SP3019

SP3019 LITTELFUSE | Alldatasheet

Document overview

• Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
• PDF pages: 5

Technical content

Features

• ESD, IEC 61000-4-2, +22kV/-10kV contact, +22kV/-10kV air
• EFT, IEC 61000-4-4, 40A (tP=5/50ns)
• Lightning, 2.5A (8/20 as defined in IEC 61000-4-5 nd edition)
• Low capacitance of 0.3pF @0V , 3GHz (TYP) per I/O
• Low leakage current of 10nA (TYP) at 5V
• AEC-Q101 qualified
• Moisture Sensitivity Level (MSL -1)
• Halogen free, lead free and RoHS compliant
• LCD/PDP TVs
• External Storages
• DVD/Blu-ray Players
• Desktops
• MP3/PMP
• Set Top Boxes
• Smartphones
• Ultrabooks/Notebooks
• Digital Cameras Pinout Functional Block Diagram Life Support Note: Not Intended for Use in Life Support or Life Saving Applications The products shown herein are not designed for use in life sustaining or life saving applications unless otherwise expressly indicated. SP3019 0.3pF SOT23-6L 4 Channels Diode Array RoHS Pb GREEN PIN 14 PIN 13 PIN 8 PIN 10 PIN 9 PIN 11 PIN 12 PIN 1 PIN 2 PIN 4 PIN 5 GND (PIN 3, 8) SP3012-04UTG GND (PIN 2) PIN 1 PIN 4 PIN 5 SP3012-03UTG SP3012-06UTG PIN 1 PIN 3 PIN 4 PIN 6 GND (PIN 2) SP3012-04HTG SP3012-06UTG (AEC-Q101 Qualified) SP3012-03UTG 6 7 8 9 10 SP3012-04UTG (AEC-Q101 Qualified) SP3012-04HTG(AEC-Q101 Qualified) 3 2 1 4 5 6 5 4 3 2 1 1 2 3 6 5 4 *Pins 6, 7, 9, 10 are not internally connected but should be connected to the trace. *Pins 1, 2, 3, 4, 5, 6, 7 are not internally connected but should be connected to the opposite pin with the PCB trace. SP3019

©2018 Littelfuse, Inc. Specifications are subject to change without notice. TVS Diode Arrays (SPA ® Diodes) Revision: 01/25/18 TVS Diode Arrays (SPA® Diodes) Low Capacitance ESD Protection - SP3012 Series SP3012 CAUTION: Stresses above those listed in “Absolute Maximum Ratings” may cause permanent damage to the component. This is a stress only rating and operation of the component at these or any other conditions above those indicated in the operational sections of this specification is not implied. Absolute Maximum Ratings Symbol Parameter Value Units IPP Peak Current (tp=8/20μs) 2.5 A TOP Operating Temperature -40 to 125 °C TSTOR Storage Temperature -55 to 150 °C Electrical Characteristics (TOP=25ºC) Parameter Symbol Test Conditions Min Typ Max Units Reverse Standoff Voltage VRWM IR ≤ 1µA 5.0 V Breakdown Voltage VBR VR=5V, Any I/O to GND 0.01 0.50 µA Reverse Voltage Drop VR IR=1mA 8.2 V Clamp Voltage1 VC IPP=1A, tp=8/20µs, Fwd 10.5 V IPP=2A, tp=8/20µs, Fwd 11. 5 V Dynamic Resistance2 RDYN TLP , tP=100ns, I/O to GND 0.64 Ω ESD Withstand Voltage1 VESD IEC 61000-4-2 (Contact) +22/-10 kV IEC 61000-4-2 (Air) +22/-10 kV Diode Capacitance CI/O-GND Reverse Bias=0V , f=3 GHz 0.3 pF CI/O-I/O 0.18 SP3019 Note: 1 . Parameter is guaranteed by design and/or component characterization. 2.Transmission Line Pulse (TLP) with 100ns width, 2ns rise time, and average window t1=70ns to t2= 90ns Positive T ransmission Line Pulsing(TLP) Plot 05 10 15 20 25 30 35 TLP Voltage (V) TLP Current (A) Positive T ransmission Line Pulsing(TLP) Plot -20 -15 -10 TLP Voltage (V) TLP Current (A)

©2018 Littelfuse, Inc. Specifications are subject to change without notice. TVS Diode Arrays (SPA ® Diodes) Revision: 01/25/18 TVS Diode Arrays (SPA® Diodes) Low Capacitance ESD Protection - SP3012 Series Clamping Voltage vs. IPP for 8/20 μS waveshape 11 .5 22 .5 Clamp Voltage (VC) Peak Pulse Current-IPP (A) IEC 61000-4-2 +8 kV Contact ESD Clamping Voltage IEC 61000-4-2 -8 kV Contact ESD Clamping Voltage 8/20 μs Pulse Waveform 10% 20% 30% 40% 50% 60% 70% 80% 90% 100% 110% Time (/uni03BCs) Pe rcen t of IPP SP3019

©2018 Littelfuse, Inc. Specifications are subject to change without notice. TVS Diode Arrays (SPA ® Diodes) Revision: 01/25/18 TVS Diode Arrays (SPA® Diodes) Low Capacitance ESD Protection - SP3012 Series Time Temperature TP TL TS(max) TS(min) tP tL tS time to peak temperature PreheatPreheat Ramp-upRamp-up Ramp-downRamp-do Critical Zone TL to TP Critical Zone TL to TP Reflow Condition Pb – Free assembly Pre Heat - Temperature Min (Ts(min)) 150°C - Temperature Max (Ts(max)) 200°C - Time (min to max) (ts) 60 – 180 secs Average ramp up rate (Liquidus) Temp (TL) to peak 3°C/second max TS(max) to TL - Ramp-up Rate 3°C/second max Reflow - Temperature (TL) (Liquidus) 217°C - Temperature (tL) 60 – 150 seconds Peak Temperature (TP) 260+0/-5 °C Time within 5°C of actual peak Temperature (tp) 20 – 40 seconds Ramp-down Rate 6°C/second max Time 25°C to peak Temperature (TP) 8 minutes Max. Do not exceed 260°C Soldering Parameters Part Numbering SystemPart Marking System SP 3019 04 T G Series Package T= Tape & Reel G= Green Number of Channels TVS Diode Arrays (SPA Diodes) SOT23-6L H ACVD 1 2 3 6 5 4 AC : Part code V : Assembly code D : Date code Part Number Package Marking Min. Order Qty. SP3019-04HTG SOT23-6 ACVD 3000

Ordering Information

Lead Material Copper Alloy Lead Coplanarity 0.0004 inches (0.102mm) Substrate material Silicon Body Material Molded Compound Flammability UL Recognized compound meeting flammability rating V-0. Notes : 1 . All dimensions are in millimeters 2. Dimensions include solder plating. 3. Dimensions are exclusive of mold flash & metal burr.

©2018 Littelfuse, Inc. Specifications are subject to change without notice. TVS Diode Arrays (SPA ® Diodes) Revision: 01/25/18 TVS Diode Arrays (SPA® Diodes) Low Capacitance ESD Protection - SP3012 Series Embossed Carrier T ape & Reel Specification — SOT23-6L 8mm TAPE AND REEL GENERAL INFORMATION 1. 3000 PIECES PER REEL. 2. ORDER IN MULTIPLES OF FULL REELS ONLY. 3. MEETS EIA-481 REVISION "A" SPECIFICATIONS. 2.0mm 4.0mm CL 1.75mm1.5mm DIA. HOLE 8mm 4.0mm 8.4mm 180mm 14.4mm 13mm 60mm ACCESS HOLE COVER TAPE USER DIRECTION OF FEED PIN 1 SOT-23 (8mm POCKET PITCH) Recommended soldering pad layout (unit :mm) 0.95 0.850.85 0.33 0.60 0.95 Section B-B D e b x 6 A Pin1 b c Top View Bottom View E B B Side View Detail A Detail A L L L2 (gauge plane) θ Symbol Millimeters Min Nom Max A - - 1 .45 A1 0.00 - 0.15 A2 0.90 1. 15 1 .30 b 0.30 - 0.50 b1 0.30 0.40 0.45 c 0.08 - 0.22 c1 0.08 0.13 0.20 D 2.75 2.90 3.05 E 2.60 2.80 3.00 E1 1 .45 1 .60 1.75 e 0.95 BSC e1 1 .90 BSC L 0.30 0.50 0.60 L1 0.60 REF L2 0.25 BSC θ 0° 4° 8° Disclaimer Notice - Information furnished is believed to be accurate and reliable. However, users should independently evaluate the suitability of and test each product selected for their own applications. Littelfuse products are not designed for, and may not be used in, all applications. Read complete Disclaimer Notice at http://www.littelfuse.com/disclaimer-electronics. SP3019