SP3076EEN

SP3070-3078E SIPEX | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 19

Technical content

Date: 03/28/05 SP3070E - SP3078E Family, ±15kV ESD-Protected, Failsafe RS-485/RS422 Transceivers © Copyright 2005 Sipex Corporation SP3070E - SP3078E Family ±15kV ESD-Protected, 3.3V, 1/8 Load, Failsafe RS-485/RS422 Transceivers

DESCRIPTION

FEATURES

■ ±15kV ESD protection for RS485 pins ■ 3.3V low-power operation ■ Advanced Receiver-failsafe protection for open, shorted or terminated lines ■ Up to 256 Transceivers may share Bus ■ Very low load for 8x greater fanout ■ Hot Swap glitch protection RE and DE ■ Thermal shutdown protects against driver contention ■ Available in three industry standard foot- prints ■ SP3070E, 3073 and 3076 in Full-Duplex (14 pin) ■ SP3071E, 3074 and 3077 in Full-Duplex (8 pin) ■ SP3072E, 3075 and 3078 in Half-Duplex (8 pin) ■ Three applications-optimized speed grades ■ SP3070-72E: 250kbps slew-limited ■ SP3073-75E: 500kbps slew-limited ■ SP3076-78E: 16Mbps high speed ■ Small form factor SO-narrow packages ■ Industrial (-40 to +85ºC) and Extended (-40 to +85ºC) temperature grades Now Available in Lead Free Packaging 4 5

8 PIN NSOIC

O A DI GND Z Y VCC NC RO RE DE DI GND

14 Pin NSOIC

A B Z Y NCGND 7 8

APPLICATIONS

■ Industrial Control, Utility Meters Building Automation, Instrumentation, Point of Sale The SP3070-3078E differential line transceivers are suitable for bidirectional communication on balanced multipoint bus transmission lines and comply with both RS485 and RS422 EIA Standards. Each device consists of a differential driver and differential receiver. All devices operate from a 3.3V power supply. High receiver input impedance allows a large number of transceivers to share a common data bus while maintaining signal margin and without excessive loading or use of expensive repeaters. The high impedance driver output is maintained over the entire common-mode voltage range from -7 to +12V. Receivers will failsafe to logic 1 output when inputs are open, shorted or terminated. Drivers include built-in short-circuit protection and a thermal-overload shutdown to protect against excessive power dissipation from bus contention or cable faults. All RS485 inputs are ESD protected up to ±15kV (Air-Gap and Human Body Model) and up to ±8kV Contact discharge (IEC 1000-4-2). 4 5 B RO A GND VCC DE DI RE

Date: 03/28/05 SP3070E - SP3078E Family, ±15kV ESD-Protected, Failsafe RS-485/RS422 Transceivers © Copyright 2005 Sipex Corporation DEVICE ARCHITECTURE AND BLOCK DIAGRAMS VCC D R NC A B Z Y R NC NC DE REB GND GND 7 8 D D R A B Z Y R GND 4 5 D VCC D R A B RO GND DE VCC RE DI

14 Pin Full Duplex:

SP3070E, 250kbps slew limited SP3073E, 500kbps slew limited SP3076E, 16Mbps

8 Pin Full Duplex:

SP3071E, 250kbps slew limited SP3074E, 500kbps slew limited SP3077E, 16Mbps

8 Pin Half Duplex:

SP3072E, 250kbps slew limited SP3075E, 500kbps slew limited SP3078E, 16Mbps Devices are available in three industry standard architectures and footprints. In each footprint there are three speed grades available.

Date: 03/28/05 SP3070E - SP3078E Family, ±15kV ESD-Protected, Failsafe RS-485/RS422 Transceivers © Copyright 2005 Sipex Corporation These are stress ratings only and functional operation of the device at these ratings or any other above those indicated in the operation sections of the specifications below is not implied. Exposure to absolute maximum rating conditions for extended periods of time may affect reliability. V ABSOLUTE MAXIMUM RATINGS Unless otherwise noted VCC = +3.3 ±0.3V, ambient temperature TMIN < TA < TMAX. Typical values are at VCC = 3.3, ambient temperature TA = +25ºC. The ♦ denotes the specifications which apply over the full operating range unless otherwise noted. Continuous Power Dissipation at Ta = 70oC Operating Temperature Ranges tuptuOrevirDlaitnereffiDV DO 2V CC V 1erugiF,)224-SR(Ω001=LR 5.1V CC 1erugiF,)584-SR(Ω45=LR foedutingaMniegnahC egatloVtuptuOlaitnereffiD V∆ DO 2.0V ♦♦♦♦♦ 1erugiF,Ω001ro45=LR tuptuOedoMnommoCrevirD egatloV V CO V CC 2/3 V ♦♦♦♦♦ 1erugiF,Ω001ro45=LR foedutingaMniegnahC tuptuOedoMnommoC egatloV V∆ CO 2.0±V 1 erugiF,Ω001ro45=LR egatloVhgiHtupnIV HI 2V ♦♦♦♦♦ ER,ID,ED egatloVwoLtupnIV LI 8.0V E R,ID,ED siseretsyHtupnIV SYH 001V m ♦♦♦♦♦ ER,ID,ED tnerruCtupnII NI 1-1 A µ ♦♦♦♦♦ ER,ID,ED tsriFecnadepmItupnI )pawstoH(noitisnarT 10 1 Ωk ♦♦♦♦♦ ER,ED eromwardlliwnoitisnarttsriF )pawstoH(tnerruc )ZdnaY(egakaeLtuptuO )BdnaA(xelpuDlluF IO 521+ Aµ V CC V6.3roDNG= V NI V21+= tnerruCtiucriC-trohSrevirDI DSO 00 52± AmV ≤V7- TUO )A4erugiF(,V21≤ 052-0

Date: 03/28/05 SP3070E - SP3078E Family, ±15kV ESD-Protected, Failsafe RS-485/RS422 Transceivers © Copyright 2005 Sipex Corporation

ELECTRICAL CHARACTERISTICS

Unless otherwise noted VCC = +3.3 ±0.3V, ambient temperature TMIN < TA < TMAX. Typical values are at VCC = 3.3, ambient temperature TA = +25ºC. The ♦ denotes the specifications which apply over the full operating range unless otherwise noted. SRETEMARAPM YSN IMP YTX AMS TINU ♦♦♦♦♦ SNOITIDNOC )BdnaA(tnerruCtupnI xelpuDflaH I B,A 521 V CC 6.3roDNG= V NI V21+= 001-V NI V7-= dlohserhTnwodtuhS-lamrehTT ST 561C º ♦♦♦♦♦ siseretsyHnwodtuhSlamrehTT HST 51C º ♦♦♦♦♦ REVIECER dlohserhTlaitnereffiDrevieceR )ytivitisneS( V HT 002-5 21-0 5-V m ≤V7-V MC V21≤ siseretsyHtupnIrevieceRV ∆ HT 51V m ♦♦♦♦♦ V0=bV+aV egatloVhgiHtuptuOORV HO -ccV egatloVwoLtuptuOORV LO 4.0V ♦♦♦♦♦ IO Am1= tatnerruCtuptuOetatS-irT revieceR I RZO 1-/+A µ ♦♦♦♦♦ V≤0 O V≤ CC ecnatsiseRtupnIrevieceRR NI 69 Ωk ♦♦♦♦♦ V≤V7- MC V21≤ tiucriC-trohStuptuOrevieceR tnerruC I RZO 06±A mV ≤V0 OR V≤ CC TNERRUCYLPPUS tnerruCylppuSI CC 8.05 .1 V=ED,0=ER,daoLoN CC 8.05 .1V =ER,daoLoN CC V=ED, CC 8.05 .10 =ED,0=ER,daoLoN nwodtuhSnitnerruCylppuS edom I NDHS 50.03A µV =ER CC DNG=ED, NOITCETORPDSE Bdna,A,Z,YrofnoitcetorPDSE 51± ledoMydoBnamuH 51±) 2-4-0001CEI(paGriA 8±) 2-4-0001CEI(tcatnoC

Date: 03/28/05 SP3070E - SP3078E Family, ±15kV ESD-Protected, Failsafe RS-485/RS422 Transceivers © Copyright 2005 Sipex Corporation RECEIVER SWITCHING CHARACTERISTICS DRIVER SWITCHING CHARACTERISTICS SCITSIRETCARAHCGNIHCTIWSREVIRDE2703PS&E1703PS,E0703PS RETEMARAPL OBMYS. NIM. PYT. XAMS TINUS NOITIDNOC yaleDnoitagaporPrevirD t HLPD 052- 0 051s n CL R,Fp05= L ,Ω45= 3&2erugiFt LHPD 052- 0 051s n roesiRtuptuOlaitnereffiDrevirD emiTllaF t ,RD t FD 053- 0 061s n CL R,Fp05= L ,Ω45= 3&2erugiF wekStuptuOlaitnereffiDrevirD t( HLPD t- LHPD ) t WEKSD -- 0 02s n CL R,Fp05= L ,Ω45= 3&2erugiF etaRataDmumixaM0 52- - s pbk hgiHtuptuOotelbanErevirDt HZD -- 0 052s n4 erugiF woLtuptuOotelbanErevirDt LZD -- 0 052s n5 erugiF woLmorfemiTelbasiDrevirDt ZLD -- 0 01s n5 erugiF hgiHmorfemiTelbasiDrevirDt ZHD -- 0 01s n4 erugiF otnwodtuhSmorfelbanErevirD hgiHtuptuO t )NDHS(HZD -- 0 055s n4 erugiF otnwodtuhSmorfelbanErevirD woLtuptuO t )NDHS(LZD -- 0 055s n5 erugiF nwodtuhSotemiTt NDHS 050 020 06s n Unless otherwise noted VCC = +3.3 ±0.3V, ambient temperature TMIN < TA < TMAX. Typical values are at VCC = 3.3, ambient temperature TA = +25ºC. Unless otherwise noted VCC = +3.3 ±0.3V, ambient temperature TMIN < TA < TMAX. Typical values are at VCC = 3.3, ambient temperature TA = +25ºC. 2703PS&1703PS,0703PSscitsiretcarahCgnihctiwSrevieceR RETEMARAPL OBMYS. NIM. PYT. XAMS TINUS NOITIDNOC yaleDnoitagaporPrevieceR t HLPR -- 0 02s n CL 7&6erugiF,Fp51= t LHPR -- 0 02s n t(wekStuptuOrevieceR HLPD t- LHPD )t WEKSR -- 0 3s nC L 7&6erugiF,Fp51= etaRataD0 52- - s pbk hgiHtuptuOotelbanErevieceRt HZR -- 0 5s n8 erugiF woLtuptuOotelbanErevieceRt LZR -- 0 5s n8 erugiF woLmorfemiTelbasiDrevieceRt ZLR -- 0 02s n8 erugiF hgiHmorfemiTelbasiDrevieceRt ZHR -- 0 01s n8 erugiF otnwodtuhSmorfelbanErevieceR hgiHtuptuO t )NDHS(HZR -- 0 004s n8 erugiF otnwodtuhSmorfelbanErevieceR woLtupttuO t )NDHS(LZR -- 0 004s n8 erugiF

Date: 03/28/05 SP3070E - SP3078E Family, ±15kV ESD-Protected, Failsafe RS-485/RS422 Transceivers © Copyright 2005 Sipex Corporation RECEIVER SWITCHING CHARACTERISTICS DRIVER SWITCHING CHARACTERISTICS Unless otherwise noted VCC = +3.3 ±0.3V, ambient temperature TMIN < TA < TMAX. Typical values are at VCC = 3.3, ambient temperature TA = +25ºC. Unless otherwise noted VCC = +3.3 ±0.3V, ambient temperature TMIN < TA < TMAX. Typical values are at VCC = 3.3, ambient temperature TA = +25ºC. 5703PS&4703PS,3703PSscitsiretcarahCgnihctiwSrevieceR RETEMARAPL OBMYS. NIM. PYT. XAMS TINUS NOITIDNOC yaleDnoitagaporPrevieceR t HLPR -- 0 02s n CL 7&6erugiF,Fp51= t LHPR -- 0 02s n t(wekStuptuOrevieceR HLPD t- LHPD )t WEKSR -- 0 3s nC L 7&6erugiF,Fp51= etaRataDmumixaM0 05- - s pbk hgiHtuptuOotelbanErevieceRt HZR -- 0 5s n8 erugiF woLtuptuOotelbanErevieceRt LZR -- 0 5s n8 erugiF woLmorfemiTelbasiDrevieceRt ZLR -- 0 5s n8 erugiF hgiHmorfemiTelbasiDrevieceRt ZHR -- 0 5s n8 erugiF otnwodtuhSmorfelbanErevieceR hgiHtuptuO t )NDHS(HZR -- 0 004s n8 erugiF otnwodtuhSmorfelbanErevieceR woLtupttuO t )NDHS(LZR -- 0 004s n8 erugiF nwodtuhSotemiTt NDHS 050 020 06s n SCITSIRETCARAHCGNIHCTIWSREVIRDE5703PS&E4703PS,E3703PS RETEMARAPL OBMYS. NIM. PYT. XAMS TINUS NOITIDNOC yaleDnoitagaporPrevirD t HLPD 081-0 08s n CL R,Fp05= L ,Ω45= 3&2erugiFt LHPD 081-0 08s n roesiRtuptuOlaitnereffiDrevirD emiTllaF t ,RD t FD 002-0 08s n CL R,Fp05= L ,Ω45= 3&2erugiF wekStuptuOlaitnereffiDrevirD t( HLPD t- LHPD ) t WEKSD -- 0 01s n CL R,Fp05= L ,Ω45= 3&2erugiF etaRataD0 05- - s pbk hgiHtuptuOotelbanErevirDt HZD -- 0 052s n4 erugiF woLtuptuOotelbanErevirDt LZD -- 0 052s n5 erugiF woLmorfemiTelbasiDrevirDt ZLD -- 0 01s n5 erugiF hgiHmorfemiTelbasiDrevirDt ZHD -- 0 01s n4 erugiF otnwodtuhSmorfelbanErevirD hgiHtuptuO t )NDHS(HZD -- 0 054s n4 erugiF otnwodtuhSmorfelbanErevirD woLtuptuO t )NDHS(LZD -- 0 054s n5 erugiF nwodtuhSotemiTt NDHS 050 020 06s n

Date: 03/28/05 SP3070E - SP3078E Family, ±15kV ESD-Protected, Failsafe RS-485/RS422 Transceivers © Copyright 2005 Sipex Corporation DRIVER SWITCHING CHARACTERISTICS Unless otherwise noted Vcc=+3.3±0.3V, ambient temperature Tmin < Ta < Tmax. Typical values are at Vcc = 3.3, ambient temperature Ta = +25ºC RECEIVER SWITCHING CHARACTERISTICS Unless otherwise noted Vcc=+3.3±0.3V, ambient temperature Tmin < Ta < Tmax. Typical values are at Vcc = 3.3, ambient temperature Ta = +25ºC SCITSIRETCARAHCGNIHCTIWSREVIRDE8703PS&E7703PS,E6703PS RETEMARAPL OBMYS. NIM. PYT. XAMS TINUS NOITIDNOC yaleDnoitagaporPrevirD t HLPD -- 0 5s n CL R,Fp05= L ,Ω45= 3&2erugiFt LHPD -- 0 5s n roesiRtuptuOlaitnereffiDrevirD emiTllaF t ,RD t FD -- 5 1s n CL R,Fp05= L ,Ω45= 3&2erugiF wekStuptuOlaitnereffiDrevirD t( HLPD t- LHPD ) t WEKSD --8 s n CL R,Fp05= L ,Ω45= 3&2erugiF etaRataD6 1-- s pbM hgiHtuptuOotelbanErevirDt HZD -- 0 51s n4 erugiF woLtuptuOotelbanErevirDt LZD -- 0 51s n5 erugiF woLmorfemiTelbasiDrevirDt ZLD -- 0 01s n5 erugiF hgiHmorfemiTelbasiDrevirDt ZHD -- 0 01s n4 erugiF otnwodtuhSmorfelbanErevirD hgiHtuptuO t )NDHS(HZD -- 0 081s n4 erugiF otnwodtuhSmorfelbanErevirD woLtuptuO t )NDHS(LZD -- 0 081s n5 erugiF nwodtuhSotemiTt NDHS 050 020 06s n 8703PS&7703PS,6703PSscitsiretcarahCgnihctiwSrevieceR RETEMARAPL OBMYS. NIM. PYT. XAMS TINUS NOITIDNOC yaleDnoitagaporPrevieceR t HLPR -0 45 7s n CL ,7&6erugiF,Fp51= Cº58+ot04-t LHPR -0 45 7s n t(wekStuptuOrevieceR HLPD t- LHPD )t WEKSR --8 s nC L ,7&6erugiF,Fp51= etaRataD6 1-- s pbM hgiHtuptuOotelbanErevieceRt HZR -- 0 6s nC º58+ot04-,8erugiF woLtuptuOotelbanErevieceRt LZR -- 0 6s nC º58+ot04-,8erugiF woLmorfemiTelbasiDrevieceRt ZLR -- 0 5s n8 erugiF hgiHmorfemiTelbasiDrevieceRt ZHR -- 0 5s n8 erugiF otnwodtuhSmorfelbanErevieceR hgiHtuptuO t )NDHS(HZR -- 0 081s n8 erugiF otnwodtuhSmorfelbanErevieceR woLtuptuO t )NDHS(LZR -- 0 081s n8 erugiF nwodtuhSotemiTt NDHS 050 020 06s n

Date: 03/28/05 SP3070E - SP3078E Family, ±15kV ESD-Protected, Failsafe RS-485/RS422 Transceivers © Copyright 2005 Sipex Corporation FUNCTION TABLES )xelpuDlluF(E6703PS,E3703PS,E0703PS GNITTIMSNART stupnIs tuptuO ERE DI DZY X11 01 X1 01 0 00X Z -hgiH 10X n wodtuhS )xelpuDlluF(E6703PS,E3703PS,E0703PS GNIVIECER stupnIt uptuO ERE DB ,AO R 0X V m05-≥ 1 0X V m002-≤ 0 XX , nepO detrohS

11 X Z -hgiH

10 X n wodtuhS

)xelpuDflaH(E8703PS,E5703PS,E2703PS GNITTIMSNART stupnIs tuptuO ERE DI DZ /BY /A X11 01 X101 0 00X Z -hgiH 10X n wodtuhS )xelpuDflaH(E8703PS,E5703PS,E2703PS GNIVIECER stupnIt uptuO ERE DB ,AO R 0X V m05-≥ 1 0X V m002-≤ 0 XX d etrohs/nepO1 )xelpuDlluF(E7703PS,E4703PS,E1703PS GNITTIMSNART stupnIs tuptuO IDZ Y 10 1 01 0 )xelpuDlluF(E7703PS,E4703PS,E1703PS GNIVIECER stupnIt uptuO B,AO R Vm05-≥ 1 Vm002-≤ 0 detrohs/nepO1

Date: 03/28/05 SP3070E - SP3078E Family, ±15kV ESD-Protected, Failsafe RS-485/RS422 Transceivers © Copyright 2005 Sipex Corporation PIN DESCRIPTION XELPUDLLUF SECIVED FLAH XELPUD SECIVED NIP EMAN NOITCNUFNIP E0703PSE 1703PSE 2703PS E3703PSE 4703PSE 5703PS E6703PSE 7703PSE 8703PS REBMUNNIP 22 1 O R ≥)B–A(fidnawolsiERnehW.tuptuOrevieceR .wolsiOR,Vm002-≤)B–A(fI.hgiHsiOR,Vm05- 3- 2E R .delbanesiOR,wolsiERnehW.elbanEtuptuOrevieceR ebdluohsER.ecnadepmihgihsiOR,hgihsiERnehW -tohasiER.edomnwodtuhsretneotwolEDdnahgih .tupnipaws 4- 3 E D erastuptuo,hgihsiEDnehW.elbanEtuptuOrevirD ED.ecnadepmihgiherastuptuo,wolsiEDnehW.delbane siED.edomnwodtuhsretneothgihERdnawolebdluohs .tupnipaws-toha 53 4 I D secrofIDnolevelwola,hgihEDhtiW.tupnIrevirD ,ylralimiS.hgihtuptuognitrevnidnawoltuptuognitrevninon dnahgihtuptuognitrevninonsecrofIDnolevelhgiha .woltuptuognitrevni 7,64 5 D NGd nuorG 95 - Y t uptuOrevirDgnitrevninoN 016- Z t uptuOrevirDgnitrevnI 117 - B t upnIrevieceRgnitrevnI --7 B t uptuOrevirDgnitrevnIdnatupnIrevieceRgnitrevnI 218- A t upnIrevieceRgnitrevninoN --6 A revirDgnitrevninoNdnatupnIrevieceRgnitrevninoN tuptuO 411 8 V CC ylppuSevitisoPV CC ssapyB.V CC Fu1.0ahtiwDNGot .roticapac 31,8,1- - C Nt cennoCoN

Date: 03/28/05 SP3070E - SP3078E Family, ±15kV ESD-Protected, Failsafe RS-485/RS422 Transceivers © Copyright 2005 Sipex Corporation DETAILED DESCRIPTION The SP307XE family of high speed transceiv- ers for RS-485/RS-422 communication con- tain one driver and one receiver. These devices feature fail-safe circuitry, which guar- antees a logic-high receiver output when the receiver inputs are open or shorted, or when they are connected to a terminated transmis- sion line with all drivers disabled. The SP3070E, SP3072E, SP3073E, SP3075E, SP3076E and SP3078E also feature a hotswap capability allowing live insertion with- out error data transfer. The SP3070E, SP3071E and SP3072E feature reduced slew- rate drivers that minimize EMI and reduce reflections caused by improperly terminated cables, allowing error-free data transmission up to 250kbps. The SP3073E, SP3074E and SP3075E also offer slew -rate limits allowing transmit speeds up to 500kbps. The SP3076E, SP3077E, SP3078E driver slew rates are not limited, making transmit speeds up to 16Mbps possible. The SP3072E, SP3075E and SP3078E are half-duplex transceivers, while the SP3070E, SP3071E, SP3073E, SP3074E, SP3076E, and SP3077E are full duplex transceivers. All devices operate from a single 3.3V supply. Drivers are output short-circuit current limited. Thermal-shutdown circuitry protects drivers against excessive power dissipation. When activated, the thermal-shutdown circuitry places the driver outputs into a high-imped- ance state. RECEIVER INPUT FILTERING SP3070-SP3075 receivers incorporate input filtering in addition to input hysteresis. This filtering enhances noise immunity with differ- ential signals that have very slow rise and fall times. Receiver propagation delay increases by 25% due to this filtering. FAIL SAFE The SP3070 family guarantees a logic-high receiver output when the receiver inputs are shorted, open, or when they are connected to a terminated transmission line with all drivers disabled. If A - B is less than or equal to - 200mV, RO is logic low. In the case of a terminated bus with all transmitters disabled the receiver's differential input voltage is pulled to 0V by the termination. With the receiver thresholds of the SP3070E family, this results in a logic high with a 50mV minimum noise margin. In compliance with the EIA/TIA-485 standard, the SP3070E family has a 50mV - 200mV threshold. HOT-SWAP CAPABILITY When circuit boards are inserted into a hot backplane, differential disturbances to the data bus can lead to data errors. Upon initial circuit board insertion, the data communica- tion processor undergoes its own power-up sequence. During this period, the processor's logic-output drivers are high impedance and are unable to drive the DE and RE inputs of these devices to a defined logic level. Leak- age currents up to 10µA from the high-imped- ance state of the processor's logic drivers could cause standard CMOS enable inputs of a transceiver to drift to an incorrect logic level. Additionally, parasitic circuit board capaci- tance could cause coupling of VCC or GND to the enable inputs. Without the hot-swap capa- bility, these factors could improperly enable the transceiver's driver or receiver. When VCC rises, an internal pulldown circuit holds DE low and RE high for approximately 10 microseconds. After the initial power-up sequence, the pulldown circuit becomes trans- parent, resetting the hot-swap tolerable input. 15KV ESD PROTECTION As with all Sipex devices, ESD-protection structures are incorporated on all pins to protect against electrostatic discharges en- countered during handling and assembly. The driver output and receiver inputs of the SP3070E family of devices have extra protec- tion against static electricity. Sipex's engi- neering team have developed state of the art structures to protect these pins against ESD of 15kV without damage. The ESD structures withstand high ESD in all states: normal op- DETAILED DESCRIPTION

Date: 03/28/05 SP3070E - SP3078E Family, ±15kV ESD-Protected, Failsafe RS-485/RS422 Transceivers © Copyright 2005 Sipex Corporation eration, shutdown, and powered down. After an ESD event, the SP3070E - SP3078E keep working without latchup or damage. ESD protection can be tested in various ways. The transmitter outputs and receiver inputs of the SP3070E - SP3078E are characterized for protection to the following limits: ■ ±15kV using the Human Body Model ■ ±8kV using the Contact Discharge method specified in IEC 1000-4-2 ■ ±15kV Airgap ESD TEST CONDITIONS ESD performance depends on a variety of conditions. Contact Sipex for a reliability report that documents test setup, method- ology and results. IEC 1000-4-2 The IEC 1000-4-2 standard covers ESD testing and performance of finished equip- ment. However, it does not specifically refer to integrated circuits. The SP3070E family of devices helps you design equipment to meet IEC 1000-4-2, without the need for additional ESD-protection components. The major difference between tests done using the Human Body Model and IEC 1000- 4-2 is higher peak current in IEC 1000-4-2, because series resistance is lower in the IEC 1000-4-2 model. Hence, the ESD with- stand voltage measured to EC 1000-4-2 is generally lower than that measured using the human body model. The air-gap test involves approaching the device with a charged probe. The contact- discharge method connects the probe to the device before the probe is energized. MACHINE MODEL The machine model for ESD tests all pins using a 200pF storage capacitor and zero discharge resistance. The objective is to emulate the stress caused when I/O pins are contacted by handling equipment during test and assembly. DETAILED DESCRIPTION

256 TRANSCEIVERS ON THE BUS

The standard RS-485 receiver input imped- ance is 12kΩ (1 unit load), and the standard driver can drive up to 32 unit loads. The SP3070E family of transceivers has a 1/8- unit load receiver input impedance (96 Ω), allowing up to 256 transceivers to be con- nected in parallel on one communication line. Any combination of these devices as well as other RS-485 transceivers with a total of 32 unit loads or fewer can be con- nected to the line. REDUCED EMI AND REFLECTIONS The SP3070E, SP3071E and SP3072E fea- ture reduced slew-rate drivers that minimize EMI and reduce reflections caused by im- properly terminated cables, allowing error- free data transmission up to 250kbps. The SP3073, SP3074 and SP3075 offer higher driver output slew-rate limits, allowing trans- mit speeds up to 500kbps. LOW POWER SHUTDOWN MODE Low-power shutdown mode is initiated by bringing both RE high and DE low. In shut- down, the devices typically draw only 50nA of supply current. RE and DE can be driven simultaneously; the parts are guaranteed not to enter shut- down if RE is high and DE is low for less than 50ns. If the inputs are in this state for at least 600ns, the parts are guaranteed to enter shutdown. Enable times t ZH and tZL assume the part was not in a low-power shutdown state. Enable times t ZH(SHDN) and tZL(SHDN) assume the parts were shut down. It takes drivers and receivers longer to become enabled from low-power shutdown mode t ZH(SHDN) and tZL(SHDN) than from driver/receiver-dis- able mode (tZH, tZL)

Date: 03/28/05 SP3070E - SP3078E Family, ±15kV ESD-Protected, Failsafe RS-485/RS422 Transceivers © Copyright 2005 Sipex Corporation DRIVER OUTPUT PROTECTION Two mechanisms prevent excessive output current and power dissipation caused by faults or by bus contention. First, current limit on the ouput stage, provides immediate protection against short circuits over the whole common-mode voltage range. Sec- ond, a thermal-shutdown circuit, forces the driver outputs into a high-impedance state if the die temperature becomes excessive. LINE LENGTH The RS-485/RS422 standard covers line lengths up to 4000ft. DETAILED DESCRIPTION TYPICAL APPLICATIONS The SP3072E, SP3075E and SP3078E transceivers are designed for bidirectional data communications on multipoint bus trans- mission lines. To minimize reflections, terminate the line at both ends in its characteristic impedance, and keep stub lengths off the main line as short as possible. The slew-rate-limited SP3070 - SP3075E are more tolerant of imperfect termination. PARTS SELECTOR GUIDE TRAP REBMUN lluF/flaH xelpuD etarataD spbM -tuhS nwod revieceR elbanErevirD .snarT suBnO niP tnuoC dradnatSyrtsudnI tuoniP niP elbitapmoC :morfedargpU E0703PSl luF5 2.0s eYs eY6 524 10 8157,E0703XAM E1703PSl luF5 2.0o No N6 528 9 7157,E1703XAM3 943PS E2703PSf laH5 2.0s eYs eY6 528 6 7157,E2703XAM3 843PS E3703PSl luF5 .0s eYs eY6 524 10 8157,E3703XAM E4703PSl luF5 .0o No N6 528 9 7157,E4703XAM E5703PSf laH5 .0s eYs eY6 528 6 7157,E5703XAM4 943PS E6703PSl luF6 1s eYs eY6 524 10 8157,E6703XAM1 943PS E7703PSl luF6 1o No N6 528 9 7157,E7703XAM0 943PS E8703PSf laH6 1s eYs eY 6528 67157,E8703XAM, 5843PS 1843PS

Date: 03/28/05 SP3070E - SP3078E Family, ±15kV ESD-Protected, Failsafe RS-485/RS422 Transceivers © Copyright 2005 Sipex Corporation PACKAGE: 8 PIN NSOIC A A1 A2 SIDE VIEW Seating Plane SECTION B-B WITH PLATING SYMBOL MIN NOM MAX A 1.35 - 1.75 A1 0.1 - 0.25 A2 1.25 - 1.65 b 0.31 - 0.51 c 0.17 - 0.24 D E e L 0.4 - 1.27 ø0 º - 8 º ø1 5º - 15º Note: Dimensions in (mm)

8 Pin NSOIC JEDEC MO-012 (AA) Variation

4.90 BSC

6.00 BSC

3.90 BSC

1.27 BSC

1.04 REF

0.25 BSC

L ØØ1 Ø Seating Plane VIEW C TOP VIEW b SEE VIEW C B B E E/2 INDEX AREA (D/2 X E1/2) E1/2 D e c BASE METAL b

Date: 03/28/05 SP3070E - SP3078E Family, ±15kV ESD-Protected, Failsafe RS-485/RS422 Transceivers © Copyright 2005 Sipex Corporation PACKAGE: 14 PIN NSOIC TOP VIEW b Gauge PlaneL1 L ØØ1 Ø Seating Plane VIEW C SEE VIEW C B B SECTION B-B WITH PLATING c BASE METAL b A A1 SYMBOL MIN NOM MAX A 1.35 - 1.75 A1 0.1 - 0.25 A2 1.25 - 1.65 b 0.31 - 0.51 c 0.17 - 0.25 D E e L 0.4 - 1.27 ø0 º - 8 º ø1 5º - 15º Note: Dimensions in (mm)

14 Pin NSOIC JEDEC MO-012 (AB) Variation

8.65 BSC

E E/2 INDEX AREA (D/2 X E1/2) E1/2 D e SIDE VIEW Seating Plane

Date: 03/28/05 SP3070E - SP3078E Family, ±15kV ESD-Protected, Failsafe RS-485/RS422 Transceivers © Copyright 2005 Sipex Corporation Corporation ANALOG EXCELLENCE Sipex Corporation Headquarters and Sales Office

233 South Hillview Drive

Milpitas, CA 95035 TEL: (408) 934-7500 FAX: (408) 935-7600 Model Temperature Range Package

ORDERING INFORMATION

For availability of PDIP or other packaging contact factory. Available in lead free packaging. To order add “-L” suffix to part number. Example: SP3074EEN/TR = standard; SP3074EEN-L/TR = lead free /TR = Tape and Reel Pack quantity is 2,500 for NSOIC. CLICK HERE TO ORDER SAMPLES