230VAC Leakage current < 1mAmps / 240VAC Min Load See Selection Chart Power Factor @ FL PF> 0.95 / 230VAC > 0.98 / 115VAC OUTPUT SPECIFICATIONS Voltage and Current See Selection Chart Line Regulation ±0.5%: 3.3~7.5Volts(DC) ±0.3%: 12~15Volts(DC) ±0.2%: 24~48Volts(DC) Load Regulation See Selection Chart Voltage Tolerance (Note 2) ±2.0%: 3.3;12~48Volts(DC) ±1.0%: 5~7.5Volts(DC) Ripple/Noise (Note 1) 150mVpk-pk: 3.3~24Volts(DC) 200mVpk-pk: 27Volts(DC) 220mVpk-pk: 36Volts(DC) 240mVpk-pk: 48(DC) Hold Up Time @ FL 16mS /230VAC 16mS /115VAC Setup, Rise Time @ FL 800mS, 50mS /230VAC 2500mS, 50mS /115VAC Over Voltage Protection See Selection Chart Shut down o/p voltage,re-power Over Current Protection 105 ~ 135% rated output power Hiccup mode, auto recover Over Temperature 80°C ±5°C (70°C±5°C 3.3;5V only) TSW1: detect on heatsink of power transistor Shut down o/p voltage, auto recover after cool down DC Volt Adjust See Selection Chart GENERAL SPECIFICATIONS Safety UL60950-1, TUV EN60950-1 Approved Insulation Resistance ≥ 100MΩ / 500Volts(DC) EMI Compliance to EN55022B (CISPR22B) Harmonic Current Compliance to EN61000-3-2,-3 Efficiency See Selection Chart Isolation 3000VAC Input - Output 1500VAC Input - Ground 500VAC Output - Ground EMS Compliance to ENV50204,EN55024, light Industry Level, Criteria A ENVIRONMENTAL SPECIFICATIONS Oper. Temperature -20°C to +65°C (See Derate Curve) Storage Temperature -40°C to +85°C, 10~95% RH Relative Humidity 20~90% RH non cond Temperature Coefficient ±0.03% / °C (0-50°C) MTBF 207KHrs min,MIL-HDBK-217F(25°C) Vibration 10~500Hz, 2G10min./1cycle, period for 60min. each along X, Y, Z axes PHYSICAL SPECIFICATIONS Size 215x115 x 50mm (8.46”x4.53 ”x1.97”) Weight 38.80 oz (1100g) NOTE 1. Ripple & noise are measured at 20MHz of bandwidth by using a 12” twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 2. Tolerance : includes set up tolerance, line regulation and load regula- tion. 3. Derating may be needed under low input voltages. Please check the derating curve for more details. All specifications are typical at nominal input, full load, and 25°C unless other- wise noted
320W Single Output with PFC Function SP320 series WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458
320W Single Output with PFC Function SP320 series WWW.ASTRODYNETDI.COM ASTRODYNE USA: 1-800-823-8082 ASTRODYNE PACIFIC: 886-2-26983458