SP200_11 ARIES | Alldatasheet

Document overview

  • Manufacturer or author: Provided By ALLDATASHEET.COM(FREE DATASHEET DOWNLOAD SITE)
  • PDF pages: 1

Technical content

Bristol, PA 19007-6810 USA TEL (215) 781-9956 • FAX (215) 781-9845 PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED

  • INFO@ARIESELEC.COMWWW.ARIESELEC.COM

FEATURES

  • These Shorting Plugs and Jacks are used in conjunction with Aries DIP Strips, available separately, for your programming needs. Consult Data Sheet 16007 and Data Sheet 16008 for details.
  • Convenient handle for insertion and withdrawal.
  • Jacks available in both RoHS and Sn/Pb versions SHORTING JACK (SJ200) SPECIFICATIONS
  • BODY MATERIAL: Black UL 94V-0 Glass-filled 4/6 Nylon
  • PIN BODY: Brass 360 1/2-hard per UNS C36000 ASTM-B16-00
  • PIN BODY PLATING: 200μ [5.08μm] min. Sn per ASTM B545 Type 1 over 100μ [2.54μm] min. Ni per SAE-AMS-QQ-N-290 -OR- 200μ [5.08μm] min. 93/7 Sn/Pb per ASTM B545 over 100μ [2.54μm] min. Ni per SAE-AMS-QQ-N-290
  • 4-FINGER COLLET CONTACT: Be-Cu per UNS C17200 ASTM-B194-01
  • CONTACT PLATING: 30μ [0.76μm] min. Au per MIL-G-45204 over 50μ [1.27μm] min. Ni per SAE-AMS-QQ-N-290
  • CONTACT CURRENT RATING: 8 amps
  • OPERATING TEMPERATURE: -67°F to 221°F [-55° to 105°C]
  • INSERTION FORCE: 240 grams/pin
  • WITHDRAWAL FORCE: 130 grams/pin
  • NORMAL FORCE: 210 grams/pin, based on a 0.040 [1.02] dia. test lead SHORTING PLUG (SP200) SPECIFICATIONS
  • BODY MATERIAL: Black UL 94V-0 Glass-filled 4/6 Nylon
  • PIN: Brass 260 1/4- or 1/2-hard
  • PIN PLATING:10μ [0.25μm] Au per MIL-G-45204 over 50μ [1.27μm] Ni per SAE-AMS-QQ-N-290
  • CONTACT CURRENT RATING: 5 amps
  • OPERATING TEMPERATURE: -67°F to 221°F [-55° to 105°C] 16009 1 of 1 Rev. AB Series SP200 & SJ200 0.040 [1.02] Shorting Plugs and Jacks CUSTOMIZATION: In addition to the standard products shown on this page, Aries specializes in custom design and production. Special materials, platings, sizes, and configurations can be furnished, depending on the quantity. NOTE: Aries reserves the right to change product general specifications without notice. ALL DIMENSIONS IN INCHES [MILLIMETERS] ALL TOLERANCES ±0.005 [±0.13] UNLESS OTHERWISE SPECIFIED

ORDERING INFORMATION

JACKS – Specify P/N SJ200 (RoHS) or P/N SJ200-TL (Sn/Pb) which are used with Aries MALE DIP STRIPS, Series M40, see DATA SHEET 16007 for details. PLUGS – Specify P/N SP200 which is used with Aries FEMALE DIP STRIPS, Series F40, see DATA SHEET 16008 for details.